Landlord commercial work

Working for housing associations as a heating contractor

How housing association repair work is bought and measured: frameworks, schedules of rates, Awaab's Law timescales, KPIs and payment terms.

Ava research teamPublished 7 min read

On this page
  1. How housing associations buy repair and heating work
  2. The work streams and what each one asks of you
  3. Awaab's Law and the clock it puts on your jobs
  4. The KPIs you will be held to
  5. Why social housing stock behaves differently
  6. Schedules of rates, payment terms and cash flow
  7. Getting onto an approved list or framework
  8. Is social housing work right for your firm?
  9. Frequently asked questions
  10. References

Key takeaways

  • Housing associations buy repairs through frameworks, approved lists and main contractors, so the route in decides your margin and your paperwork.
  • Awaab's Law puts a 24-hour clock on emergency hazards such as broken boilers and significant leaks, and landlords pass that clock to contractors[1][2].
  • Expect to be measured monthly on appointments kept, first-time fix, completion within target and gas servicing compliance.
  • Schedules of rates reward firms that know their own job times; price from your data, not from hope.
  • Late payment is the top obstacle for construction SMEs, so agree valuation dates and use the statutory interest right when invoices drift[3][4].

How housing associations buy repair and heating work

A housing association rarely books a heating engineer the way a homeowner does. Work is bought in bundles, through routes that each come with their own rules. Knowing which route you are on tells you who sets the price, who sends the jobs and who pays you.

  • Frameworks: a panel of approved contractors appointed after a tender, often for four years. Call-off contracts are awarded from the panel by direct award or mini-competition.
  • Approved contractor lists: smaller associations keep a list of vetted firms and share responsive work between them. Entry is usually by questionnaire rather than full tender.
  • Main contractor supply chains: large repairs and maintenance contractors hold the landlord contract and subcontract heating, voids or gas servicing to specialists like you.
  • Direct term contracts: a single contract for one stream, such as gas servicing across a patch of homes, usually won through a public tender.

Most small firms start as a subcontractor in a main contractor's chain or on an approved list, then bid directly once they have references and a clean compliance record. If you are new to public procurement, read our guide to finding public sector plumbing tenders before you commit time to a framework bid.

The work streams and what each one asks of you

Housing association heating work splits into streams that behave very differently. Responsive repairs bring volume and out-of-hours pressure. Planned programmes bring steady, scheduled work with tighter margins. Gas servicing is non-negotiable compliance: landlords must have every gas appliance and flue checked at intervals of not more than 12 months[5], so a missed visit is a breach for the landlord, not just a late job.

Housing association heating work streams compared
Work streamTypical triggerWhat the landlord measuresWhat it means for you
Responsive repairsTenant reports a fault to the repairs lineResponse and completion against priority targetsEngineers on call, vans stocked for common faults, fast job updates
Void worksTenant moves out; home must be re-letDays from keys to ready-to-letCapping, testing, re-commissioning and certificates on a tight turnaround
Gas servicingAnnual safety check due dateHomes with a valid certificate on the dayAppointment booking, no-access process and certificate upload
Planned replacementBoiler or system at end of life in the asset planProgramme delivery and tenant satisfactionSurvey, install and handover to an agreed weekly rate
Damp and leak investigationReport that may be a hazardInvestigation and safety work within legal timescalesWritten findings, photos and clear next steps the same day

Void works deserve a special mention because they are where small firms often win their first social housing contract. Our guide to void property works covers the capping, testing and certification sequence in detail.

Awaab's Law and the clock it puts on your jobs

Since 27 October 2025, social landlords in England must investigate emergency hazards and carry out safety work within 24 hours of becoming aware of them[1]. The government's guidance lists broken boilers, gas or carbon monoxide leaks, total loss of water supply and significant leaks among the examples of emergency hazards[2]. For potential significant hazards, landlords have 10 working days to investigate and 5 working days after the investigation to complete safety work[6].

24 hours

to investigate and make safe an emergency hazard under Awaab's Law[1]

The landlord carries the legal duty, but the timescale lands on whoever holds the job. Expect contracts to include Awaab's Law priorities with tighter internal targets than the law, so the landlord has time to check your evidence. Expect to be asked for written findings, timestamped photographs and a statement of what you made safe and what still needs doing. For the full picture of the regime, see Awaab's Law and leak repair timescales.

Make-safe is not the same as fixed. Record both: the time the hazard was made safe, and the plan and date for the permanent repair. Landlords are judged on each.

The KPIs you will be held to

Every framework and term contract comes with a KPI schedule, reported monthly. The headings are fairly standard across associations, even if the targets vary. Ask for the schedule before you price, because KPIs that link to deductions change the real value of the contract.

  1. Appointments made and kept: did you arrive within the slot you agreed with the tenant?
  2. Completion within target: was the job closed inside the time allowed for its priority?
  3. First-time fix: was the repair finished on the first visit without a follow-on order?
  4. Gas servicing compliance: does every home have a valid certificate today?
  5. Tenant satisfaction: short surveys after completion, often by text.
  6. Recalls: repeat visits for the same fault within a set period.
  7. Data quality: job notes, photographs and certificates uploaded on time.

Example: a four-engineer firm on an approved list receives 60 responsive heating jobs in its first month. It keeps 55 appointments, fixes 48 first time and completes 57 within target. The association's report shows those figures alongside other contractors on the list, and the firm with the best mix tends to receive more of next quarter's work. Nothing in that sum depends on luck: it depends on van stock, booking discipline and how quickly engineers close jobs on the system.

Why social housing stock behaves differently

The English Housing Survey found 22% of private rented homes failed the Decent Homes Standard, against 10% in the social rented sector[7]. Social landlords tend to run planned programmes and asset databases, which means more scheduled replacement work and fewer chaotic one-off jobs than private lettings. It also means they know the age and model of most boilers on their stock, and will expect you to carry the right parts.

Homes failing the Decent Homes Standard, England 2024
Homes failing the Decent Homes Standard, England 2024Comparison. Private rented: 22%; Social rented: 10%.22%Private rentedPrivate rented: 22%10%Social rentedSocial rented: 10%Homes failing the Decent Homes Standard, England 2024Comparison. Private rented: 22%; Social rented: 10%.22%Private rentedPrivate rented: 22%10%Social rentedSocial rented: 10%

Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2024[7]

Show the data
ItemValue
Private rented22%
Social rented10%

If you also work for private landlords, the contrast is useful when you price. Private lettings throw up more surprises per visit; social housing throws up more paperwork per visit. Our guide to HMO plumbing and heating work covers the private side.

Schedules of rates, payment terms and cash flow

Most responsive and void work is priced from a schedule of rates: each job code carries a fixed price, sometimes adjusted by a percentage you bid. The schedule is fair only if your engineers complete the coded tasks in close to the time the price assumes. Before you bid, pull three months of your own job times for the common codes, such as boiler fault diagnosis, radiator valve replacement and leak trace, and compare them with the schedule.

Cash flow is the other risk. 45% of construction SME employers named late payment as a major obstacle in 2025, up from 36% the year before and the highest of any sector[3]. On a monthly valuation cycle, a firm can be funding labour and parts for six to eight weeks before cash arrives. Agree the valuation date, the invoice format and the payment period in writing, and remember that businesses can charge statutory interest of 8% plus the Bank of England base rate on late business-to-business payments[4]. For pricing approaches, see pricing commercial plumbing work.

Getting onto an approved list or framework

  1. Choose two or three landlords

    Pick associations whose stock is within a reasonable drive of your base. Read their annual reports and repairs policies to see how they buy work and who their main contractors are.

  2. Get your compliance file in order

    Gas Safe registration for every engineer, insurance certificates, a health and safety policy, method statements, a safeguarding statement and DBS evidence where tenants may be vulnerable.

  3. Introduce yourself to the main contractors

    Ask the repairs contractors which trades they are short of and how they onboard subcontractors. Heating and void specialists are often in demand.

  4. Win and document small jobs

    Deliver a handful of jobs with perfect paperwork. Ask the contract manager for a written reference you can use in a future tender.

  5. Watch for tenders and bid selectively

    Bid only for lots you can cover without hiring in a panic. A smaller lot delivered well beats a large one that damages your record.

Is social housing work right for your firm?

  • Yes, if you want steady volume, can run an on-call rota and have someone who enjoys systems and paperwork.
  • Yes, if your engineers are strong on fault-finding across common boiler models rather than only installs.
  • Think twice if more than half your income would come from one landlord, or if a six-week payment cycle would strain your overdraft.
  • Think twice if your job management is still paper-based; the reporting load will bury you.

Social housing work is not glamorous, but it is predictable once you are set up for it. The firms that do well treat the contract as a service with measured outcomes, not as a stream of individual jobs.

Frequently asked questions

Do I need to tender to work for a housing association?

Not always. Many small firms start as subcontractors to the association's main repairs contractor or on an approved list entered by questionnaire. Direct framework places usually need a formal tender.

Does Awaab's Law apply to contractors?

The legal duty sits with the social landlord, but landlords pass the timescales into contracts. In practice you will be asked to attend, make safe and report emergency hazards inside the landlord's 24-hour window.

What is a schedule of rates?

A price list where each common repair has a code and a fixed price. You may bid a percentage up or down on the schedule. It works for you only if your job times match the times the prices assume.

How long do housing associations take to pay?

It depends on the contract. Agree the valuation date, invoice format and payment period before you start, and chase promptly. Statutory interest is available on late business-to-business payments.

References

  1. Ministry of Housing, Communities and Local Government (GOV.UK) (2025). Awaab's Law: Guidance for social landlords - Timeframes for repairs in the social rented sector (opens in a new tab) ↑

  2. Ministry of Housing, Communities and Local Government (GOV.UK) (2026). Awaab's Law: Guidance for social landlords - Timeframes for repairs in the social rented sector (opens in a new tab) ↑

  3. Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

  4. GOV.UK (2026). Late commercial payments: charging interest (opens in a new tab) ↑

  5. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  6. Ministry of Housing, Communities and Local Government (GOV.UK) (2026). Awaab's Law: Guidance for social landlords - Timeframes for repairs in the social rented sector (opens in a new tab) ↑

  7. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo