Heat pumps low carbon

MCS umbrella schemes vs full certification

MCS umbrella schemes compared with full certification for heat pump installers: cost, control, grant cash flow, risk and when to switch routes.

Ava research teamPublished 6 min read

On this page
  1. Two ways to sell grant-funded heat pumps
  2. What an umbrella scheme is
  3. What full certification involves
  4. Side by side
  5. Cost: per-job fees against fixed costs
  6. Control, risk and liability
  7. Who holds the grant money
  8. Choosing an umbrella operator
  9. Questions to put to an operator before signing
  10. Example: choosing a route for year one
  11. When to move to full certification
  12. Frequently asked questions
  13. References

Key takeaways

  • Umbrella scheme operators are MCS certified businesses that usually do the design and commissioning and subcontract some or all of the installation[1].
  • An umbrella gets you into grant-funded work quickly, but you give up control of design, the customer relationship and often the grant cash flow.
  • Full certification costs more time up front and puts the Licensee's name on every job[2], but the margin and the customer stay with you.
  • Check any operator against MCS's own five-point list before signing[1].

Two ways to sell grant-funded heat pumps

If you want to install heat pumps that qualify for the Boiler Upgrade Scheme, the installation has to be done by, or under, an MCS certified business. You can get there in two ways. You can certify your own business, with your own procedures, design responsibility and audits. Or you can work under an umbrella scheme, where an MCS certified operator carries the certification and you deliver some or all of the installation as its subcontractor.

Neither is better in every case. The right route depends on how many heat pump jobs you expect, how much design experience you have, how much control you want over your customers and how much cash you can tie up. This comparison sets out the trade-offs so you can choose on numbers rather than on a sales pitch.

What an umbrella scheme is

MCS describes an umbrella scheme as a structured framework that supports multiple small-scale renewable projects by simplifying funding, administration and compliance[1]. Umbrella schemes are run by MCS certified businesses that typically complete the design and commissioning of a new system but subcontract all or some of the installation, and those businesses must comply with MCS standards and Scheme requirements[1].

MCS sees them as a way for more installers to take part, to upskill engineers moving into low-carbon work and to let subcontractors assess demand, gain experience and work towards their own certification[1]. For a gas business testing heat pumps, that is the main attraction: you can do real, grant-funded installs without first building a full quality system.

What full certification involves

With full certification your business carries the responsibility. Under the redeveloped scheme you name a Main Contact, a Licensee who signs the Installer Agreement and accepts ultimate responsibility for meeting Scheme requirements, and a Technical Supervisor who makes sure each installation complies with the installation standard[2]. You apply through a certification body, pass MCS Scheme checks and audits, and run your own survey, design, quotation and handover process. The steps are set out in MCS certification for heat pump installers.

Side by side

Umbrella scheme and full certification compared
FactorUmbrella schemeFull MCS certification
Time to first grant jobShort, once you agree terms with an operatorLonger: procedures, application, checks and assessment
Design responsibilityUsually the operator'sYours
Customer contractOften with the operator, sometimes with youWith you
Grant application and paymentUsually handled by the operatorYou apply and receive the redemption
Cost structurePer-job fees or a margin taken by the operatorFixed certification and audit costs plus your time
Brand and reviewsMay sit under the operator's nameYours
Audit burdenMostly on the operatorOn you
Best forTesting demand and building experienceSteady volume and in-house design skill

Cost: per-job fees against fixed costs

Umbrella costs scale with volume. Each job carries the operator's fee or margin, which pays for its design, certification, grant administration and risk. Full certification is the reverse: fixed costs for the certification body, procedures, tools and your time, with no per-job fee. That gives a simple break-even question. Add up a year's umbrella fees at your expected volume and compare them with the annual cost of certifying yourself, including the hours your Technical Supervisor and office will spend on it.

At low volumes the umbrella usually wins. As volume grows, the per-job fees become the bigger number. Ask every operator for its fees in writing, per job and per technology, including what happens to the fee if a job is cancelled after the survey or the voucher is not issued.

Control, risk and liability

Working under an umbrella does not make you immune from responsibility for your own work. Every service supplied to a consumer is treated as including a term that it is performed with reasonable care and skill[3], and your subcontract will set out who answers for what. Read it for design errors, installation defects, callbacks and complaints, and check your insurance covers your role.

Subcontract heat pump installation is construction work in the tax sense too: the Construction Industry Scheme covers installing heating systems[4]. Make sure you are registered so deductions are handled correctly, and factor them into your cash flow.

Who holds the grant money

The voucher is applied for by the installer on the property owner's behalf, Ofgem asks the owner to confirm consent, and after commissioning and the MCS installation certificate the installer applies to redeem it; approved redemptions are paid on Ofgem's next weekly payment day[5]. Under an umbrella, the certified operator normally makes those applications, so the grant flows to the operator first.

Your subcontract must say exactly when you are paid: on completion, on the customer's balance, or only when the grant arrives. A route that looks cheap can be expensive if you wait for the operator's redemption before seeing your money.

Boiler Upgrade Scheme to September 2026: applications and paid installations
Boiler Upgrade Scheme to September 2026: applications and paid installationsComparison. Voucher applications: 160,874; Paid installations: 96,611.160,874Voucher applicationsVoucher applications: 160,87496,611Paid installationsPaid installations: 96,611Boiler Upgrade Scheme to September 2026: applications and paid installationsComparison. Voucher applications: 160,874; Paid installations: 96,611.160,874Voucher applicationsVoucher applications: 160,87496,611Paid installationsPaid installations: 96,611

Source: Department for Energy Security and Net Zero, 2026[6]

Show the data
ItemValue
Voucher applications160,874
Paid installations96,611

The gap between applications and paid installations shows how much work is in the pipeline at any time. There were 160,874 voucher applications by the end of September 2026[6] and 96,611 paid installations, including a record 3,332 in September 2026[7]. Some of that gap is cancelled or expired vouchers, but much of it is jobs waiting to be installed or redeemed, and somebody is carrying the cash.

Choosing an umbrella operator

  1. Check certification

    Confirm the operator is an MCS certified business[1].

  2. Check technologies

    Make sure it is certified for the technology types you want to install[1].

  3. Check location

    See where it is based and which areas it operates in[1].

  4. Check pricing

    Get its pricing structures and fees in writing[1].

  5. Check support

    Ask what training, guidance and technical support it offers for your technology[1].

  6. Check the paperwork

    Read the subcontract for payment timing, liability, branding, customer ownership and exit terms.

MCS says the first three checks can be done with its Find an Installer tool[1]. The last one is yours, and it is the one that decides whether the arrangement helps your business grow or keeps you as a labour supplier.

Questions to put to an operator before signing

Operators differ widely, from well-run businesses that genuinely help subcontractors grow to arrangements that treat installers as cheap labour. A short list of direct questions, asked before you sign, sorts them quickly. Ask for the answers in writing.

  • Whose name is on the customer's contract and quotation, and who handles the customer's questions after the install?
  • Who carries out the survey and heat loss, and can your engineer do it under review?
  • How quickly are designs returned, and what happens if the design changes on site?
  • When exactly are you paid, and does payment depend on the grant being redeemed?
  • Who deals with complaints, callbacks and warranty claims, and who pays for return visits?
  • What training or mentoring is included, and does the operator help subcontractors move to their own certification?
  • What notice period applies if either side wants to end the arrangement, and who keeps the customer records?

An operator that answers clearly and puts it in the subcontract is usually a safe partner. One that is vague about payment timing or customer ownership is telling you how the relationship will go.

Example: choosing a route for year one

Example (fictional): a heating firm expects around a dozen heat pump jobs in its first year and has one engineer who has finished a heat pump course but has designed only two systems under supervision. It compares two umbrella operators and chooses the one that lets the firm keep its own customer contract, pays on completion rather than on grant redemption and reviews every design with the engineer.

By the end of the year the firm has done 14 installs. Its umbrella fees for the year are now higher than its estimate of the annual cost of certifying, and the engineer's designs need few corrections. The firm decides to apply for full certification and keep the umbrella arrangement for the months while its application goes through.

When to move to full certification

  • Your annual umbrella fees are approaching the cost of certifying yourself.
  • Your designs rarely need correcting by the operator.
  • Customers come to you by name and you want reviews under your brand.
  • You can carry the grant until redemption without strain.
  • You have someone who can own the quality system and audits.

Frequently asked questions

Is an MCS umbrella scheme legal for grant work?

Yes. Umbrella schemes are operated by MCS certified businesses that must comply with MCS standards, and MCS publishes guidance on working through them.

Who designs the system under an umbrella scheme?

Usually the operator, which typically completes design and commissioning and subcontracts some or all of the installation.

Who receives the Boiler Upgrade Scheme grant?

The certified installer that applies for and redeems the voucher, which under an umbrella is normally the operator. Agree when you are paid.

How do I check an umbrella operator?

Confirm it is MCS certified for your technology, where it operates, its fees and what support it offers, then read the subcontract carefully.

References

  1. MCS (Microgeneration Certification Scheme) (2026). What is an umbrella scheme? (opens in a new tab) ↑

  2. MCS (Microgeneration Certification Scheme) (2026). Moving over to the redeveloped installer Scheme (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 49 (opens in a new tab) ↑

  4. GOV.UK (2026). What is the Construction Industry Scheme (opens in a new tab) ↑

  5. Ofgem (2026). Boiler Upgrade Scheme (BUS): installers (opens in a new tab) ↑

  6. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

  7. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo