Regulation compliance

Landlord gas safety records: an engineer's guide

What a landlord gas safety record (CP12) must contain under regulation 36, the landlord's duties, what the check covers, defects, retention and routine.

Ava research teamPublished 7 min read

On this page
  1. One record, many names
  2. The landlord's duties in brief
  3. What the record must contain
  4. Filling it in well
  5. A safety check is not a service
  6. Why rented homes need careful records
  7. Defects and remedial action
  8. Copies and retention
  9. Agents, access and wasted visits
  10. Your routine on a landlord check
  11. Worked example
  12. Frequently asked questions
  13. References

Key takeaways

  • The landlord gas safety record has legally required contents; there is no mandatory form, and 'CP12' is simply an old name.
  • Landlords must have every gas appliance and flue checked at least every 12 months and give tenants a copy within 28 days, or before a new tenant moves in.
  • The record must show each appliance and flue, any defect and remedial action, and the engineer's name, signature and registration number.
  • A safety check is not a full service; say clearly on the record and to the landlord what was and was not done.
  • Landlords must keep records until there have been two further checks; engineers should keep their own copies too.

One record, many names

Landlords call it a gas certificate, a gas safety certificate or a CP12. HSE's guidance calls it the landlord gas safety record and notes that it was previously known by those other names[1]. The name does not matter. What matters is that it records a check carried out under regulation 36 of the Gas Safety (Installation and Use) Regulations 1998 and contains the information the law requires.

No specific form is mandatory. Gas Safe Register does not issue its own form, many retailers and software providers produce them, and a landlord may design their own, provided it is given to the engineer to complete before the check and contains the minimum information[1]. As the engineer, your job is to make sure whatever form you use is complete and accurate.

The landlord's duties in brief

  • Have each gas appliance and flue checked for safety within 12 months of installation and then at intervals of not more than 12 months[2].
  • Use a Gas Safe registered engineer for the check[3].
  • Give existing tenants a copy of the record within 28 days of the check[2], and give new tenants a copy before they move in[3].
  • For tenancies of 28 days or less, the record may instead be prominently displayed in the property[2].
  • Keep the record until there have been two further checks of the appliance or flue[2].

The duty is the landlord's, not yours. But landlords rely on engineers to tell them what the record means, and many lean on you to remind them of deadlines. Knowing the rules lets you advise clearly and protects you if something is later disputed.

What the record must contain

Regulation 36 lists the required contents[2], and HSE sets out the same minimum in plain terms[1]:

  1. The date on which each appliance or flue was checked.
  2. The address of the premises.
  3. The name and address of the landlord, or of the landlord's agent where appropriate.
  4. A description and the location of each appliance or flue checked.
  5. Any safety-related defect identified.
  6. Any remedial action taken.
  7. Confirmation that the check covered the matters set out in regulation 26(9): flue, combustion air, operating pressure or heat input, and safe functioning.
  8. The name and signature of the individual carrying out the check.
  9. Their registration number.

Filling it in well

Fields on a landlord gas safety record and the gaps that cause trouble
FieldWhat good looks likeCommon gap
Landlord or agent detailsFull name and address, or the agent'sTenant's name entered instead
Appliance description and locationMake, model, type and room for each appliance'Boiler' with no location; a fire missed
FlueType and condition for each applianceFlue not recorded for an open-flued appliance
Checks under 26(9)Each item confirmed for each applianceTicked in bulk without readings
DefectsSpecific description and classification'Advised landlord' with no detail
Remedial actionWhat you did and what remains for the landlordNo record of the warning notice
Engineer detailsName, signature, registration numberMissing signature on an electronic record

Write defects for a landlord who has never seen the property. 'Flue terminal of living room gas fire within 300 mm of opening window, unsafe, appliance turned off and labelled, warning notice issued, landlord to arrange repositioning or replacement' tells them exactly what to do.

A safety check is not a service

Landlords often assume the annual check includes a full service. It does not have to. The check covers the matters the regulations require; a service involves cleaning, adjusting and replacing parts to the manufacturer's instructions. The Heating and Hotwater Industry Council and the Energy and Utilities Alliance have called for the mandatory annual check in rented homes to be upgraded to a full service plus a heating-system efficiency check[4], which tells you how often the two are confused.

Be explicit. Offer the check and the service as separate items, state on your paperwork which was done, and explain to landlords that a passed safety check does not guarantee the boiler will not break down next week.

Why rented homes need careful records

Rented homes are often older and less well maintained. In 2024, only 85% of private rented homes in England had central heating, against 95% of owner-occupied and local authority homes[5], and 22% of private rented homes failed the Decent Homes Standard, the highest of any tenure[6]. You will meet more old fires, unusual flues and disconnected appliances in rented property than elsewhere.

