Key takeaways
- A planned autumn visit costs far less than a winter emergency, and rented homes carry more risk: 22% of private rented homes in England fail the Decent Homes Standard[1].
- Rank the portfolio by risk first: boiler age, past breakdowns, vulnerable tenants, empty periods and exposed pipework.
- Combine the visit with the annual gas safety check where the timing works[2], so tenants give access once.
- Check carbon monoxide alarms on every visit; only 62% of homes in England had one in 2024[3].
- Give the landlord a one-page report per property with photos and a clear list of what must be fixed before winter.
Why autumn visits pay for themselves
For a landlord with a dozen or more homes, winter means a stream of calls from tenants with no heating, no hot water or a leak. Each one is urgent, often out of hours, and frequently caused by something an engineer could have spotted in October: a failing pump, a condensate pipe run outside without insulation, a pressure vessel that has lost its charge.
Rented homes carry more of this risk. In 2024, 22% of private rented homes in England failed the Decent Homes Standard, the highest of any tenure, against 10% in the social rented sector[1]. Damp was a problem in 5% of all homes, up from 4% in 2021 and 2022[4]. A pre-winter programme turns a landlord's unpredictable emergency bills into a planned schedule of visits and repairs.
Rank the portfolio before you book
Not every home needs the same visit. Ask the landlord or agent for a list of properties with boiler make and age, the date of the last gas safety check and service, and any repairs in the last two winters. Then rank.
| Risk factor | Why it matters | Priority |
|---|---|---|
| Boiler over ten years old or a history of breakdowns | Most likely to fail on first heavy use | Visit first |
| Tenant at higher risk from cold | Loss of heat is more dangerous and more urgent | Visit first |
| Home empty between lets in winter | Bursts go unnoticed | Visit before the void starts |
| Pipework in lofts, garages or outside walls | Freezing risk | Early |
| Gas safety check due October to January | Combine to save a visit | Book with the check |
| Newer boiler, no recent problems | Lower risk | Later in the programme |
What the visit covers
Agree a fixed checklist with the landlord so every home gets the same visit and the report is easy to compare. A typical pre-winter visit for a gas-heated rental covers the following.
- Gas safety check and record, if due, or a service if the landlord has agreed one.
- Boiler operation, system pressure and the pressure vessel charge on sealed systems.
- Condensate pipe route, insulation and termination, especially where it runs outside.
- Pump, valves and controls: does the heating come on, and do the tenants know how to use the programmer?
- Every radiator heats; bleed and balance if needed.
- Stop tap located, labelled and working; tenants shown where it is.
- Outside taps isolated or protected; exposed pipes lagged.
- Signs of leaks, damp or mould near pipework and appliances.
- Carbon monoxide alarm present, in date and tested.
Show the tenant the stop tap and how to clear a frozen condensate pipe. Five minutes of explanation can save a winter call-out.
Carbon monoxide alarms
In 2024, 62% of homes in England had a carbon monoxide alarm, up from 60% in 2023[3]. Rented homes have specific alarm requirements that differ between England, Wales, Scotland and Northern Ireland, but wherever they are fitted, alarms must meet EN 50291-1:2018[5]. Check the alarm is present where required, positioned sensibly, within its expiry date and working. Record what you found and tell the landlord in writing if one is missing or expired.
Combine with the gas safety check
Landlords must have each gas appliance and flue checked at intervals of no more than 12 months[2] and give existing tenants the record within 28 days[6]. Where a check falls due in autumn or early winter, combining it with the pre-winter visit saves a second access appointment, which with tenants is often the hardest part of the job.
Be clear with landlords about the difference between a gas safety check and a full service. The safety check confirms appliances and flues are safe; it does not include the maintenance a service does. Industry bodies have called for the mandatory annual check in rented homes to become a full service plus a heating efficiency check[7]. Until rules change, it is the landlord's choice, and a pre-winter visit is a good moment to recommend both.
Getting access without wasted trips
August: agree the list
Confirm properties, checklist and who authorises repairs, and up to what value, without a second call.
September: write to tenants
The landlord or agent tells tenants about the visits and why they matter. Offer two or three slots per area.
