Regulation compliance

Legionella risk assessments for landlords: the plumber's role

What HSE expects of landlords on legionella, why no test certificate is required, the temperature controls that matter and the services plumbers can offer.

Ava research teamPublished 6 min read

On this page
  1. What the law asks of landlords
  2. What the law does not ask for
  3. The temperature controls that matter
  4. Where plumbers add value
  5. Combining it with the gas safety visit
  6. Scotland is stricter on timing
  7. Vacant homes and voids
  8. Example: a one-bedroom flat between tenancies
  9. Words to avoid
  10. Frequently asked questions
  11. References

Key takeaways

  • Landlords must assess the legionella risk in their rented homes, but HSE says this does not require an in-depth, detailed assessment[1].
  • Health and safety law does not require a legionella test certificate, and testing is not usually needed for domestic systems[1].
  • The key controls are temperatures: cold water below 20°C, stored hot water at 60°C and hot outlets reaching 50°C within a minute[2].
  • In Scotland, private landlords must assess before first letting and review at intervals of no more than two years[3].

What the law asks of landlords

Legionella bacteria can grow in hot and cold water systems that are not kept at the right temperatures, and inhaling contaminated water droplets can cause Legionnaires' disease. Landlords of rented homes have a legal duty to manage that risk. HSE explains that section 3(2) of the Health and Safety at Work etc. Act 1974 makes provision for health and safety law to apply to landlords, and that the Control of Substances Hazardous to Health Regulations provide the framework for controlling hazardous substances, including biological agents such as legionella[1].

The duty is proportionate. HSE says the duty to assess the risk does not require an in-depth, detailed assessment[1], and that most landlords can assess the risk themselves without professional training or accreditation[1]. If they are not competent or would rather not, they can arrange for someone to do it for them[1]. That is where a plumber who understands hot and cold water systems becomes useful.

HSE's Approved Code of Practice L8 and its technical guidance HSG274 set out the wider framework for managing legionella. For most rented homes, though, HSE's own landlord guidance is the practical starting point, and it is what a sensible landlord or agent will expect you to follow.

What the law does not ask for

Landlords are regularly sold more than they need, and that damages trust in every contractor. HSE is clear on several points[1]:

  • Testing or sampling is not usually required for domestic hot and cold water systems; temperature monitoring is the reliable check.
  • Health and safety law does not require landlords to obtain or produce a legionella test certificate.
  • The law does not prescribe that the risk assessment is reviewed annually or every two years; it should be reviewed periodically in case anything changes.
  • Recording the assessment is only a statutory duty for employers with five or more employees, though keeping a record is wise.
  • HSE and local authority inspectors do not proactively inspect domestic premises for legionella.

None of this makes legionella unimportant. HSE notes that a landlord may still be prosecuted if a tenant contracts Legionnaires' disease from the water system, and would need to show the duty was met[1]. The aim is a sensible assessment and simple controls, not paperwork for its own sake.

The temperature controls that matter

For most domestic systems, temperature is the most reliable control. HSE's guidance on hot and cold water systems gives the figures plumbers work to: incoming and stored cold water should stay below 20°C, hot water should be stored at 60°C or above, and hot water should reach at least 50°C within one minute of running the tap[2]. The HSE landlord guidance sums it up as keeping the hot water hot, the cold water cold and keeping it moving[1].

Legionella control temperatures for hot and cold water systems
Legionella control temperatures for hot and cold water systemsColumn chart. Cold water: keep below: 20 °C; Hot water at outlets within 1 minute: at least: 50 °C; Stored hot water: at least: 60 °C.0 °C20 °C40 °C60 °CCold water: keep below: 20 °C20 °CCold water: keep belowHot water at outlets within 1 minute: at least: 50 °C50 °CHot water at outlets within 1minute: at leastStored hot water: at least: 60 °C60 °CStored hot water: at leastLegionella control temperatures for hot and cold water systemsColumn chart. Cold water: keep below: 20 °C; Hot water at outlets within 1 minute: at least: 50 °C; Stored hot water: at least: 60 °C.Cold water: keep belowCold water: keep below: 20 °C20 °CHot water at outlets within 1 minute:at leastHot water at outlets within 1 minute: at least: 50 °C50 °CStored hot water: at leastStored hot water: at least: 60 °C60 °C

Source: Health and Safety Executive, 2026[2]

Show the data
ItemValue
Cold water: keep below20 °C
Hot water at outlets within 1 minute: at least50 °C
Stored hot water: at least60 °C

These temperatures sit in tension with scald risk, which is why thermostatic mixing valves are often fitted at outlets used by vulnerable people. Storing hot and blending at the point of use lets you control both risks; our guide to TMV installation and servicing covers that balance.

Where plumbers add value

Legionella-related services plumbing firms can offer landlords, matched to HSE's control measures.
ServiceWhat it involvesWhen landlords need it
Risk assessment supportA walk-through of the system with written observations, or a full simple assessment if orderedBefore first letting, after changes, or when the landlord is not confident
Temperature checksMeasuring cylinder, outlet and cold water temperatures and recording themAt each annual visit and after any system change
Removing dead legsTaking out redundant pipework where water can stagnateWhen found during any visit
Cistern fixesFitting tight lids and screened vents to cold water storage tanksWhen tanks are open or damaged
FlushingFlushing the system before a new tenancy or after a voidBetween tenancies and after long vacancies
Simplifying systemsReplacing stored cold water with mains-fed supplies where suitableDuring refits or boiler changes

HSE's own list of control measures includes flushing the system before letting, removing redundant pipework, ensuring cold water tanks have a tight-fitting lid, and setting the cylinder to store water at 60°C[1]. Each of those is plumbing work, which makes legionella a natural part of a landlord maintenance service.

A low-risk system, by HSE's description, is one with daily water use, mains-fed cold water and no stored tanks, and hot water from instantaneous or low-volume heaters supplying outlets at 50°C[1]. Many combination boiler flats already fit that description. When you replace a tank-fed system with a mains-fed one, you are reducing the landlord's legionella risk as well as improving pressure, and it is worth saying so on the quote.

Combining it with the gas safety visit

Landlords must already have a registered engineer carry out an annual gas safety check on each appliance and flue[4]. HSE notes that where access is difficult, legionella checks can be made during other visits such as gas safety checks[1]. One visit, two duties, one report is a simple offer.

  1. Check the cylinder or boiler settings

    Record stored hot water temperature where there is a cylinder, and confirm the thermostat setting has not been turned down.

  2. Run the outlets

    Time how long hot outlets take to reach 50°C and measure cold water temperature at the kitchen tap.

  3. Look for stagnation

    Note rarely used outlets, dead legs, and any cold water tank without a proper lid.

  4. Check showers

    Look at showerheads and hoses for scale build-up, and remind tenants to clean them regularly.

  5. Write it up

    Add a short water hygiene section to the gas report: readings, observations and recommendations.

Scotland is stricter on timing

In Scotland, the repairing standard guidance says private landlords have a duty to assess hot and cold water systems for legionella risk before the property is first let, and to review the assessment at intervals of no more than two years[3]. It also expects the hot water tank to be kept at no less than 60°C[3]. If you work for landlords on both sides of the border, keep separate review reminders. See our guide to Scotland's landlord safety rules.

Vacant homes and voids

Empty properties are the highest legionella risk in a landlord's portfolio, because water stands still. HSE advises that outlets in vacant properties should be used at least once a week, and that a flushing regime or draining may be needed for longer vacancies[1]. Agents often forget this between tenancies.

Offer a void flush as a standard service: run every outlet, including showers and outside taps, for long enough to replace the water in the pipework, record temperatures, and leave a note for the agent. For landlords with several properties, a standing instruction works better than ad hoc requests: every time a home falls empty for more than a week, the agent books a void flush, and every time a new tenancy starts, the flush date goes on the move-in pack. That turns a forgotten task into a routine one. Private rented homes are already more likely to have problems; 22% failed the Decent Homes Standard in 2024, the highest of any tenure[5].

Example: a one-bedroom flat between tenancies

Example: an agent asks for a legionella certificate for a flat in Manchester that has been empty for six weeks. The plumber explains that no certificate is legally required, and offers instead a void flush, a temperature check and written observations to support the landlord's own risk assessment. The flat has a combination boiler and no stored water, so the risk is low.

On site the plumber runs each outlet, finds hot water reaching 50°C in under a minute, cold water at the kitchen tap well below 20°C, and a redundant branch to a removed washing machine. The branch is cut back and capped at the tee. The report lists the readings, the dead leg removed and a reminder to clean the showerhead. The agent files it with the gas record and lets the flat the following week.

Words to avoid

Do not sell a legionella certificate or describe your report as one. Call it what it is: water hygiene observations or a simple legionella risk assessment, with readings, findings and recommendations.

Frequently asked questions

Do landlords need a legionella certificate?

No. HSE says health and safety law does not require landlords to obtain or produce a legionella test certificate. They must assess and control the risk.

Can a landlord do their own legionella risk assessment?

Yes. HSE says most landlords can assess the risk themselves and do not need to be professionally trained or accredited, or they can ask someone competent to do it.

How often should a landlord's legionella assessment be reviewed?

In England and Wales the law does not set a fixed interval; it should be reviewed when anything changes. In Scotland the guidance says no more than two years.

Is water testing needed for a rented flat?

HSE says testing is not usually required for domestic hot and cold water systems. Temperature monitoring is the reliable check.

References

  1. Health and Safety Executive (2026). Legionella and landlords' responsibilities (opens in a new tab) ↑

  2. Health and Safety Executive (2026). Legionella: things to consider for hot and cold water systems (opens in a new tab) ↑

  3. Scottish Government (2024). Repairing Standard: statutory guidance for private landlords, Annex D1: Water (opens in a new tab) ↑

  4. GOV.UK (2026). Your landlord's safety responsibilities (opens in a new tab) ↑

  5. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo