Key takeaways
- Domestic work usually pays faster and at better margins per hour; commercial and contract work brings volume, longer relationships and slower cash.
- Most plumbing firms are small: the largest turnover group, about 41%, sits between £100,000 and £249,000[1].
- Late payment is the top obstacle for construction SMEs, so every step into contract work needs a cash plan[2].
- Domestic customers have consumer rights such as a 14-day cancellation period for off-premises and distance contracts[3].
- Keep any single client below a share of turnover you could lose without laying anyone off.
Three kinds of work, three different businesses
Plumbing and heating firms tend to describe their work as domestic or commercial, but there are really three types with different economics: domestic work for homeowners and small landlords, commercial maintenance for businesses and public bodies, and contract work for main contractors and developers. A firm's mix of the three shapes its margin, its cash flow, its admin load and how badly a single lost client would hurt.
| Factor | Domestic | Commercial maintenance | Contract and new build |
|---|---|---|---|
| Typical payment | On completion or soon after | 30 days or more after invoice | Monthly valuations, stage payments, retentions |
| Margin per hour | Usually highest | Moderate, depends on rate card | Often lowest, depends on visits per plot |
| Marketing cost | Ongoing, per customer | Lower once on approved lists | Low, but tendering takes time |
| Admin load | Light per job | Heavy: portals, reports, KPIs | Heavy: applications, notices, RAMS |
| Seasonality | Strong winter peak for heating | Steadier, with planned visits | Follows housing and building markets |
| Legal framework | Consumer law | Commercial contract terms | Construction Act payment rules |
| Concentration risk | Low: many small customers | Medium: few larger clients | High: one or two main contractors |
None of these is better in general. A two-engineer firm with a strong local reputation can do very well on domestic work alone. A twelve-engineer firm usually needs some commercial or contract volume to keep everyone busy through the summer.
Where most firms sit today
In 2026, 19,630 UK plumbing and heating enterprises, about 41% and the largest turnover group, had annual turnover of £100,000 to £249,000[1]. Only 1,880 turned over £2 million or more[4]. Firms in the larger bands often carry significant commercial or contract work, because that is where single contracts are big enough to support larger teams.
Profitability across construction is reasonably healthy: 80% of construction SME employers made a profit or surplus in their last financial year in the 2025 survey[5]. The question for a plumbing firm is less whether it can be profitable and more which mix of work keeps it profitable with the least stress on cash and people.
Margin: per hour, not per job
Compare work types on earnings per engineer hour, including travel, waiting and admin, rather than on the price of a job. A domestic boiler repair may look small, but it is often finished in one visit and paid on the day. A commercial work order may carry a bigger invoice but require a portal update, a quote for approval and a second visit. A new-build plot may look generous until return visits double the hours.
Example: a firm takes one month of data. Domestic repairs and servicing earn it the most per engineer hour after travel. Commercial maintenance earns somewhat less per hour, but fills Tuesday to Thursday reliably. New-build plots earn the least per hour because of return visits, though they keep two engineers busy all summer. The owner decides to keep commercial work at its current level, cap new build at one site at a time and spend more on domestic marketing in autumn.
Cash flow: the hidden cost of commercial growth
Domestic customers mostly pay on completion. Commercial clients pay on terms. Contract work pays monthly in arrears, minus CIS deductions and retentions. Each shift towards commercial and contract work increases the money you have tied up in work done but not yet paid for.
Late payment makes that worse. 45% of construction SME employers named late payment as a major obstacle in 2025, up from 36% in 2024[2]. You can charge statutory interest of 8% plus the Bank of England base rate on late business-to-business payments[6], but interest does not pay wages this Friday. Before taking on a contract, work out how many weeks of labour and materials you will fund before the first payment arrives, and make sure your overdraft or reserves cover it.
A useful rule: do not let money owed to you by business clients exceed what you could survive losing if your biggest debtor failed.
Risk: concentration and contract terms
- Concentration: if one main contractor, FM company or network supplies most of your work, its decisions become your decisions. Watch any client above a fifth of turnover closely.
- Contract terms: commercial and contract work bring set-off, liquidated damages and indemnities that domestic work does not.
- Insolvency: a failed main contractor can leave you with unpaid valuations and retentions. Check credit before you sign and keep valuations current.
- Consumer law: domestic work has its own risks. For off-premises and distance contracts, the consumer's cancellation period ends 14 days after the contract is made[3], and you should not start within that period unless the customer expressly asks.
Seasonality: how mix smooths the year
Heating work is strongly seasonal. UK household gas demand in the first quarter of 2026 was more than five times the level of the third quarter of 2025[7], and domestic breakdown calls follow the same curve. Commercial planned maintenance and new-build programmes can fill the quieter months, provided they do not crowd out domestic customers in winter, when they are most valuable.
Plan your mix by season, not just by year. One workable pattern is to schedule commercial servicing and new-build work for late spring to early autumn and keep winter capacity for breakdowns, service plan customers and emergency call-outs.
What changes in the office
The biggest surprise for owners who add commercial or contract work is rarely on site. It is in the office. Domestic jobs need a quote, a booking, an invoice and a review request. Commercial and contract work adds purchase orders, client portals, monthly reports, payment applications, CIS statements, retention tracking, accreditation renewals and insurance certificates that must be uploaded before they expire.
- Someone has to own credit control: chasing invoices, checking payment notices and tracking money owed by each client.
- Someone has to own compliance: renewals, policies, risk assessments and onboarding packs for new clients.
- Someone has to own reporting: KPI reports, job evidence and monthly summaries clients pass up their own chain.
- Engineers must close jobs properly on site, with photos and notes, or the office cannot report or invoice.
In a small firm these roles often fall on the owner in the evenings. Before shifting the mix, decide who will do this work and how many hours it will take. If the answer is nobody, the extra turnover will cost more than it earns.
Three model mixes
| Model | Shape | Strengths | Weak points |
|---|---|---|---|
| Domestic-led | Mostly homeowners and small landlords, a few commercial clients | Fast cash, high margin per hour, low concentration risk | Summer lull, high marketing effort |
| Balanced | Domestic core plus planned commercial maintenance | Smoother year, steady weekday diary, recurring income | More admin, slower cash on the commercial side |
| Contract-led | Mostly main contractor or developer packages | Volume, large teams, predictable programmes | Thin margins, retentions, high concentration risk |
Use the model as a direction, not a target. A firm moving from domestic-led to balanced might aim to add two or three commercial maintenance clients over a year, rather than take one large contract that changes everything overnight.
Questions to ask before changing your mix
- What do we earn per engineer hour on each type of work today, after travel and admin?
- How many weeks of wages and materials can we fund before a new client's first payment?
- Which clients would we drop or reduce if the diary filled up, and how would we tell them?
- Do our engineers want the work? Some prefer the variety of domestic jobs; others like the routine of planned maintenance.
- What would happen to the business if our largest client left with one month's notice?
- Does the new work fit the hours we want to keep, including nights, weekends and travel?
Write the answers down and revisit them in six months. The right mix changes as the firm grows, as engineers gain or lose skills and as local demand shifts, so treat it as a decision you review rather than one you make once.
Shifting your mix deliberately
Measure what you have
Split the last twelve months of turnover by work type and client, and calculate earnings per engineer hour for each.
Decide the direction
Choose whether to add commercial maintenance, reduce contract work, or grow domestic, based on margin, cash and the kind of firm you want to run.
Set limits
Write down a maximum share for any single client and a maximum level of money owed by business clients.
Build the capability
Commercial work needs accreditations, reporting and rate cards; domestic growth needs marketing, reviews and fast call handling.
Review each quarter
Check mix, margins and debtor days every three months and adjust before problems compound.
For the commercial side, start with finding commercial plumbing and heating clients. For contract work, read payment terms with main contractors and Construction Act payment rules and adjudication. For pricing, see pricing commercial plumbing work.
Frequently asked questions
Is commercial plumbing more profitable than domestic?
Not automatically. Domestic work often earns more per engineer hour and pays faster, while commercial work brings steadier volume. Compare earnings per hour including travel and admin, not job values.
How much of my work should come from one client?
Set your own ceiling based on what you could lose without laying people off. One rule of thumb is to keep any single client well below a fifth of turnover and watch anyone above that.
Does the Construction Act apply to domestic jobs?
Contracts with homeowners for work on their own homes are excluded from its payment and adjudication rules. Consumer law applies instead.
When is the best time to take on contract work?
When you have spare capacity outside the winter peak and enough cash to fund several weeks of labour and materials before the first payment arrives.
References
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and turnover size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2013). The Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013, regulation 30 (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and turnover size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑
GOV.UK (2026). Late commercial payments: charging interest (opens in a new tab) ↑
Department for Energy Security and Net Zero (2026). Energy Trends: UK gas, ET 4.1 natural gas supply and consumption (quarterly), September 2026 (opens in a new tab) ↑