Heat pumps low carbon

Heat pump electricity tariffs: what to tell customers

What heat pump installers should tell customers about electricity tariffs: smart meters, time-of-use windows, standing charges, batteries and controls.

Ava research teamPublished 6 min read

On this page
  1. Why tariff advice is part of the job
  2. Where most customers start
  3. Smart meter first
  4. Tariff types in plain words
  5. Using cheaper windows without losing comfort
  6. Batteries and solar
  7. Standing charges and the gas supply
  8. Controls and connectivity
  9. Customers who need extra care
  10. Example: setting up a schedule at handover
  11. Staying within your role
  12. Frequently asked questions
  13. References

Key takeaways

  • A smart meter comes first; government is rolling them out so households can use flexible tariffs with clean heat[1].
  • Multi-rate tariffs charge different rates at peak and off-peak times, and together cannot be more than the price cap[2].
  • Scheduling hot water and some heating into cheaper windows can cut the average price per kWh, but the design still has to keep homes warm at peak times.
  • Explain options and trade-offs; do not pick a supplier or promise a saving.

Why tariff advice is part of the job

A heat pump's running cost depends on two things you influence directly, the design and the controls, and one you do not, the customer's tariff. Customers ask installers about tariffs because nobody else is in their home talking about heating, and a poor tariff choice can undo the efficiency of a good install. You do not need to become an energy broker. You need to explain how tariffs work, what to look for and how the heat pump can be set up to make use of them.

The goal is a customer who understands the trade-offs and makes their own choice, with controls set to match. That keeps you on safe ground and keeps the customer's expectations realistic.

Where most customers start

Most households are on a tariff linked to Ofgem's price cap. A single-rate tariff charges the same unit rate all day; multi-rate tariffs such as Economy 7 charge one rate during peak hours and a different one off peak, and together the rates cannot be more than the price cap[2]. For October to December 2026 the cap is £1,723 a year for a typical Direct Debit customer, up 4% on the previous period[2]. Standing charges also vary by region, based on factors such as how many people live there and how much energy is used[2].

Ask the customer to show you their current tariff name, unit rates and standing charges at the survey. Write them down. Every later conversation about running costs needs that starting point. Customers moving from heating oil or LPG are used to fuels that sit outside the price cap altogether[3], so explain that electricity tariffs work differently and that the cap limits unit rates and standing charges rather than total bills.

Smart meter first

Time-of-use tariffs need a meter that records when electricity is used. The Warm Homes Plan says government is rolling out smart meters so everyone can access money-saving flexible tariffs alongside clean heat systems[1]. If the customer does not have a working smart meter, suggest they ask their supplier to fit one before the heat pump goes in, so the option of a flexible tariff is open from the first winter.

Tariff types in plain words

Common tariff types and when they suit heat pump households
Tariff typeHow it worksFits a heat pump when
Single rateSame price per kWh all dayThe household prefers simplicity or has little flexibility
Multi-rate (Economy 7 style)Cheaper fixed window, usually overnightHot water can be heated overnight and the design suits it
Time-of-useSeveral price bands across the day, sometimes changing dailyControls can schedule heating and hot water around cheap periods
Heat pump tariffsA cheaper rate tied to heat pump use, on supplier termsThe customer meets the supplier's conditions and checks the rates

Tariff names, conditions and rates change often, so describe the type and let the customer compare current offers. Avoid recommending a particular supplier.

Using cheaper windows without losing comfort

The simplest win is hot water. A cylinder can be heated in a cheaper window and hold its heat for hours, so scheduling the main reheat into that window lowers the cost of hot water with little effect on comfort. Space heating is subtler. A well-insulated home can be warmed a little more before a peak period and coast through it, but a heat pump pushed hard in a short window may run at a higher flow temperature and lower efficiency.

  • Schedule the main hot water reheat in the cheapest window, with a top-up if the household needs it.
  • Use gentle pre-heating before peak periods only where the home holds heat well.
  • Keep weather compensation active, so the flow temperature stays as low as the weather allows.
  • Avoid switching the heating off for long peak periods; recovering from a cold house can cost more than it saves.
  • Review the schedule after the first month of bills with the customer.

Batteries and solar

Some customers will ask about adding a battery. The Warm Homes Plan estimates that households who switch to a time-of-use tariff and charge a battery during off-peak hours could save up to an additional £300, with savings depending on the home and circumstances[1]. Present that as an upper estimate. A battery is a separate investment with its own payback, and the customer should get advice and a quote for it on its own merits rather than as part of the heat pump decision.

Standing charges and the gas supply

Standing charges are paid whatever the usage. Under the October to December 2026 cap, the average daily standing charge is 54.83p for electricity and 29.68p for gas[2]. A household that keeps gas only for a hob still pays the gas standing charge every day, which is worth pointing out when customers ask whether to cap the gas supply after a heat pump goes in.

Average daily standing charges, Direct Debit, October to December 2026
Average daily standing charges, Direct Debit, October to December 2026Comparison. Electricity: 54.83 pence a day; Gas: 29.68 pence a day.54.83 pence a dayElectricityElectricity: 54.83 pence a day29.68 pence a dayGasGas: 29.68 pence a dayAverage daily standing charges, Direct Debit, October to December 2026Comparison. Electricity: 54.83 pence a day; Gas: 29.68 pence a day.54.83 pence a dayElectricityElectricity: 54.83 pence a day29.68 pence a dayGasGas: 29.68 pence a day

Source: Ofgem, 2026[2]

Show the data
ItemValue
Electricity54.83 pence a day
Gas29.68 pence a day

Controls and connectivity

Getting value from a flexible tariff usually means scheduling through the heat pump's controls or an app. Most homes have internet access, 96% of households in Great Britain by early 2020[4], but far fewer people use connected heating controls: 18% of adults used internet-connected energy or lighting controls in early 2020[5]. Set up the schedule with the customer at handover, show them where to change it and leave it written down.

If the customer is not comfortable with apps, a simple fixed schedule on the controller with hot water in a cheaper window may capture most of the benefit with none of the fuss.

Customers who need extra care

Not every household can chase the cheapest window. Older customers, people who are at home all day with health conditions, families with babies and anyone on a prepayment meter may value steady warmth and predictable bills above the lowest possible price. A schedule that saves money by letting the house cool in the late afternoon may be the wrong choice for them, even if it works for their neighbours.

  • Ask how the household uses the home during the day before suggesting any schedule.
  • For prepayment customers, explain that rates and payment methods differ, and suggest they check their options with their supplier.
  • Mention that suppliers keep a Priority Services Register for customers who need extra support, and that customers can ask to join it.
  • Set comfort first and savings second, and write down the reason for the schedule you chose.

This is part of giving honest advice, and it is also good business. A vulnerable customer who is cold because of a tariff schedule you suggested will rightly blame the installer, not the supplier.

Example: setting up a schedule at handover

Example (fictional): a couple with a new heat pump have just moved to a time-of-use tariff with a cheaper overnight window and a more expensive late-afternoon peak. The installer schedules the cylinder's main reheat in the overnight window with a short top-up in the early afternoon, keeps weather compensation active for space heating and sets a modest temperature boost an hour before the peak period starts.

The installer writes the schedule on the handover sheet and books a short call after the first month's bill. On that call the couple say the house is comfortable but the afternoon top-up is rarely needed, so the installer removes it remotely with their permission.

Staying within your role

  1. Explain, do not choose

    Describe tariff types and how the heat pump can use them; let the customer pick the supplier and tariff.

  2. Use their numbers

    Base any illustration on the customer's actual tariff and usage, with dates.

  3. State the limits

    Tell customers that tariffs and prices change and that savings are estimates.

  4. Match the controls

    Once they choose, set the schedule to match and record it.

  5. Review

    Check the schedule against the first bills and adjust if needed.

For the cost comparison itself, use the method in explaining heat pump running costs honestly. Tariff advice and running cost estimates should always use the same assumptions.

Frequently asked questions

Does a heat pump need a special tariff?

No. It works on any tariff, but a time-of-use or heat pump tariff can lower costs if the controls are set to use cheaper periods.

Do I need a smart meter for a time-of-use tariff?

Yes, the meter must record when electricity is used. Government is rolling out smart meters so households can access flexible tariffs.

Should I recommend a supplier to customers?

Avoid it. Explain tariff types and trade-offs and let the customer compare current offers.

Is it worth removing the gas supply after a heat pump install?

If gas is no longer used for anything, removing it saves the daily gas standing charge, which was 29.68p under the October to December 2026 cap.

References

  1. Department for Energy Security and Net Zero (GOV.UK) (2026). Warm Homes Plan (opens in a new tab) ↑

  2. Ofgem (2026). Energy price cap unit rates and standing charges (opens in a new tab) ↑

  3. Heating and Hotwater Industry Council (HHIC) (2026). HHIC and OFTEC urge Government to back hybrid heating systems to support off-grid households (opens in a new tab) ↑

  4. Office for National Statistics (2020). Internet access - households and individuals, Great Britain: 2020 (opens in a new tab) ↑

  5. Office for National Statistics (2020). Internet access - households and individuals, Great Britain: 2020 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo