Key takeaways
- A landlord gas safety check done in the two months before the deadline date is treated as if it were done on the deadline date, so the anniversary does not drift.
- A check done earlier than that starts a new 12-month cycle from the date it was actually done.
- A separate one-off option lets landlords bring the deadlines of different appliances at the same property into line; read regulation 36A before relying on it.
- Records must be kept until two further checks have been carried out when the timing flexibility is used.
- Engineers who run a simple renewal calendar, contacting landlords about ten weeks out, keep checks inside the window and fill their diaries predictably.
Why the window exists
Landlords must have each gas appliance and flue checked within 12 months of installation and then at intervals of not more than 12 months[1]. Before 2018, doing a check a few weeks early to fit an engineer's diary meant the next one was due a few weeks earlier too, and over the years the date crept backwards. Landlords with several properties ended up with renewals scattered across the calendar and paid for checks earlier than they needed to.
Regulation 36A, inserted on 6 April 2018, fixed that[2]. HSE summarises it simply: you can have the annual check carried out up to two months before the due date, and the original deadline still applies[3].
How the rule works
The regulation uses the term 'deadline date', meaning the last day of the 12-month period within which the check has to be made[2]. Where a check is completed within the period of two months ending with the deadline date, it is treated as having been made on the deadline date[2]. So the next 12 months run from the old deadline, not from the day the engineer happened to visit.
- Check done in the last two months before the deadline: the anniversary stays the same.
- Check done more than two months before the deadline: the window does not apply, so the next 12 months run from the actual date of the check, and the anniversary moves earlier.
- Check done after the deadline: the landlord has missed the legal interval, and the next 12 months run from the late check.
Example: a fictional flat had its last check on 10 March 2026, so the deadline date for the next check falls in early March 2027. If the next check is done at any time in the two months ending on that deadline date, from early January 2027, it counts as done on the deadline date and the following deadline stays in early March 2028. If it is done in November 2026, the cycle restarts from November.
Timing scenarios at a glance
| When the check is done | Inside the two-month window? | When the next deadline falls |
|---|---|---|
| Mid-February | Yes | Early March the following year |
| Mid-January | Yes | Early March the following year |
| Mid-December | No, more than two months early | Mid-December the following year |
| Mid-March, after the deadline | No, late | Mid-March the following year, and the landlord missed the deadline |
The one-off alignment option
Regulation 36A also contains a separate discretion that a landlord may use only once for each appliance or flue, and only to bring that appliance's deadline into line with the deadline for another appliance or flue in the same premises[2]. It is aimed at properties where, say, a boiler and a gas fire were checked on different dates and the landlord wants one visit a year.
Because it is a one-off and the wording is precise, read the regulation itself before advising a landlord to rely on it, and note on the record that the dates have been aligned. In most cases the simpler fix is to check every appliance on the same visit from now on, inside the window for the earliest deadline.
Records when the window is used
Using the timing flexibility has a record-keeping consequence. HSE says landlords must keep records for at least two years, and where they use the flexibility, until two further gas safety checks have been carried out[4]. Existing tenants must still receive a copy within 28 days of the check[1].
Put the deadline date, not just the date of the visit, on your own job record and on any renewal list you keep for the landlord. That single extra field is what lets you prove later that a check fell inside the window.
The rented homes you are checking
Private rented homes are often in the poorest condition of any tenure. In England, 22% of private rented homes failed the Decent Homes Standard, against 10% in the social rented sector[5]. Older appliances and flues mean more defects found on checks, and more remedial visits that need time before the deadline.
Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2024[5]
Show the data
| Item | Value |
|---|---|
| Private rented | 22% |
| Social rented | 10% |
That is another reason to book early in the window rather than in its last week: if you find a defect that needs a part, you still have time to fix it before the deadline.
A renewal calendar that keeps checks in the window
Record every deadline date
For each property and appliance, store the deadline date and the landlord or agent contact, separate from the visit date.
Contact the landlord about ten weeks out
That gives time to agree a date that falls inside the two-month window.
Book in the first half of the window
Aim for six to eight weeks before the deadline, leaving room for no-access visits and remedial work.
Confirm with the tenant
Through the agent or directly, as agreed, a week before and the day before.
Chase failed access the same day
Rebook immediately and tell the landlord in writing, with the deadline date.
Issue the record and roll the date
Send the record, then set the next contact date from the deadline date, not from the visit.
Why the window helps your own diary
The window is not just a convenience for landlords. For a firm with a large lettings book, it turns renewals into planned work. Two months of flexibility for every check means you can group properties by area, fill quiet weeks in spring and summer and keep engineers off the motorway between jobs at opposite ends of your patch.
- Group renewals by postcode district and book them on the same day where the windows overlap.
- Use renewals to fill gaps after cancellations, starting with checks whose windows close soonest.
- Keep a few slots free each week in winter for remedial visits from checks that found defects.
- Review the renewal list monthly so nothing reaches its last fortnight unbooked.
A reminder script that works
Script: 'Hello, it's Kim from Fernside Heating (a fictional firm). The gas safety check at 14 Fern Street is due by early March. If we visit any time from early January, the anniversary date stays the same, so you will not lose any time. Could we book a date in January or February? We will confirm with your tenant.'
Many landlords still believe an early check costs them months. Explaining the window in one sentence removes the reason to wait until the last week, which is when access problems turn into missed deadlines.
Landlords and tenants will ring to book or rearrange. If your engineers cannot answer during jobs, an AI Employee such as Ava can answer those calls and book the check into your diary as a routine visit.
Portfolios and multiple appliances
- For landlords with several properties, send one list each quarter showing every deadline due in the next four months.
- Where one property has appliances with different deadlines, check them all on one visit inside the window of the earliest deadline, and explain the effect on the others.
- For houses in multiple occupation, agree how access to each room is arranged before the visit.
- For short lets, remember the record may be displayed in the property for tenancies of 28 days or less[1].
When a deadline is missed
If a deadline has passed, the priority is to carry out the check as soon as possible and make sure the appliances are safe. Tell the landlord plainly that the legal interval was missed, record the date the check was actually done and start the new cycle from that date. Do not backdate anything. A landlord who missed a deadline because a tenant refused access will want your record of the attempts, so keep it.
For what the record must contain, see landlord gas safety records: an engineer's guide. For sending and storing records electronically, see digital gas certificates, and for the alarms landlords must also provide, see carbon monoxide alarm rules for rented homes.
Frequently asked questions
Can a landlord gas safety check be done early?
Yes. If it is done within the two months ending with the deadline date, it is treated as done on the deadline date, so the anniversary stays the same. If it is done earlier than that, the next 12 months start from the actual date.
When did the two-month rule start?
Regulation 36A was inserted into the Gas Safety (Installation and Use) Regulations on 6 April 2018.
What if the tenant will not let the engineer in?
Record every attempt, tell the landlord in writing the same day and rebook. Landlords need evidence that they took reasonable steps to arrange the check.
Does the record need to show the deadline date?
The legal contents do not include it, but recording the deadline date alongside the visit date on your own records makes it easy to show the check fell inside the window.
References
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2018). The Gas Safety (Installation and Use) Regulations 1998, regulation 36A (opens in a new tab) ↑
Health and Safety Executive (2026). Domestic gas: frequently asked questions (opens in a new tab) ↑
Health and Safety Executive (2026). Gas safety check records and what to keep (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