Confirm by text two days before
Include the engineer's name and a number to call if the slot no longer suits.
Group by postcode
Book properties in the same area on the same day to cut travel and absorb no-access visits.
Record no-access visits
Photograph the door, note the time and inform the landlord the same day, so they can rearrange and keep a record of attempts.
Reporting to the landlord
A good report is short. One page per property, with photos, sorted into three groups: must fix before winter, should fix this year and advice. Avoid long lists of minor observations; landlords act on clear priorities. Send reports within two working days, with a quote for any must-fix items, and follow up a week later on anything not yet approved.
For agents managing many landlords, a portfolio summary helps: number of homes visited, number with must-fix items, number with missing or expired CO alarms, and properties where access failed.
Social housing contracts
If you work for social landlords in England, winter brings strict response times. Awaab's Law requires social landlords to investigate emergency hazards and carry out safety work within 24 hours of becoming aware of them[8]. Pre-winter visits reduce the number of those emergencies and give the landlord evidence that hazards were looked for in advance.
Pricing the programme fairly
Landlords and agents compare quotes for portfolio work closely, so be clear about what each visit includes. Set out the checklist, what happens if a fault is found on the day, how small repairs are authorised and how no-access visits are charged. Agree a repair limit per property that the engineer can approve on the spot, so a failing pump does not need a second trip and a week of emails. Put all of this in a short written agreement before the first visit; it prevents most disputes at invoice time.
Common findings and quick fixes
After a few seasons of pre-winter visits, most firms find the same handful of issues again and again. Carry the parts and materials to fix them on the day where the landlord has authorised it.
- Condensate pipes run outside without insulation or at too shallow a fall.
- Sealed systems losing pressure because the expansion vessel has lost its charge.
- Radiator valves seized after a summer closed.
- Programmers set wrongly or reset after a power cut, leaving tenants with heating at odd hours.
- Missing or expired carbon monoxide alarms.
- Stop taps that will not turn, or that nobody can find.
- Outside taps with no isolating valve.
Record each finding in the same words every time. Over a portfolio, that lets you show the landlord a pattern, such as a model of boiler that keeps failing or a block of flats with the same condensate problem, and propose one fix rather than many call-outs.
Tenants at higher risk
Ask the landlord or agent which tenants have told them they are elderly, disabled, have young children or have a health condition made worse by cold, and visit those homes first. Keep that information only on the job record and only for as long as it is needed. On the visit, make sure those tenants know exactly who to call if the heating fails, and that the number reaches someone out of hours.
Example: a 30-home portfolio
Example (fictional): a letting agent in Nottingham asks a heating firm to visit 30 rented homes before winter. The firm ranks them: eight with boilers over ten years old or previous breakdowns, three with tenants at higher risk from cold, and eleven with gas safety checks due between October and January. Visits are grouped into six area days in October. Twenty-seven homes are accessed first time. The reports show five must-fix items, including a failing pump and two missing CO alarms, all approved and completed by early November. Over the winter the agent logs four heating emergencies across the portfolio, against eleven the year before.
Related reading
For homes that will sit empty, see winterising empty properties and holiday lets. Give tenants the frozen pipe prevention guide, and set up a clear route for winter calls with handling landlord and agent calls.
Frequently asked questions
Is a gas safety check the same as a boiler service?
No. The check confirms appliances and flues are safe; a service includes maintenance. Industry bodies have called for the annual check in rented homes to become a full service[7], but for now landlords choose.
How many properties can an engineer visit in a day?
It depends on travel and the checklist. Grouping homes by postcode and combining visits with gas safety checks makes the most of each day.
What if the tenant does not give access?
Record the attempt with time and a photo, tell the landlord the same day and rebook. Landlords need a record of reasonable attempts.
Should carbon monoxide alarms be checked on every visit?
Yes. Check presence, position, expiry and that it works. Alarms must meet EN 50291-1:2018 wherever they are fitted[5].
References
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2025). A guide to carbon monoxide (CO) alarm legislation for heating engineers (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2025). Call to enhance Gas Safety Checks (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2025). Awaab's Law: Guidance for social landlords - Timeframes for repairs in the social rented sector (opens in a new tab) ↑