Key takeaways
- Electronic landlord gas safety records are acceptable to HSE if they can be reproduced in hard copy, are secure from loss and interference, and uniquely identify the engineer.
- An electronic signature, a scanned signature, the engineer's licence number or their name can identify the engineer; the record must still contain everything regulation 36 requires.
- Tenants can receive their copy electronically if they are happy to and can access it, but must be given paper if they ask.
- Keep records for at least two years, and until two further checks when the timing flexibility is used; keep your own copies outside any single app.
- Choose certificate software that locks records after signing, exports clean PDFs and protects accounts with two-step login.
The short answer
Yes. HSE accepts landlord gas safety records kept and issued electronically, provided three conditions are met: the record can be reproduced in hard copy when required, for example for the tenant, HSE or a housing department; it is secure from loss and interference; and it uniquely identifies the engineer who carried out the check[1]. HSE's frequently asked questions say the same in answer to whether a landlord can keep the record electronically[2].
What changes with digital records is not the law on content. The record must still contain everything regulation 36 requires, including the name, signature and registration number of the person who did the check[3]. A certificate app makes it easier to get that right, and easier to get it wrong at scale if the template is poor.
The three conditions in practice
- Hard copy on demand: the landlord, the tenant or an inspector must be able to get a printable version. A clean PDF that prints legibly on A4 meets this; a record that only exists inside an app's screen does not.
- Secure from loss: the record must survive a lost phone, a cancelled subscription or a broken laptop. That means automatic backup and an export you control.
- Secure from interference: once signed, the record should not be editable without a visible trail. If something must be corrected, issue a corrected record and keep the original.
- Unique identification of the engineer: see the next section.
Signatures and identifying the engineer
HSE lists acceptable ways for an electronic record to uniquely identify the engineer: an electronic signature, a scanned signature, the engineer's Gas Safe licence number or the engineer's name[1]. Most certificate apps capture a signature on screen, which covers it. Whatever method you use, make sure the registration number is on the record too, because the regulations require it[3].
The landlord does not have to sign the record. HSE notes that the landlord's name and address, or the letting agent's, must appear on it, but no landlord signature is needed[1].
| Method | Works well when | Watch out for |
|---|---|---|
| On-screen signature captured by the app | Signed on site at the end of the check | Shared logins that let one engineer sign as another |
| Stored scanned signature | Office issues records after the visit | Signature applied without the engineer reviewing the record |
| Engineer's licence number | Used alongside the name and signature fields | Number for the wrong engineer pulled from a template |
| Engineer's typed name | Combined with personal logins | Generic names such as 'Engineer 1' |
Give every engineer their own login. A shared account undermines the whole point of identifying who did the check, and it makes it impossible to show later who signed what.
Sending records to landlords and tenants
Existing tenants must receive their copy within 28 days of the check[3]. HSE says electronic copies are fine if the tenant is happy to receive their copy electronically and can access it, but they must be given a paper copy if they ask[1]. With the landlord's agreement, the engineer may send the electronic record directly to the tenant[1].
- Agree with each landlord or agent who sends the tenant's copy: you, the agent or the landlord.
- Send records from your business email or app, never from a personal address.
- Name the file clearly: address, appliance count and check date.
- Keep a note of when and to whom each record was sent.
- Have a simple way to post a paper copy if a tenant asks.
Keeping copies
Landlords must keep records for at least two years, and if they use the timing flexibility for early checks, until two further gas safety checks have been carried out[1]. In practice many landlords lose them, and the engineer's copy becomes the one everyone asks for.
- Export every signed record as a PDF to storage you control, in addition to the app.
- Organise by property address and check date, not only by landlord.
- Keep records for at least as long as landlords must, and longer for your own protection if your privacy notice allows.
- Test that you can retrieve a record from three years ago in under a minute.
- Before changing certificate software, export everything and check the exports open.
Corrections, reissues and disputes
Digital records make it tempting to fix a typo by editing the original. Resist it. If a record needs correcting after it has been signed and sent, issue a new version that says it replaces the earlier one, explain the change in a line and keep both. That way the record stays secure from interference, and nobody can later claim the original said something different.
- Minor errors, such as a misspelt landlord name: reissue the record marked as a correction and resend it to everyone who had the first version.
- Missed appliance: this is not a correction. Return, check it and issue a record covering it.
- Disputed findings: do not change a defect description to satisfy a landlord. Add a note of the dispute and, if needed, arrange a second visit.
- Keep the audit trail your software provides, and export it with the records.
Security: records are a target
Certificate apps and business email accounts hold landlords' names and addresses, tenants' details and property information. Cyber attacks are common: 43% of UK businesses reported a breach or attack in the 12 months before the 2025 survey, 35% of micro businesses identified phishing attacks, and only 9% of micro businesses were aware of the government's Cyber Essentials scheme[4].
- Turn on two-step login for the certificate app and the email account that sends records.
- Be wary of emails asking you to 'resend the certificate' to a new address; confirm by phone with the landlord or agent.
- Remove access for engineers who leave on their last day.
- Keep devices locked and updated, and enable remote wipe on phones and tablets.
Choosing certificate software
- Templates that match the current regulation 36 contents and current testing standards.
- Records locked after signing, with any correction issued as a new version.
- Clean PDF export with your logo, the landlord or agent details and the registration number.
- Individual logins and signatures for each engineer.
- Automatic backup and bulk export of all records.
- Photo attachments, so flue terminals and defects can be stored with the record.
- Clear terms on where data is stored and how it is protected under UK GDPR.
Commissioning paperwork has moved the same way: the paper Benchmark checklist is no longer maintained, and the record now lives online and in the Benchmark apps[5]. A single digital workflow for safety records, commissioning and service records saves time and reduces lost paperwork.
Moving from paper to digital
Pick the software
Trial two options on real jobs for a fortnight and check the PDF output against the regulation 36 list.
Set up logins and signatures
One per engineer, with their registration details checked.
Agree delivery with each agent
Who sends records to tenants, and to which address.
Scan recent paper records
At least the last two checks for each property you look after, filed by address.
Run both for a month
Keep paper pads in vans as a fallback until the digital route is reliable.
Remove old pads
Once you are confident, take paper forms out of circulation to avoid outdated templates.
Worked example
Example: a fictional three-engineer firm moves to a certificate app. In the first month an agent asks for a record from two years ago; the office finds the scanned paper copy in under a minute. A tenant asks for a paper copy, and the office posts one the same day. When one engineer's tablet is stolen, the firm wipes it remotely, resets his login and confirms all records were backed up. A review of the first 50 digital records finds every one signed, numbered and sent within 28 days.
For what the record itself must contain, see landlord gas safety records. For keeping renewal dates in the window, see the two-month window for landlord checks, and for carbon monoxide alarm duties that landlords often ask about at the same time, see carbon monoxide alarm rules for rented homes.
Frequently asked questions
Is a digital gas safety certificate legally valid?
Yes, if the electronic record can be reproduced in hard copy when required, is secure from loss and interference and uniquely identifies the engineer, and it contains everything regulation 36 requires.
Does a digital gas certificate need a handwritten signature?
No. HSE accepts an electronic signature, a scanned signature, the engineer's licence number or their name as ways to identify the engineer. The record should still show the engineer's name and registration number.
Can I email the gas safety record to the tenant?
Yes, with the landlord's agreement and if the tenant is happy to receive it electronically and can access it. The tenant must be given a paper copy if they ask.
Does the landlord have to sign the gas safety record?
No. The landlord's or agent's name and address must appear on it, but HSE says the landlord does not need to sign it.
References
Health and Safety Executive (2026). Gas safety check records and what to keep (opens in a new tab) ↑
Health and Safety Executive (2026). Domestic gas: frequently asked questions (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑
Department for Science, Innovation and Technology (GOV.UK) (2025). Cyber security breaches survey 2025 (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2026). Benchmark goes digital - what homeowners need to know (opens in a new tab) ↑