Key takeaways
- A large HMO needs a licence when it is rented to five or more people forming more than one household, and the landlord must send the council an updated gas safety certificate each year[1].
- In England, HMOs must have adequate bathrooms, toilets and basins with constant hot water, heated and ventilated bathrooms and adequate space heating in each unit[2].
- Hot water is the usual weak point: design for the morning peak, not the average day, and keep storage at 60°C[3].
- Damp is rising across English homes, from 4% of dwellings in 2021 to 5% in 2024[4]; busy shared bathrooms and kitchens make ventilation and leak repairs a priority.
- Access is harder with several tenants, so agree a notice and key procedure with the landlord or agent before the first job.
Why HMOs are different
A house in multiple occupation puts more people, more appliances and more simultaneous demand through a system designed, often decades ago, for one family. Five students all want a shower between seven and eight in the morning. Several cooks use the kitchen at once. Bathrooms are used constantly and dry out rarely. Pipework, valves, taps and boilers wear faster, and small faults affect several people at once.
HMOs also come with licensing. A large HMO needs a licence when it is rented to five or more people who form more than one household and share toilet, bathroom or kitchen facilities[1]. A licence lasts a maximum of five years, and the landlord must send the council an updated gas safety certificate each year, install and maintain smoke alarms and make sure the house is suitable for the number of occupants[1]. Councils can add their own conditions, so check the local licence before you design anything.
The amenity standards that touch your work
In England, the HMO regulations set out amenity standards that a heating and plumbing firm should know[2]:
- An adequate number of bathrooms, toilets and wash-hand basins for the number of people sharing them.
- Where reasonably practicable, a wash-hand basin with a splashback in each unit of accommodation.
- Baths, showers and basins with taps providing an adequate supply of cold and constant hot water.
- All bathrooms suitably and adequately heated and ventilated.
- All baths, toilets and basins fit for purpose.
- Each unit of living accommodation equipped with adequate means of space heating.
Adequate is not defined as a number in the regulations, and many councils publish their own amenity guidance with ratios of bathrooms and toilets to occupants. Ask the landlord for the council's guidance or the licence conditions before you quote for a conversion or an upgrade.
Designing hot water for shared houses
The commonest HMO complaint a plumber hears is running out of hot water. The cause is nearly always design for average use when the problem is the peak. Work out how many showers or baths happen in the busiest hour and size for that, then add a margin for guests and long showers.
| Option | Strengths | Watch out for |
|---|---|---|
| Large unvented cylinder with a system boiler | Good flow to several outlets at once; stored capacity covers peaks | Space, recovery time and unvented competence |
| Two cylinders or a twin-coil arrangement | More stored capacity, some resilience if one fails | Balancing and controls |
| Electric showers in each bathroom | Independent of the stored hot water; simple | Electrical supply capacity and running costs on bills-inclusive lets |
| Combi boiler alone | Compact and cheap | Rarely copes with more than one outlet at a time in a large HMO |
| Heat pump with a large store | Low-carbon, steady output | Store size, recovery and a regular high-temperature cycle |
Whatever you choose, keep storage at 60°C or above and make sure water reaches 50°C at the outlets within one minute, as HSE guidance sets out[3]. Long pipe runs to top-floor bathrooms are a common reason for slow hot water; consider the layout as well as the volume.
Heating: comfort, control and cost
Each unit must have adequate space heating[2], but who controls it is often a source of conflict. In bills-inclusive HMOs, landlords want to limit costs; tenants want warm rooms. Design and controls can reduce the friction:
- Size radiators for each room's heat loss, not by habit. Rooms in converted lofts and extensions are often undersized.
- Fit thermostatic radiator valves with limited ranges in tenant rooms, so rooms stay warm without being set to maximum all day.
- Use a central programmer or smart controls the landlord can manage, with a sensible schedule agreed with the tenants.
- Heat bathrooms properly, with a radiator or towel rail on the heating circuit or a suitable electric alternative.
- Explain the controls in writing in the kitchen or hallway, so new tenants understand them.
Damp, ventilation and leaks
Shared bathrooms and kitchens produce a lot of moisture. Across England, 5% of dwellings, about 1.4 million, had a damp problem in 2024, up from 4% in 2021 and 2022[4]. In HMOs, a slow leak under a shower tray or a failed extractor fan can cause damage quickly, and several tenants may report it in different ways.
Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2024[4]
Show the data
| Item | Value |
|---|---|
| 2021 | 4% |
| 2022 | 4% |
| 2024 | 5% |
Bathrooms must be adequately ventilated as well as heated[2]. On every visit, check extractor fans work and actually extract, look for leaks around trays, baths and waste pipes, and report signs of mould to the landlord in writing with photographs.
Gas safety in HMOs
The usual gas safety duties apply: each appliance and flue checked at least every 12 months[5], and for licensed HMOs the landlord sends the updated certificate to the council each year[1]. HMOs often have more appliances than a family home, such as a boiler, a hob in a shared kitchen and sometimes appliances in individual units. List every one on the record. Check carbon monoxide alarms in every room with a fixed combustion appliance, and report missing alarms immediately.
Drains, waste and wear
Heavy use shows up in the drains as much as the heating. Shared kitchens send more grease down the sink, several people’s hair collects in shower wastes, and toilets get used far more than in a family home. Blocked wastes and slow drains are among the most frequent HMO call-outs, and many are preventable.
- Fit good-quality, accessible traps and wastes that can be cleared without removing panels.
- Recommend hair catchers on showers and a strainer on the kitchen sink, and tell the landlord why.
- Check toilet cisterns and fill valves on every visit; a running cistern in a bills-inclusive HMO wastes water for months.
- Choose robust taps, valves and shower controls rated for heavy use rather than the cheapest option.
- Note recurring blockages by room or appliance so the landlord can address tenant habits or replace a poor installation.
A short set of house notes for tenants on what not to put down sinks and toilets saves the landlord money and you a good number of unglamorous call-outs.
Quoting HMO work
Price HMO jobs with the extra time in mind: more appliances to check, more tenants to coordinate, more rooms to access and often tighter windows to keep hot water and heating running. Ask for the licence conditions and any council amenity guidance before quoting a conversion or upgrade, so the design meets them first time. Where a job affects several tenants, give the landlord a clear plan for how long services will be off and when, so they can warn tenants in advance.
Managing access with several tenants
Agree the procedure
Settle with the landlord or agent how much notice tenants get, who sends it and how keys are handled.
Notify everyone affected
A repair in a shared bathroom or to the boiler affects every tenant. Make sure they all know when you are coming and for how long.
Plan around the peak
Avoid shutting off hot water or heating at the morning or evening peak when you can.
Be visible and identifiable
Carry identification and introduce yourself to any tenant you meet; several strangers share the house.
Report to one contact
Give your findings to the landlord or agent, and a short note to tenants on what was done and what happens next.
Respect tenants' rooms. If you need to enter one to reach a radiator or pipe, make sure the tenant has been told and, ideally, is present or has agreed.
Worked Example: a six-bedroom HMO that ran out of hot water
Example (fictional): a six-bedroom student HMO with two bathrooms has a combi boiler and constant complaints about cold showers in the morning. The landlord asks for a bigger combi.
In the Example, the plumber explains that a larger combi will still struggle with two showers at once. He proposes a system boiler with a 250-litre unvented cylinder, a thermostatic mixing valve and a timed high-temperature cycle, and replaces a failed bathroom extractor while on site. The landlord books it for the summer, between tenancies. For changeover work, see void property works; for regular checks, see landlord compliance bundles.
Frequently asked questions
When does an HMO need a licence?
A large HMO needs a licence when it is rented to five or more people who form more than one household and share toilet, bathroom or kitchen facilities[1]. Councils may license smaller HMOs too.
What hot water must an HMO provide?
In England, baths, showers and basins must have taps providing an adequate supply of cold and constant hot water[2].
How should I size hot water in an HMO?
For the busiest hour, not the average day: count how many showers or baths happen together and size the store and recovery for that, with storage at 60°C[3].
Do HMO landlords send gas safety certificates to the council?
For licensed HMOs, yes: the landlord must send the council an updated gas safety certificate each year[1].
References
GOV.UK (2026). House in multiple occupation licence (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2006). The Licensing and Management of Houses in Multiple Occupation and Other Houses (Miscellaneous Provisions) (England) Regulations 2006, Schedule 3 (opens in a new tab) ↑
Health and Safety Executive (2026). Legionnaires’ disease: hot and cold water systems (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