Regulation compliance

Planning ACS reassessments across your engineers

Plan ACS gas reassessments across a team: the five-year cycle, the six-month window, a competence matrix, winter timing and the cost of lapsed categories.

Ava research teamPublished 7 min read

On this page
  1. Why lapses happen in good firms
  2. The cycle in brief
  3. Employers carry the risk
  4. Build a competence matrix
  5. Subcontractors and self-employed engineers
  6. Timing rules that work
  7. What a reassessment costs in time
  8. The real cost of a lapse
  9. Adding categories as the work changes
  10. An annual planning cycle
  11. Worked example
  12. Frequently asked questions
  13. References

Key takeaways

  • ACS certificates are normally valid for five years, and reassessment can be taken up to six months before expiry without losing time.
  • An engineer whose category has expired cannot do that work, so a missed date can take a van off the road for that type of job.
  • Employers must make sure staff are competent for the work they do, which means checking categories before allocating jobs.
  • Keep a single competence matrix with every engineer, category and expiry date, and book reassessments in the window, away from the winter peak.
  • Spread reassessments across the team and across the year, so you never lose several engineers' categories at once.

Why lapses happen in good firms

Most ACS lapses are not the result of carelessness about safety. They happen because certificates for different categories and different engineers expire on different dates, the reminder goes to an engineer's personal email, and the expiry falls in December when nobody wants to take a day off the tools. One missed date can mean an engineer cannot legally do boiler work for a fortnight in the busiest month of the year.

Planning reassessments as a business, rather than leaving each engineer to manage their own, removes almost all of that risk. It takes a spreadsheet, a calendar and one person responsible.

The cycle in brief

ACS certificates are normally valid for five years, and BPEC, one of the certification bodies, says reassessment can be taken up to six months before the expiry date of the existing qualification, so candidates can reassess early without losing time[1]. Assessments are structured with a core assessment, such as CCN1 or COCN1, alongside appliance assessments such as CENWAT, and on successful completion the certification body uploads the results to Gas Safe Register[1].

Behind this sits the law. HSE's code of practice explains that certification schemes require individual gas engineers to have their competence assessed at regular intervals[2]. The engineer's categories are what customers, landlords and inspectors check, and HSE notes that the categories are clearly marked on the back of the engineer's registration card[3].

Employers carry the risk

An employer must make sure employees have the competence required for the work they undertake, are properly experienced and trained, and must monitor performance standards on an ongoing basis[2]. If you send an engineer to a cooker installation after their cooker category has lapsed, the problem is yours as well as theirs.

  • Check categories at the point of booking, not just once a year in the office.
  • Block job types in your scheduling software for any engineer whose category has expired.
  • Keep copies of every certificate on file, with expiry dates in one place.
  • Do not rely on engineers' memories or on reminders sent only to them.

Build a competence matrix

A competence matrix is a single table showing every engineer, every category they hold and when each expires. It can be a spreadsheet or part of your job management system. What matters is that it is current, shared and checked monthly.

Example competence matrix for a fictional four-engineer firm (dates are illustrative)
EngineerCoreBoilers and water heatersCookersFiresNext action
Engineer AJun 2028Jun 2028Jun 2028Not heldNone this year
Engineer BMar 2027Mar 2027Not heldMar 2027In window since Sep 2026; book for early 2027
Engineer CJan 2027Jan 2027Jan 2027Jan 2027Reassess now, in window
Engineer D (apprentice completing)PendingPendingNot heldNot heldInitial assessment booked

Colour-code the next 12 months: red for anything expiring within three months, amber within six, green beyond. Review it at the same meeting every month.

Subcontractors and self-employed engineers

If you use self-employed gas engineers or subcontract gas work to another business, their categories matter to you too. HSE's code of practice says the duty to ensure gas engineers are competent extends to other employers and self-employed people with control over the work, such as certain contractors, and that where more than one dutyholder is involved, close liaison and proper check procedures are essential[2].

  • Ask every subcontractor for their business registration number and the categories of each engineer who will attend, and check them on the register before the first job.
  • Add subcontractors to your competence matrix with their expiry dates, and ask for new certificates when they reassess.
  • Match each subcontracted job to a category they hold, exactly as you would for your own staff.
  • Keep the checks on file with the job, so you can show what you verified and when.

Self-employed engineers working on their own account should run the same matrix for themselves. It takes ten minutes a year and avoids the most avoidable way to lose a fortnight's work.

Timing rules that work

  • Book inside the six-month window, as early as is practical, so a failed module can be retaken before expiry.
  • Avoid the winter peak. Plan reassessments for late spring and summer where the window allows, when breakdown calls are lowest.
  • Never let two engineers with the same scarce category be away at the same time.
  • Align an engineer's appliance categories with their core where you can, so all their dates move together in future.
  • Book the training centre slot first, then block the diary, then tell customers.
  • Add a buffer day for study or practice time for engineers who have not sat an assessment for five years.

What a reassessment costs in time

The fee is only part of the cost. The bigger part is the engineer's time off the tools. Median gross hourly pay for employee plumbers and heating and ventilating installers was £18.82 in 2026, against £19.00 for all employees[4], and the lost charge-out value of a day is much higher than the wage.

Median gross hourly pay, 2026 (provisional)Annual Survey of Hours and Earnings
Median gross hourly pay, 2026 (provisional)Comparison. Employee plumbers and heating and ventilating installers: £18.82; All UK employees: £19.£18.82Employee plumbers and heating andventilating installersEmployee plumbers and heating and ventilating installers: £18.82£19All UK employeesAll UK employees: £19Median gross hourly pay, 2026 (provisional)Comparison. Employee plumbers and heating and ventilating installers: £18.82; All UK employees: £19.£18.82Employee plumbers and heating andventilating installersEmployee plumbers and heating and ventilating installers: £18.82£19All UK employeesAll UK employees: £19

Source: Office for National Statistics, 2026[4]

Show the data
ItemValue
Employee plumbers and heating and ventilating installers£18.82
All UK employees£19

Example: a fictional firm estimates that an engineer away for two days of reassessment costs about £300 in wages and £900 in lost billable work at its charge-out rate, plus the assessment fee. Over five years for four engineers that is a predictable cost to budget, much smaller than the cost of an engineer unable to work on boilers for two weeks in January.

The real cost of a lapse

When a category lapses, the engineer cannot do that work until they are reassessed and their record is updated. Jobs have to be moved, customers rebooked and landlord renewals rescheduled, sometimes past their deadline. Replacing capacity at short notice is hard: 45% of construction SME employers saw staff recruitment and skills as an obstacle to business success in 2025[5].

  • Jobs already booked in that category must be reassigned or postponed.
  • Marketing that names the engineer or the service may need a temporary change.
  • Landlord and agent clients who rely on you for renewals must be told if dates slip.
  • Gas Safe records and the engineer's card must reflect the current position before they resume that work.

Adding categories as the work changes

Reassessment planning is also the right moment to decide which categories to add or drop. Low-carbon heating is one area where engineers are adding skills: just under 10,000 people completed a recognised heat pump training qualification in 2024, 15% more than in 2023[6]. If you are moving into heat pumps or hybrid systems, plan that training alongside the gas reassessment calendar so engineers are not away twice in the same season.

Equally, if nobody has fitted a gas fire for three years, consider whether the category is worth keeping for every engineer, or for one.

An annual planning cycle

  1. January: refresh the matrix

    Check every certificate against the register and update expiry dates.

  2. February: book the year

    Book reassessments for everyone whose window opens in the next 12 months, preferring April to September.

  3. Monthly: review

    Check the red and amber entries and confirm bookings, results and updated cards.

  4. After each reassessment

    Confirm results have reached the register, file the new certificates and update scheduling software.

  5. Autumn: plan new categories

    Decide training for the next year based on the work you want to win.

Worked example

Example: a fictional five-engineer firm finds that three engineers' core and boiler categories all expire in the same January, because they qualified together. It reassesses one in the previous June, one in September and one in early October, all within their windows, and keeps two engineers on the tools throughout. Next cycle, their dates are staggered by months instead of days.

For how qualifications are checked during an inspection, see preparing for a Gas Safe inspection. For the standards engineers must apply on returning to work, see the IGEM/UP/1B Edition 4 update, and for training routes, see managed learning for gas ACS.

Frequently asked questions

How long is an ACS certificate valid?

ACS certificates are normally valid for five years. Check the expiry date on each certificate, because different categories can expire on different dates.

How early can an engineer take an ACS reassessment?

BPEC says reassessment can be taken up to six months before the expiry date of the existing qualification, so engineers can reassess early without losing time.

Can an engineer keep working if a category has expired?

Not on that category of work. They need to be reassessed and their record updated before doing it again. Other categories that are still current are not affected.

Who is responsible for tracking ACS dates, the engineer or the employer?

Both have a part to play, but employers must make sure their employees are competent for the work they do. A single competence matrix managed by the business is the safest approach.

References

  1. BPEC (2026). ACS: Domestic, Non-Domestic, LPG, ESP (opens in a new tab) ↑

  2. Health and Safety Executive (2018). Safety in the installation and use of gas systems and appliances (L56, fifth edition), paragraphs 84 to 90 (opens in a new tab) ↑

  3. Health and Safety Executive (2026). Gas safety checks: who can do it? (opens in a new tab) ↑

  4. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  5. Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

  6. Heating and Hotwater Industry Council (HHIC) (2024). Bumper year for UK heat pumps (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo