Key takeaways
- Putting anything into a public sewer that is likely to interfere with the free flow of its contents is an offence under the Water Industry Act 1991[1].
- Choose between under-sink traps, below-ground separators and automatic removal units based on the kitchen's output, space and staff habits.
- Grease equipment only works if it is emptied and maintained on a schedule, with waste taken away by a registered carrier.
- Some installations need notifying to the water company before work starts[2].
- Hospitality clients can pay slowly; late payment affected 63% of SME employers giving trade credit in 2025[3].
Why grease is a plumbing problem and a legal one
Fats, oils and grease, usually shortened to FOG, leave a commercial kitchen as hot liquid in washing-up water and dishwasher discharge. As the water cools in the drain, the grease sets on pipe walls, binds with food waste and wipes, and narrows the bore until the drain blocks. Inside the building that means smells, slow sinks and floods in the kitchen. In the public sewer it contributes to the large blockages water companies spend heavily to clear.
The law takes this seriously. Under section 111 of the Water Industry Act 1991, no one may throw, empty or pass into a public sewer any matter likely to injure the sewer, to interfere with the free flow of its contents, or to affect the treatment and disposal of its contents[1]. The offence can lead to a fine on summary conviction plus a further daily fine while it continues, and on indictment to imprisonment of up to two years, a fine or both[1].
Water companies may look at nearby food businesses when a sewer blocks. A kitchen with working, maintained grease management and records is in a far stronger position than one without.
Grease management options compared
| Option | How it works | Best suited to | Watch for |
|---|---|---|---|
| Under-sink grease trap | Small chamber that slows water so grease floats and is held back | Cafes and small kitchens with low output | Needs very frequent manual cleaning; neglected traps become a source of smells |
| Below-ground grease separator | Large tank sized to the kitchen's flow, emptied by a waste contractor | Restaurants, hotels, schools, production kitchens | Space, access for emptying vehicles, sizing to standard |
| Automatic grease removal unit | Heated unit that skims grease into a container on a timer | Busy kitchens without space for a below-ground separator | Power supply, regular container emptying and strainer cleaning |
| Biological or enzyme dosing | Products dosed into drains to break grease down | Supplement only, if at all | Some water companies are sceptical, because grease can reform further downstream |
| Kitchen practice | Scraping plates, sink strainers, collecting waste oil | Every kitchen | Needs training and supervision of staff |
No equipment survives bad kitchen habits. The most effective installations come with a short training session for kitchen staff: scrape plates into the food waste bin, never pour fryer oil down the sink, keep strainers in place and tell the manager when a sink slows.
Sizing and installing grease equipment
Grease separators are sized from the kitchen's peak flow and the type of food it produces, usually following the European standard for grease separators, BS EN 1825. Ask for the number and type of sinks, dishwashers, combination ovens, floor gullies and pot wash areas that will connect, plus the number of meals served at peak. Undersized equipment fills and passes grease within days.
- Connect only the outlets that discharge grease. Toilets and surface water should not go through a separator.
- Allow access for emptying: a below-ground separator needs a route for a tanker hose and a safe manhole position.
- Check discharge temperatures from dishwashers, since very hot water can carry grease straight through.
- Install sampling and inspection points so that the water company or the client can check performance.
- Fit or keep sink strainers and a food waste route so solids are kept out.
Check notifications before you start. Anyone planning to install certain water fittings must notify the water undertaker and must not begin without its consent[2]. Drainage alterations may also fall under building regulations: GOV.UK lists bathrooms involving plumbing and new or replacement heating systems among work that can need approval in England[4], and new drainage connections and separators often need building control involvement too.
Service work: where the steady income is
Installing a separator is a one-off job. Looking after it is recurring work. A kitchen drainage service contract usually combines several visits a year to inspect and clean traps and units, coordinate or carry out separator emptying, jet the kitchen drain runs and check that the equipment matches the kitchen's current output.
Inspect
Lift covers, check grease depth against the unit's capacity, look for solids, check inlet and outlet pipework and smell for signs of bypassing.
Clean or empty
Clean under-sink traps and grease removal unit strainers, or arrange emptying of below-ground separators by a registered waste carrier.
Jet the runs
Jet the kitchen branch drains and inspection chambers to the point where they meet the main drain, and camera-survey any run that keeps blocking.
Record
Note grease levels, actions, waste quantities removed and the waste transfer note reference. Photograph before and after.
Advise
Tell the kitchen manager what you found, in plain terms, and recommend changes in practice or equipment where the same problem keeps appearing.
Grease waste is controlled waste. Whoever takes it away must be a registered waste carrier, and the client should keep the waste transfer notes. Keep them with the service log, because they are the first thing to show if a water company asks how grease is managed.
