Key takeaways
- Communal heating in a block is a heat network, and Ofgem became its regulator on 27 January 2026[1].
- Existing operators and suppliers must register with Ofgem by 26 January 2027, which will push them to tighten maintenance records[2].
- Heat cost allocators can no longer be used to show compliance with the duty to install meters in Great Britain[1].
- Know who instructs you, who pays and who must be told: freeholder, managing agent, residents' company, leaseholders and tenants.
- A plant room failure affects every flat at once, so planned maintenance and an outage plan matter more than in a single home.
Communal heating is a heat network
Many blocks of flats, especially newer developments and social housing, heat every flat from a central plant room rather than individual boilers. Water heated by communal boilers, or increasingly by heat pumps or a combined heat and power unit, circulates to each flat, where a heat interface unit provides space heating and hot water. Government guidance defines heat networks as systems in which heating, cooling or hot water is generated at a central source[1], which covers a communal system inside one building as well as a district scheme serving many.
For heating contractors this is specialist but steady work. The plant room has boilers, pumps, pressurisation units, plate heat exchangers, water treatment and controls, and every flat has an interface unit that can fail. Residents feel faults quickly and complain to whoever manages the building, so response and communication matter as much as technical skill.
The new regulatory picture
Ofgem took on the role of heat network regulator in Great Britain on 27 January 2026[1]. Operators and suppliers of existing heat networks must register with Ofgem by 26 January 2027, giving details of their organisation, ownership, financial resilience and consumer protection arrangements, and must follow Ofgem's authorisation conditions[2]. Any business with a supply role must also register with the Energy Ombudsman's heat network supplier scheme[2].
Contractors are not the regulated party, but the people who instruct you are. Expect managing agents and housing providers to ask for clearer maintenance records, fault logs, response times and evidence of how outages were handled, because they will need to show the regulator and residents that the network is properly run. Firms that can produce that evidence will be preferred.
Ask each client who the heat network operator and supplier are for the building. It may be the freeholder, a managing agent, a residents' company or a separate energy services company, and it decides who signs off your work.
Metering and billing work
The Heat Networks (Metering and Billing) Regulations have required metering where viable since 2014. In Great Britain, heat cost allocators can no longer be used to demonstrate compliance with the obligation to install meters, and suppliers no longer have to send notifications to the old regulations authority[1]. Government guidance cites European Commission research that installing heat meters and other control devices could save up to 20% of the energy used[1].
For plumbers and heating engineers this creates work: fitting and replacing heat meters in interface units, checking meter accuracy when residents dispute bills, and repairing the valves and sensors that meters rely on. Agree with the client who reads meters and who handles billing queries, so your engineers are not asked to explain bills on the doorstep.
Who is who in a block of flats
| Party | Role in communal heating | What they want from you |
|---|---|---|
| Freeholder | Owns the building and usually the plant | Assets kept in good order, insurance conditions met |
| Managing agent | Runs the building day to day for the freeholder or residents | Fast response, clear reports, costs that can be justified in service charges |
| Residents' management or right-to-manage company | Resident-led company that may control management | Transparency, value for money, consultation |
| Leaseholders | Pay service charges that fund maintenance | Reliable heat and hot water, fair bills, notice of works |
| Tenants of leaseholders or social landlords | Live in the flats | Heat and hot water, access arranged politely, short outages |
| Heat network operator or supplier | Regulated party for the network | Records and performance that meet Ofgem's conditions |
Major works in leasehold blocks, such as replacing communal boilers, can trigger statutory consultation with leaseholders under section 20 of the Landlord and Tenant Act 1985. That adds time before work can start. Give managing agents clear specifications and itemised quotes early so that the consultation can run while you plan the job.
Running maintenance in the plant room
Gas plant needs competent engineers: by law, only businesses in the HSE-approved class, in practice the Gas Safe Register, may work on gas fittings[3], and communal plant usually needs commercial gas categories. Where the landlord rents out flats, each gas appliance and flue must be checked for safety at intervals of not more than 12 months[4], and that duty can extend to communal boilers serving those flats.
- Boilers or heat pumps: service, combustion analysis and safety checks; check cascade controls and sequencing.
- Pumps and pressurisation: check duty and standby pumps alternate, test pressure and expansion vessel charge.
- Water treatment: test inhibitor levels and water quality; poor water is a common cause of heat interface unit failures.
- Plate heat exchangers and interface units: check approach temperatures and clean strainers.
- Hot water: where water is stored centrally, include legionella monitoring tasks; see legionella control in commercial buildings.
- Controls and alarms: test remote alarms so failures reach the on-call engineer, not just a resident.
Mains gas still dominates, but plant is changing
Mains gas was the central heating type for 73.8% of households in England and Wales at the 2021 Census[5], and many existing communal plant rooms are gas fired. Newer blocks increasingly use heat pumps or hybrid plant, which brings different maintenance skills, refrigerant rules and lower flow temperatures that interface units must be set up for.
- Mains gas central heating 73.8%
Source: Office for National Statistics, 2021[5]
Show the data
| Item | Value |
|---|---|
| Mains gas central heating | 73.8% |
Getting into resident flats
Plant room work needs a key. Interface unit work needs a resident to open the door, and that is where communal jobs lose most time. A planned visit to clean strainers in forty flats can take a week if access is left to chance, or two days if it is organised.
- Ask the managing agent to send a notice at least two weeks ahead with dates, time windows and a contact number for changes.
- Offer a choice of morning or afternoon slots, and a short evening session for residents who work.
- Keep a simple access log: flat number, date, outcome, next attempt. Agents need it to chase non-access.
- Agree how keys held by the agent or a concierge may be used, and record every use.
- Carry ID, wear shoe covers and explain briefly what you are doing and how long it will take.
Residents often use the visit to raise other issues: a noisy pump, a radiator that never gets hot, a confusing heating controller. Note them on the access log and pass them on. Five minutes spent showing a resident how their controller works can prevent a call-out next month, and it is the kind of service that managing agents notice in their complaint figures.
Where flats are let by a housing provider, coordinate through its repairs team rather than contacting tenants directly unless you have been asked to, and follow its rules on vulnerable residents and safeguarding.
Planning for an outage
Agree priorities in advance
With the managing agent, agree that total loss of heating or hot water to the block is an emergency, and set target times for attendance and temporary measures.
Keep spares for critical parts
Pumps, pressurisation unit parts, boiler fans and sensors should be on site or on the van; waiting days for a pump can leave a block without heat.
Notify residents quickly
Agree who sends notices to residents, by what channels and with what update times. Vulnerable residents may need temporary heaters.
Restore in stages
Get one boiler or the hot water circuit running first, then restore full service. Report each stage.
Review afterwards
Write a short report on cause, response and prevention. Operators will need it for their own records.
Example: complaints from one riser
Example: a managing agent receives complaints that flats on one riser of a 48-flat block take a long time to get hot water. The heating firm checks the plant room and finds flow temperatures normal. In two of the affected flats, the interface unit strainers are partly blocked with sludge and one riser balancing valve has been closed during earlier works. The engineer cleans the strainers, resets the valve, tests the system water and finds inhibitor levels low. The report recommends a water treatment programme and strainer cleaning for every interface unit at the next planned visit, which the agent approves for the whole block.
Is communal heating work for you?
- Good fit if your engineers hold commercial gas categories and like diagnosing whole systems.
- Good fit if you can provide reliable out-of-hours cover for the blocks you take on.
- Think carefully if you have no experience with interface units, water treatment and plant controls; partner or train first.
- Think carefully about access: resident flats, key holding and notices take real office time.
Communal work often comes through developers and main contractors at first; see working for housebuilders and payment terms with main contractors. For engineers working among residents, see DBS checks for engineers.
Frequently asked questions
Is a communal boiler in a block of flats a heat network?
Yes. Government guidance defines heat networks as systems where heating, cooling or hot water is generated at a central source, which includes communal systems serving flats in one building.
Who regulates heat networks now?
Ofgem became the heat network regulator in Great Britain on 27 January 2026. Existing operators and suppliers must register by 26 January 2027.
Do heating contractors need to register with Ofgem?
The registration duty falls on heat network operators and suppliers, not on contractors who maintain the plant. Your clients will, however, expect records that help them meet their obligations.
What is a heat interface unit?
A unit in each flat that takes heat from the communal system through a plate heat exchanger and controls heating and hot water for that flat. Many include a heat meter.
References
Department for Energy Security and Net Zero (GOV.UK) (2026). Heat networks (metering and billing) regulations: guidance (opens in a new tab) ↑
Ofgem (2026). Heat networks (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑
Office for National Statistics (2021). Housing, England and Wales: Census 2021 (opens in a new tab) ↑