Key takeaways
- Public liability insurance is generally voluntary, unlike employers' liability, which is compulsory once you employ staff[1].
- In practice your clients set the limit: letting agents, contractors, councils and trade schemes often state a minimum in their terms.
- The usual traps for plumbers are heat-work conditions, faulty workmanship exclusions and gaps in cover for completed work.
- Size the limit to your worst realistic incident, such as an escape of water through a block of flats, not to the cheapest quote.
What public liability actually covers
Public liability insurance pays claims made against you by members of the public or other businesses for injury or damage caused by your work. For a plumber that usually means a customer's ceiling brought down by a failed joint, a neighbour's flat flooded through the floor, or someone tripping over tools in a hallway. The policy normally pays compensation and the legal costs of defending the claim.
It does not cover claims from your own employees, which is the job of employers' liability insurance[1]. Nor does it usually pay to redo your own faulty work, replace stolen tools, or cover advice and design, which sits under professional indemnity cover.
A simple test: public liability pays for the damage your work causes to other people and their property. It rarely pays for the work itself.
Is it a legal requirement?
No. The Health and Safety Executive's guide puts it plainly: public liability insurance is generally voluntary, while employers' liability insurance is compulsory[1]. That matters because most plumbing firms are tiny. About 95% of registered plumbing, heating and air-conditioning enterprises have fewer than 10 employees[2], and across the whole UK economy 74% of private businesses have no employees besides the owners[3].
- 0 to 9 employees 45,370 enterprises 95%
- 10 or more employees 2,540 enterprises 5%
Source: Office for National Statistics (Nomis), 2026[2]
Show the data
| Item | Value |
|---|---|
| 0 to 9 employees | 45,370 enterprises |
| 10 or more employees | 2,540 enterprises |
Voluntary in law does not mean optional in business. Your liability to a customer exists whether you are insured or not. Every service contract includes a duty to work with reasonable care and skill[4], and if a careless repair floods a house, the claim lands on you personally as a sole trader or on your company's assets.
- Letting agents and landlords usually ask for a certificate before they add you to their contractor list.
- Main contractors and housing associations set minimum limits in their subcontract terms.
- Competent person schemes and trade associations commonly expect members to hold cover.
- Commercial clients, schools and hospitals often ask for higher limits than domestic work.
How much cover is enough?
Start with the highest limit any client contract demands, then ask whether your own worst realistic incident could cost more. Water and fire drive the big claims in this trade. In England, 5% of homes, or 1.4 million dwellings, already had a damp problem in 2024[5], and escape of water damage spreads quickly through older buildings and flats.
| Type of work | Main risk | What pushes the limit up |
|---|---|---|
| Domestic repairs in houses | Water damage to one property | Listed or high-value homes, expensive fittings below |
| Bathroom and kitchen refits | Water damage, damage to finishes | Work across several floors, long programmes |
| Flats and blocks | Escape of water to other flats | Several households affected by one failure |
| Soldering and brazing on site | Fire | Timber floors, roof voids, thatched or older buildings |
| Commercial and public buildings | Business interruption, injury to the public | Contract minimums, members of the public on site |
| Heat pump and boiler installs | Damage when moving heavy kit, completed works faults | Craning, scaffold, external units near boundaries |
If one firm does all six, cover the biggest exposure, not the most common one. The difference in limit is usually far smaller than the difference in what an uninsured claim would cost.
The exclusions that catch plumbers
- Heat-work conditions. Many policies require a fire extinguisher at hand, a clear area, a fire watch after brazing and a check before leaving. Break the condition and the insurer may refuse a fire claim.
- Faulty workmanship. Policies typically pay for the damage your mistake caused, not for putting the mistake itself right.
- Completed works. A joint that fails three weeks after you leave is a products and completed works claim. Check it is included and how long it lasts.
- Gradual damage. Slow seepage over months may be treated differently from a sudden escape.
- Underground services. Damage to cables or pipes when digging may be excluded unless you checked plans first.
- Contractual liability. Terms that make you accept more liability than the law would impose may not be covered.
- Subcontractors. If you use labour-only help, check whether their work is covered by your policy or theirs.
Questions to ask your broker or insurer
Comparison sites are fine for a starting price, but the wording matters more than the premium. Put these questions in writing and keep the answers with your policy documents.
- Is the limit per claim or for the whole year, and does it include legal costs or sit on top of them?
- What heat-work conditions apply, word for word, and do they cover soldering, brazing and hot air tools?
- Is products and completed works cover included, at what limit, and for how long after a job?
- Are gas work, unvented cylinders, heat pumps and commercial work all declared and covered?
- Is there an excess on property damage claims, and does it rise for water damage?
- Are labour-only helpers and subcontractors covered under my policy, or must they hold their own?
- Does the policy cover work in Scotland or Northern Ireland, or only England and Wales?
- Can you issue certificates naming specific clients, such as a letting agency or main contractor?
If the answer to any question is unclear, ask for the policy wording rather than a summary. The schedule and the full wording, not the sales page, decide whether a claim is paid.
Check your policy fits in six steps
List the work you actually do
Include occasional jobs such as unvented cylinders, gas work, heat pumps, commercial callouts and anything at height. Undeclared trades are a common reason claims fail.
Collect your clients' minimum limits
Pull the insurance clause from every agent, contractor and framework you work for. The highest figure is your floor.
Read the heat-work and water conditions
Turn each condition into a line on your job sheet so engineers tick it off on site.
Confirm completed works cover
Ask how long after the job a claim can be made and whether the same limit applies.
Check how employees and helpers are treated
Public liability does not replace employers' liability insurance for anyone you employ.
Diary the renewal
Send updated certificates to agents and contractors before the old one expires, or you may be taken off their list.
Landlord and agent work
Letting agents and landlords are some of the most insurance-conscious clients a plumber will have. They need to show their own insurers and tenants that contractors are covered, so they ask for a current certificate, sometimes with the agency named, and many will not issue a job until it is on file.
Rented homes also carry more risk than average. Water leaks into flats below, tenants who are out when you arrive, and keys collected from an office all make it harder to show what condition a property was in before you started. Take photos on arrival, note who let you in, and record the state of anything you move. If the tenant is present, a quick text confirming what you found and what you did gives both of you a record.
Example: the joint that failed in a top-floor flat
Example. A sole trader replaces a basin tap in a top-floor flat. A compression joint under the basin is not fully tightened and lets go overnight. Water runs through two floors before the flat below notices. The building's insurer pays the residents and then pursues the plumber for the cost.
The plumber's public liability insurer handles the claim, pays for the damage to both flats below and the cost of drying them out, and defends the amount claimed. It does not pay for the plumber's return visit to remake the joint, which he does at his own cost. Because he called his insurer the morning it happened, did not admit liability on the doorstep and kept photos and his job sheet, the claim is settled without a dispute over cover.
When something goes wrong
Tell your insurer as soon as you know about an incident that could lead to a claim, even if nobody has complained yet. Do not admit liability or offer to pay for damage until the insurer agrees, because that can prejudice your cover. Photograph everything, keep the failed part and write up what happened while it is fresh. Our guide to escape of water insurance claims covers the report insurers need.
Complaints about the work itself, as opposed to damage it caused, usually stay between you and the customer. Most end with a return visit, and some go to alternative dispute resolution. Customer problems in home repair are common enough to plan for: 11% of people who bought these services in a year had one[6].
Frequently asked questions
Is public liability insurance a legal requirement for plumbers?
No, it is generally voluntary. Employers' liability insurance is the compulsory one once you employ people. In practice most agents, contractors and trade schemes will not use you without public liability cover.
Does public liability cover my own faulty work?
Usually not. It pays for damage your work causes to other people's property and for injuries, but the cost of redoing the work itself is normally excluded.
What is products and completed works cover?
It covers claims for damage or injury that happen after you have finished and left, such as a fitting that fails weeks later. Check your policy includes it and for how long.
Do I need public liability if I only work for a main contractor?
Usually yes. Most subcontract terms require your own cover at a stated minimum, and the contractor's policy may not protect you if your work causes damage.
References
Health and Safety Executive (2012). Employers' Liability (Compulsory Insurance) Act 1969: a brief guide for employers (HSE40) (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2026). Business population estimates for the UK and regions 2026: statistical release (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 49 (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑
Department for Business, Energy and Industrial Strategy (GOV.UK) (2021). Consumer protection study 2022: understanding the impacts and resolution of consumer problems (opens in a new tab) ↑