Diagnosing a kitchen that keeps blocking
Repeat blockages are the clearest sign that a kitchen's grease management has failed, and they are where a plumbing firm can add the most value. Jetting clears the symptom; working out why it keeps happening wins the account. Work through the questions in order.
- Where exactly does the blockage form? Camera-survey the run and note the distance from each sink, appliance and chamber.
- Which outlets drain into that run, and do any of them bypass the grease equipment?
- Is the grease equipment the right size for what the kitchen now produces? Menus and opening hours change; equipment often does not.
- When was it last emptied or cleaned, and what level of grease was found?
- Is the run laid to a proper fall, or does it have sags, back falls or poorly made joints where grease collects?
- What are kitchen staff actually doing at the sink? A short conversation during a busy service often tells you more than the drawings.
Write the findings up in a one-page report with photos and a clear recommendation: practice changes, equipment changes, drainage repairs or a service schedule, with prices for each. Kitchen managers rarely have time for long reports, but they will forward a short, clear one to the owner or area manager who signs off spending.
Keep a copy of the camera footage. If the same run blocks again after the recommended changes, comparing the two surveys shows quickly whether the cause is the drain itself or what goes into it.
Example: a restaurant with repeat blockages
Example: a 90-cover restaurant calls a plumbing firm three times in two months for a blocked kitchen drain. Each time the firm jets the line and leaves. On the third visit the engineer camera-surveys the run and finds heavy grease build-up from a pot wash sink that bypasses the under-sink trap, and a trap that is far too small for the kitchen's output. The firm writes a short report, recommends an automatic grease removal unit on the pot wash and a quarterly drainage service, and trains the kitchen team on scraping and strainers. Blockage call-outs stop, and the restaurant now pays for four planned visits a year instead of emergency attendances.
Working in commercial kitchens safely
- Book work outside service hours, and agree with the manager which areas will be out of use.
- Follow food hygiene rules: protect food preparation surfaces, wear clean overalls and wash hands before handling anything in the kitchen.
- Watch for hot surfaces, fryers and steam even when the kitchen is closed.
- Isolate gas appliances only with the site's agreement and record what you isolated.
- Clean up thoroughly and disinfect any area that drain waste reached.
Kitchens with gas cooking also need competent gas engineers for appliance work, and many have extraction and interlock systems that sit alongside the plumbing. If you work in schools as well as restaurants, see plumbing in schools and care homes for site rules and DBS checks for engineers.
Contracts, pricing and getting paid
Price kitchen drainage work as a schedule: a fixed price per planned visit covering inspection, cleaning and reporting, a separate price for separator emptying, and rates for reactive jetting and camera surveys. Hospitality businesses can be under cash pressure, so agree payment terms and an account limit before you start. Late payment was a problem for 63% of UK SME employers that gave trade credit in 2025[3].
- Had a late payment problem 63%
Source: Department for Business and Trade (GOV.UK), 2025[3]
Show the data
| Item | Value |
|---|---|
| Had a late payment problem | 63% |
If an account falls behind, remember that businesses can charge statutory interest of 8% plus the Bank of England base rate on late business-to-business payments[5]. A polite reminder that you will apply it often brings payment forward. For blocked drains outside commercial kitchens, see what counts as a blocked drain emergency, and for larger developments, working for housebuilders.
Frequently asked questions
Is a grease trap a legal requirement for restaurants?
There is no single rule requiring one specific device, but putting matter into a public sewer that is likely to interfere with its free flow is an offence under the Water Industry Act. In practice most food businesses need grease management to avoid that risk, and new kitchens are often asked for it at planning or building control stage.
How often should a grease trap be cleaned?
It depends on the kitchen's output and the trap's size. Small under-sink traps may need cleaning very frequently, while separators are emptied on a schedule set by grease levels. Start with frequent inspections and adjust based on what you find.
Can I dispose of grease waste myself?
Only if you are a registered waste carrier. Otherwise arrange collection with a registered carrier and give the client the waste transfer note.
Do enzyme dosing products solve grease problems?
They can help in some systems, but some water companies are sceptical because grease may reform further downstream. Treat dosing as a supplement to physical grease management, not a replacement.
References
legislation.gov.uk (The National Archives) (1991). Water Industry Act 1991, section 111: restrictions on use of public sewers (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1999). The Water Supply (Water Fittings) Regulations 1999, regulation 5 (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑
GOV.UK (2026). Building regulations approval (opens in a new tab) ↑
GOV.UK (2026). Late commercial payments: charging interest (opens in a new tab) ↑