Homes in England with central heating by tenure, 2024English Housing Survey
Homes in England with central heating by tenure, 2024Column chart. Private rented: 85%; Owner-occupied: 95%; Local authority: 95%.0%25%50%75%100%Private rented: 85%85%Private rentedOwner-occupied: 95%95%Owner-occupiedLocal authority: 95%95%Local authorityHomes in England with central heating by tenure, 2024Column chart. Private rented: 85%; Owner-occupied: 95%; Local authority: 95%.0%25%50%75%100%Private rented: 85%85%PrivaterentedOwner-occupied: 95%95%Owner-occu-piedLocal authority: 95%95%Localauthority

Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2024[5]

Show the data
ItemValue
Private rented85%
Owner-occupied95%
Local authority95%

Record every gas appliance you find, including ones the landlord did not mention, and note any that belong to the tenant. Appliances owned by the tenant are generally not the landlord's responsibility under the check, but flues serving them may be, so describe what you saw.

Defects and remedial action

When you find a defect, follow your unsafe situations procedure, make the appliance safe where required, issue the right notice and record it. Then make sure the landlord or agent knows the same day, in writing. The tenant needs to know too, in plain words, because they are the person living with the appliance tonight.

The record must show both the defect and the remedial action[2]. If the remedy is for the landlord to arrange, say so. If you have quoted for it, keep the quote separate from the record so nobody confuses a safety finding with a sales pitch.

Copies and retention

Landlords must keep each record until there have been two further checks of that appliance or flue; where an appliance or flue is removed, the record must be kept for two years from the last check[2]. HSE's guidance puts the minimum at two years, and longer if the landlord uses the timing flexibility for early checks[1]. Electronic records are acceptable if they can be reproduced in hard copy, are secure from loss and interference and identify the engineer[1].

Keep your own copies for at least as long. When a landlord loses their copy two years later, or a tenant disputes what was checked, your record is the evidence.

Agents, access and wasted visits

Much landlord work comes through letting agents, and much of the friction is about access. A tenant who is not told about the visit, a key that is not at the office or a dog loose in the hallway can turn a 40-minute check into a wasted trip. Agree a routine with each agent: who books with the tenant, how much notice is given, where keys are collected and what happens if nobody answers.

  • Ask the agent to confirm the appointment with the tenant in writing and to send you the confirmation.
  • Ring or text the tenant the day before to confirm.
  • If you cannot get in, record the date, time and what you did (knocked, called, left a card) and send it to the agent the same day. Landlords need evidence of their attempts.
  • Agree in advance whether failed visits are charged, and put it in your terms.

Your routine on a landlord check

  1. Before the visit

    Confirm the landlord or agent details, the address, the appliances listed last year and who will give access.

  2. On arrival

    Show your ID card, explain to the tenant what you are doing and how long it will take.

  3. Check every appliance and flue

    Including any not on last year's list. Carry out the checks under regulation 26(9) and record readings.

  4. Deal with defects

    Make safe, label, issue notices and explain to the tenant.

  5. Complete and sign the record

    Every field, every appliance, signature and registration number.

  6. Send it the same day

    To the landlord or agent, and to the tenant if agreed, then file your copy by property and date.

Worked example

Example: a fictional engineer attends a two-bedroom flat for a letting agent. Last year's record lists a combi boiler and a hob. On site she also finds a gas fire in the living room that the tenant says is never used. She checks all three, records the fire's flue as blocked by debris, classes the fire as unsafe, disconnects and labels it, issues a warning notice and explains it to the tenant. The record lists three appliances, the defect and the action, and goes to the agent that afternoon with a note that the landlord must arrange repair or removal before the fire is used.

For the timing rules that decide when the next check is due, see the two-month window for landlord checks. For electronic certificates and signatures, see digital gas certificates.

Frequently asked questions

Is a CP12 the same as a landlord gas safety record?

Yes. CP12 is an older name for the record. There is no mandatory form; what matters is that the record contains the information required by regulation 36.

Does the annual gas safety check include a boiler service?

Not necessarily. The check covers the safety matters the regulations require. A service is a separate job, so make clear on your paperwork which was done.

Do I need to check appliances that belong to the tenant?

The landlord's duty covers appliances and flues they provide. Tenant-owned appliances are generally the tenant's responsibility, but record what you find, and check any flue the landlord is responsible for.

How long must the record be kept?

Landlords must keep it until there have been two further checks of the appliance or flue, which in practice means at least two years. Engineers should keep their own copies for at least as long.

References

  1. Health and Safety Executive (2026). Gas safety check records and what to keep (opens in a new tab) ↑

  2. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  3. GOV.UK (2026). Your landlord's safety responsibilities (opens in a new tab) ↑

  4. Heating and Hotwater Industry Council (HHIC) (2025). Call to enhance Gas Safety Checks (opens in a new tab) ↑

  5. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 2, energy efficiency (opens in a new tab) ↑

  6. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo