Heat pumps low carbon

Answering common heat pump objections

Honest answers to the heat pump objections UK customers raise about cold weather, radiators, noise and cost, with scripts and the evidence to show.

Ava research teamPublished 7 min read

On this page
  1. Why objections deserve a proper answer
  2. A four-step method for any objection
  3. They don't work when it's cold
  4. I'll need to replace all my radiators
  5. They're noisy
  6. It costs too much
  7. My bills will go up
  8. Nobody round here has one
  9. What to send after the visit
  10. Keep a record of the objections you hear
  11. Frequently asked questions
  12. References

Key takeaways

  • Most objections are reasonable questions about design, not myths to be dismissed; treat them as a request for evidence about this house.
  • The median installed cost of an air-to-water heat pump under the Boiler Upgrade Scheme was £12,826 in mid-2026, including the £7,500 grant[1][2].
  • After inflation, that median cost was 14% lower than in 2022[1], a useful answer to the idea that prices only go up.
  • Never promise savings. Show a running cost estimate with the assumptions written down: tariff, previous fuel, flow temperature and expected efficiency.
  • End every objection conversation with a concrete next step: a heat loss survey, a visit to a working install or a written comparison.

Why objections deserve a proper answer

Heat pumps are still unfamiliar to most households. At the 2021 Census only 0.9% of households with central heating in England and Wales used any renewable energy source[3]. Customers arrive with things they have read or heard from a neighbour, and many of those stories come from real installations that were badly designed. If you brush the concern aside, the customer hears a salesperson. If you explain what causes the problem and how your design avoids it, they hear an engineer.

The aim is not to win every argument. Some homes and some customers are better served by a new boiler for now, or by a hybrid, and saying so builds the trust that brings them back later. The aim is to make sure nobody turns down a good heat pump job because of a misunderstanding you could have cleared up in ten minutes.

A four-step method for any objection

  1. Acknowledge the concern

    Repeat it back in their words. 'You've heard they struggle when it's freezing and you don't want to be cold in January.' This shows you listened and stops the conversation turning into a debate.

  2. Explain the cause

    Say what makes the bad outcome happen: undersized units, high flow temperatures, small radiators, poor controls, no heat loss survey.

  3. Show the evidence for this house

    Point to your room-by-room heat loss, the emitter schedule, the noise assessment or the running cost sheet. Evidence specific to their home beats general reassurance.

  4. Agree a next step

    Offer a survey, a visit to a working install, a written comparison against a new boiler or time to think. Write down what you agreed.

They don't work when it's cold

What's behind it: stories of homes that were cold in a frost, or of heat pumps that ran constantly and still could not keep up. The usual cause is a unit sized without a proper heat loss calculation, or emitters that cannot deliver enough heat at the flow temperature chosen.

Script: 'A heat pump keeps working well below freezing, but it has to be designed for the coldest days at your address, not an average day. I'll calculate the heat loss of every room, size the unit and the radiators for that cold day, and show you the numbers before you decide.'

Then do exactly that. Hand over the design temperatures you used, the heat loss per room and the output of each emitter at the design flow temperature. If any room falls short, say so and show what you would change.

I'll need to replace all my radiators

What's behind it: fear of disruption, mess and cost. Some radiators usually need changing because a heat pump runs at a lower flow temperature, which reduces each radiator's output. But the room-by-room calculation often shows that only some rooms need bigger emitters.

Script: 'Some may need to be bigger, but not necessarily all. Once I've done the heat loss, I'll mark each radiator as keep, upsize or replace, so you can see exactly what changes and where.'

A marked-up floor plan with keep, upsize and replace is one of the most persuasive documents you can leave behind. It turns an unknown into a list.

They're noisy

What's behind it: a neighbour's unit that hums, or worry about planning complaints. Noise depends on the model, where it is placed and what surfaces are around it. Defrost cycles and fans running at full speed in cold weather are the moments people notice.

Script: 'Modern units are much quieter than older ones, but placement matters. I'll show you where it would go, how far it is from your windows and your neighbour's, and the noise calculation for that spot. If there's a better location, we'll use it.'

Offer to take them to hear a unit running if you have a willing past customer nearby. Two minutes standing next to one does more than any brochure figure.

It costs too much

What's behind it: a quote that looks large next to a boiler swap. Use real data. The median installed cost of an air-to-water heat pump under the Boiler Upgrade Scheme was £12,826 in July to September 2026, and £34,630 for a ground source system, both including the grant[1]. With the £7,500 grant for an air source heat pump[2], the customer's share on that median would be around £5,300. After inflation, the median air source cost was 14% lower than in 2022[1].

Median installed cost under the Boiler Upgrade Scheme, July to September 2026Includes the grant; England and Wales
Median installed cost under the Boiler Upgrade Scheme, July to September 2026Comparison. Air-to-water heat pump: £12,826; Ground source heat pump: £34,630.£12,826Air-to-water heat pumpAir-to-water heat pump: £12,826£34,630Ground source heat pumpGround source heat pump: £34,630Median installed cost under the Boiler Upgrade Scheme, July to September 2026Comparison. Air-to-water heat pump: £12,826; Ground source heat pump: £34,630.£12,826Air-to-water heat pumpAir-to-water heat pump: £12,826£34,630Ground source heat pumpGround source heat pump: £34,630

Source: Department for Energy Security and Net Zero, 2026[1]

Show the data
ItemValue
Air-to-water heat pump£12,826
Ground source heat pump£34,630

Script: 'Your quote is in line with what's being installed through the grant scheme. Here's what's included, here's what a like-for-like boiler would cost, and here's the difference after the grant. Let's look at the running costs before you decide.' Then give them a written comparison rather than a verbal one.

My bills will go up

What's behind it: the price of electricity compared with gas, and reports of high bills. This is the objection where honesty matters most. Running costs depend on the tariff, the previous fuel, how efficiently the system runs and how the household heats the home.

Script: 'I won't promise you'll save money, because that depends on your tariff and how you use the heating. What I'll do is show you an estimate with every assumption written down, so you can check it, and I'll set the system up to run efficiently from day one.'

Never put a savings promise in writing. Put the assumptions in writing instead: annual heat demand, efficiency, unit price of electricity and the old fuel, and standing charges.

Nobody round here has one

What's behind it: not wanting to be first. The numbers say otherwise. Almost 100,000 hydronic heat pumps were sold in the UK in 2024[4], and 96,611 Boiler Upgrade Scheme installations had been paid out by the end of September 2026[1]. Grant installations are split almost evenly between urban and rural homes, and 61% were in properties on the gas grid[1], so this is not only an off-grid product.

Script: 'They're more common than you'd think, including in homes like yours on mains gas. I can show you one we've fitted nearby, and you can ask the owner how they've found it.'

What to send after the visit

Objections rarely end on the doorstep. Most customers talk it over with a partner, a relative or a neighbour after you leave, and they repeat whatever stuck. Send a short written follow-up within a day so the version they repeat is yours.

  1. One line restating what they told you matters most, for example a warm bathroom in the morning or a lower oil bill.
  2. Each objection they raised, with the answer you gave and the document that backs it up attached.
  3. The heat loss summary and the radiator plan, even if the quote is not ready yet.
  4. A clear next step with a date: survey booked, quote by Friday or a call next week.
  5. An open invitation to ask more questions, by phone or email, before they decide.

Keep it plain and short. A follow-up that reads like a brochure undoes the trust you built by answering questions honestly in person.

Keep a record of the objections you hear

Example objection log used to brief new surveyors.
ObjectionEvidence to leave behindAvoid saying
Cold weatherRoom-by-room heat loss and design temperatureThey work fine in any weather
RadiatorsFloor plan marked keep, upsize or replaceYou won't notice any difference
NoiseProposed location and noise calculationYou'll never hear it
CostWritten comparison with a boiler, grant shown separatelyIt pays for itself
BillsRunning cost estimate with assumptionsYou'll definitely save
Nobody has oneA local install and owner willing to talkEveryone's getting them

Note every objection on the enquiry record, with what you showed and what happened next. After a season you will see which ones you answer well and which ones lose jobs. Feed that into your survey pack, your website FAQ and the follow-up you send after a visit. Our guides to heat pump aftercare and performance monitoring give you the evidence that answers the next customer's questions.

Frequently asked questions

Do heat pumps work in freezing weather?

Yes, if the system is designed for the coldest days at that address. Problems in cold weather usually come from undersized units or emitters that cannot deliver enough heat at the chosen flow temperature.

How much does a heat pump cost to install?

The median installed cost of an air-to-water heat pump under the Boiler Upgrade Scheme was £12,826 in July to September 2026, including the grant[1]. Your quote depends on the house, the emitters and the cylinder.

Will I have to replace every radiator?

Not necessarily. A room-by-room heat loss calculation shows which radiators can stay, which need upsizing and which must be replaced.

Should installers promise lower bills?

No. Running costs depend on the tariff, previous fuel and how the system is used. Give a written estimate with the assumptions shown instead of a promise.

References

  1. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

  2. GOV.UK (2026). Apply for the Boiler Upgrade Scheme: what you can get (opens in a new tab) ↑

  3. Office for National Statistics (2021). Housing, England and Wales: Census 2021 (opens in a new tab) ↑

  4. Heating and Hotwater Industry Council (HHIC) (2024). Bumper year for UK heat pumps (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo