Phones call handling

Handling repair calls from letting agents and landlords

How a plumbing firm should take repair calls from letting agents and landlords: works order details, approval limits, tenant contact, updates and payment.

Ava research teamPublished 7 min read

On this page
  1. Why agent and landlord work is different
  2. What to capture on every works order call
  3. Approval limits and what to do above them
  4. Gas safety dates drive the calls
  5. Damp, leaks and faster response expectations
  6. Call flow for a new works order
  7. Keeping the agent updated
  8. When tenants call you directly
  9. Getting paid
  10. Example: one leak, three phone calls
  11. Frequently asked questions
  12. References

Key takeaways

  • Agent work has three parties: the agent who instructs, the landlord who pays and the tenant who lets you in. Capture all three on the first call.
  • Never start without a works order number, an approval limit and the tenant's contact details.
  • Private rented homes need more work: 22% failed the Decent Homes Standard, against 10% of social rented homes[1].
  • Gas safety dates drive repeat calls: appliances must be checked at least every 12 months[2], and tenants must get the record within 28 days[3].
  • Business customers can be charged statutory interest of 8% plus base rate on late payments[4]; agree invoicing terms before the first job.

Why agent and landlord work is different

A domestic customer who rings about a leaking cylinder is the person who decides, pays and opens the door. With a letting agent, those roles split three ways. The agent instructs you, the landlord pays (often through the agent), and the tenant has the problem and the key. Most of the friction in agent work, from wasted journeys to unpaid invoices, comes from losing track of one of the three on the first call.

The work itself is steady. Only 85% of private rented homes in England had central heating in 2024, against 95% of owner-occupied and local authority homes[5], and 22% of private rented homes failed the Decent Homes Standard, the highest of any tenure[1]. Older systems and absent owners mean more breakdowns, more callbacks and more paperwork per job than typical homeowner work.

Homes failing the Decent Homes Standard in England by tenure, 2024English Housing Survey
Homes failing the Decent Homes Standard in England by tenure, 2024Column chart. Private rented: 22%; Social rented: 10%.0%10%20%30%Private rented: 22%22%Private rentedSocial rented: 10%10%Social rentedHomes failing the Decent Homes Standard in England by tenure, 2024Column chart. Private rented: 22%; Social rented: 10%.0%10%20%30%Private rented: 22%22%Private rentedSocial rented: 10%10%Social rented

Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2024[1]

Show the data
ItemValue
Private rented22%
Social rented10%

What to capture on every works order call

Use the same checklist whoever takes the call, whether that is the office, an engineer between jobs or an answering service. Missing any of these usually means a second call later, often at a worse time.

A works order checklist for letting agent and landlord calls
DetailWhy you need itHow to ask
Agency, branch and caller nameAgents have several branches and property managers'Which branch are you calling from, and who should I update?'
Works order or job referenceIt is often required on the invoice to get paid'What's the works order number for this one?'
Property address and postcodeObvious, but flats and annexes cause confusion'Is that the ground-floor flat or the whole house?'
Fault as reported by the tenantShapes urgency and what parts to bring'What exactly has the tenant told you?'
Tenant name and phone numberYou need to arrange access directly'Can I contact the tenant to arrange a time?'
Approval limitStops work stalling halfway or invoices being disputed'What can we spend without further approval?'
Who pays and where to invoiceAgent, landlord or a managing company'Do we invoice you or the landlord?'
Keys, alarms and parkingSaves a wasted journey'Are keys held at the branch if the tenant is out?'

Approval limits and what to do above them

Most agents give contractors a spending limit per job, above which the landlord must approve. If you do not ask, you find out when the invoice is queried. Agree the limit on the call and write it on the job sheet so the engineer knows where the line is.

When a job will exceed the limit, the engineer should stop at a safe point and call the office, and the office should send the agent a short written quote with photos. Scripts help:

  • Engineer to office: 'The leak is from the cylinder, not the valve. Replacing it is over the agent's limit. I have isolated it and the tenant has cold water. Can you get approval?'
  • Office to agent: 'Our engineer has made the property safe. The fault needs a new cylinder, which is above your limit. I am emailing the quote and photos now. Can you get the landlord's approval today so we can book it in?'
  • If the agent cannot reach the landlord: 'Understood. We will leave it safe and wait for your go-ahead. Please note the tenant has no hot water, so the landlord may want to decide quickly.'

Gas safety dates drive the calls

Landlords must have each gas appliance and flue checked for safety within 12 months of installation and at intervals of not more than 12 months[2], and existing tenants must get a copy of the gas safety record within 28 days of the check[3]. For a plumbing and heating firm, that turns each property into a predictable yearly visit, and missed dates turn into urgent calls from worried agents.

  • Keep a renewal list by property, not by agent, so you keep the work if the property moves agency.
  • Contact the agent several weeks before each due date with proposed slots, rather than waiting to be asked.
  • Send the record to the agent the same day and note when and how you sent it, so the 28-day duty can be met.
  • Flag any appliance you could not access so the agent can follow it up; do not let it disappear from the list.

Damp, leaks and faster response expectations

About 5% of dwellings in England, around 1.4 million, had a damp problem in 2024[6], and leaks are a common cause. In the social rented sector, Awaab's Law now requires landlords in England to deal with emergency hazards within 24 hours[7], and to investigate other significant hazards within 10 working days and complete safety work within five working days of the investigation ending[8]. If you also work for housing associations, expect their contracts to carry those clocks.

Private letting agents are not bound by the same law, but many now expect leaks and loss of heating to be treated as same-day work. Ask each agent to define what they consider urgent and how they want you to respond out of hours, and write it into your agreement with them.

Call flow for a new works order

  1. Take the works order

    Run the checklist above, read back the address, reference and approval limit, and confirm who to update.

  2. Set urgency

    Decide with the agent whether it is an emergency, a next-day job or routine, using the tenant's description.

  3. Contact the tenant

    Call the tenant within the agreed time to book access. If you cannot reach them, tell the agent the same day.

  4. Confirm in writing

    Email or message the agent with the booked time, reference and engineer's name.

  5. Attend and report

    Send a short completion note with photos, parts used and any further work recommended.

  6. Invoice with the reference

    Use the agent's works order number and send the invoice where they asked.

Keeping the agent updated

Agents judge contractors mostly on communication, because their landlord and tenant both ring them for news. A simple update at each stage reduces chasing calls into your office. Keep updates short and consistent, as in these example messages:

  • Booked: 'Ref 4471, 12 Elm Road. Booked Thursday morning, engineer Sam. Tenant confirmed.'
  • No access: 'Ref 4471. Attended 9.10am, no answer, card left and tenant called twice. Please advise.'
  • Complete: 'Ref 4471. Leaking valve replaced, system tested, no further work needed. Invoice to follow.'
  • Further work: 'Ref 4471. Made safe. New cylinder recommended; quote attached. Awaiting approval.'

When tenants call you directly

Once you have attended a property, tenants often keep your number and ring you next time instead of the agent. It feels like good service to help, but it can leave you doing work nobody has authorised. Agree a rule with each agency and give whoever answers your phone a script that keeps everyone on side.

  • In hours: 'Thanks for calling us. Your letting agent needs to approve the repair first. If you report it to them now and mention our name, we can usually book it quickly once they send the order.'
  • Out of hours with a genuine emergency: take the details, make the property safe if you offer emergency cover and the agent's agreement allows it, then tell the agent first thing in the morning.
  • Never agree a price or a non-urgent visit directly with a tenant. The landlord is your customer, and the bill may be disputed.
  • Log every direct tenant call against the property so the agent can see the history.

Handled this way, direct calls build your standing with the agent rather than undermining it, because they see you protecting their relationship with the tenant and the landlord.

Getting paid

Agree payment terms with each agency before the first job: who is invoiced, how quickly they pay and what happens when a landlord disputes a bill. Business-to-business invoices that are paid late can carry statutory interest of 8% plus the Bank of England base rate[4]. You may never need to charge it, but knowing the right exists makes the terms conversation easier. Keep the works order number, approval limit and completion photos together, because disputes almost always turn on one of them.

Example: one leak, three phone calls

Example: a fictional agent calls at 2pm about a leak under a kitchen sink in a rented flat. The office takes the works order number, a spending limit, the tenant's mobile and confirms invoices go to the agent. The tenant is called within the hour and agrees a 5pm visit. The engineer finds a corroded isolation valve, replaces it within the limit and sends photos. The agent gets three short messages (booked, complete, invoice) and no chasing calls. Compare that with the version where nobody asked for the tenant's number: the engineer turns up, nobody answers, and the agent spends the evening apologising to a landlord. For the access side of the job, see the call script in arranging access with tenants.

Frequently asked questions

What should I ask a letting agent before attending a repair?

The works order number, property address, fault description, tenant contact details, approval limit, who to invoice and how keys and access work.

What if a repair costs more than the agent's approval limit?

Make the property safe, stop and send the agent a written quote with photos. Do not continue until you have approval in writing.

Who sends the gas safety record to the tenant?

The landlord is responsible for giving the record to tenants within 28 days of the check. Send it to the agent promptly and record when you did, so they can meet that duty.

Can I contact the tenant directly?

Yes, if the agent gives you the tenant's details for that purpose. Use them only to arrange the repair and keep the agent informed.

References

  1. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑

  2. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  4. GOV.UK (2026). Late commercial payments: charging interest (opens in a new tab) ↑

  5. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 2, energy efficiency (opens in a new tab) ↑

  6. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑

  7. Ministry of Housing, Communities and Local Government (GOV.UK) (2025). Awaab's Law: Guidance for social landlords - Timeframes for repairs in the social rented sector (opens in a new tab) ↑

  8. Ministry of Housing, Communities and Local Government (GOV.UK) (2026). Awaab's Law: Guidance for social landlords - Timeframes for repairs in the social rented sector (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo