Seasonal operations

Preparing for boiler switch-on season

An eight-week countdown for heating firms before the heating goes on: van stock, staff leave, protected breakdown slots and a test-your-heating message.

Ava research teamPublished 7 min read

On this page
  1. Why the first cold week hurts
  2. The eight-week countdown
  3. Stock: plan from your own job history
  4. People: leave, rotas and the office
  5. Diary: protect breakdown capacity
  6. The test-your-heating message
  7. Faults you can sort on the phone
  8. Landlord and agent portfolios
  9. Example: one firm's first cold week
  10. After the rush: learn for next year
  11. Frequently asked questions
  12. References

Key takeaways

  • Household gas use jumps more than fourfold between summer and autumn[1], and your phone follows the same curve.
  • Start eight weeks before the first cold spell: order stock, freeze leave, plan the on-call rota and tell customers to test their heating early.
  • Stock for the boilers you actually see; combination boilers are in about 63% of English homes[2].
  • Hold back a fixed share of each engineer's diary for breakdowns from October and release it only the day before.
  • Book landlord checks and annual services early so they do not collide with the first cold week.

Why the first cold week hurts

Every heating engineer knows the pattern. Boilers sit idle or only heat water through the summer, then one cold weekend in late September or October millions of households turn the heating on at once. Pumps that have stuck, diverter valves that have seized, pressure that has crept down and controls nobody has touched since April all show up within days of each other.

The national figures show the scale. Household gas demand in the UK was 19,636 GWh in July to September 2025 and 88,790 GWh in October to December, more than four times higher, before reaching 109,126 GWh in January to March 2026[1]. Mains gas was the central heating fuel for 73.8% of households in England and Wales at the 2021 Census[3], so for most firms the switch-on is the single biggest swing in demand all year.

UK household gas demand by quarter
UK household gas demand by quarterColumn chart. Apr to Jun 2025: 30,786 GWh; Jul to Sep 2025: 19,636 GWh; Oct to Dec 2025: 88,790 GWh; Jan to Mar 2026: 109,126 GWh.0 GWh50,000 GWh100,000 GWh150,000 GWhApr to Jun 2025: 30,786 GWh30,786 GWhApr to Jun 2025Jul to Sep 2025: 19,636 GWh19,636 GWhJul to Sep 2025Oct to Dec 2025: 88,790 GWh88,790 GWhOct to Dec 2025Jan to Mar 2026: 109,126 GWh109,126 GWhJan to Mar 2026UK household gas demand by quarterColumn chart. Apr to Jun 2025: 30,786 GWh; Jul to Sep 2025: 19,636 GWh; Oct to Dec 2025: 88,790 GWh; Jan to Mar 2026: 109,126 GWh.0 GWh50,000 GWh100,000 GWh150,000 GWhApr to Jun 2025: 30,786 GWh30,786 GWhApr toJun2025Jul to Sep 2025: 19,636 GWh19,636 GWhJul toSep2025Oct to Dec 2025: 88,790 GWh88,790 GWhOct toDec2025Jan to Mar 2026: 109,126 GWh109,126 GWhJan toMar2026

Source: Department for Energy Security and Net Zero, 2026[1]

Show the data
ItemValue
Apr to Jun 202530,786 GWh
Jul to Sep 202519,636 GWh
Oct to Dec 202588,790 GWh
Jan to Mar 2026109,126 GWh

You cannot spread the first cold night across the calendar. What you can do is make sure the work that does not have to happen in October has already been done, and that the work that does has stock, people and diary space waiting for it.

The eight-week countdown

  1. Eight weeks out (early August)

    Review last autumn: which faults came in, which parts ran out, which days the phone was busiest. Set your stock list and leave rules from that, not from memory.

  2. Six weeks out

    Place stock orders with merchants for the parts on your list. Confirm engineers' leave and close the leave calendar for the first three weeks of October.

  3. Four weeks out

    Send the test-your-heating message to customers. Push remaining annual services and landlord checks into September slots.

  4. Two weeks out

    Set the protected breakdown slots in every diary. Brief the office and the on-call engineer on triage questions and the gas emergency script.

  5. First cold week

    Run a daily 15-minute review of calls, parts used and jobs waiting. Release protected slots only the day before they are needed.

Stock: plan from your own job history

Generic stock lists are a poor guide. Pull last year's October and November jobs from your system and count parts used by boiler make. Condensing combination boilers were in 63% of homes in England in 2024, and condensing regular or system boilers in 19%[2], but your area may be very different, especially if you work in older housing or off the gas grid.

Example switch-on stock review: parts that commonly fail after a summer of low use
PartWhy it fails at switch-onStock decision
Circulating pumpsSeize after months without runningCarry the two or three models you fit most
Diverter valves and cartridgesStick in the hot water positionStock for your top three boiler makes
Pressure relief valves and filling loopsPressure drops over summer; customers top up and overpressuriseCarry universal fittings and gauges
Printed circuit boardsFail on first heavy useKnow lead times; order on diagnosis, not on spec
Room thermostats and programmersBatteries flat, settings lostCarry one or two simple replacement units
Magnetic filter seals and inhibitorFound during first-firing visitsCarry plenty; it turns breakdowns into advice

Agree with your merchant which items they can hold for you and which you must keep on the van. A part you can collect at 7.30am is worth less if three other firms are queuing for the same one.

People: leave, rotas and the office

Most firms already block leave around Christmas. Fewer think about October, yet the first cold fortnight is often busier than December. Set a rule early and tell staff in writing: for example, no more than one engineer off at a time from 25 September to 15 October. Workers are entitled to 5.6 weeks' paid holiday a year[4], so blocking October means making sure leave is taken in quieter months, not lost.

  • Put the on-call rota up for October to December now, with a named backup for each week.
  • Brief whoever answers the phone on triage: no heating, no hot water, leak, gas smell, and who is vulnerable.
  • Decide which jobs an apprentice or improver can attend alone and which need a qualified engineer.
  • Agree overtime rates and limits before the rush, so nobody negotiates at 6pm on a Friday.

Diary: protect breakdown capacity

The single most useful change is to stop filling October diaries with planned work. Decide how much of each engineer's day is held for breakdowns, and release that time only when the day before is quiet. Many firms start with a morning or afternoon block per engineer and adjust from there.

Move annual services and landlord gas safety checks into August and September wherever the customer agrees. Landlords must have each gas appliance and flue checked at intervals of no more than 12 months[5], so a check moved earlier this year resets the date for next year too. Do it once and it keeps paying back.

A full October diary looks like success until the first cold night. Then it means telling existing customers you cannot come, or letting down a family with no heat.

The test-your-heating message

Ask customers to fire their heating for half an hour in September, while you still have time to fix what they find. Send it by email or letter to existing customers who have agreed to hear from you; marketing texts and emails need consent unless the soft opt-in for existing customers applies[6].

Example message: Before the cold weather arrives, please turn your heating on for 30 minutes this week. Check that every radiator gets warm, the boiler pressure gauge reads where your manual says it should, and there are no new noises or error codes. If anything is wrong, call us now rather than on the first cold night, when we will be at our busiest. If you ever smell gas, call the gas emergency number straight away.

The NHS advises heating the rooms you use regularly to at least 18°C and having heating appliances checked by a Gas Safe registered engineer[7]. Quoting that guidance gives the message weight without sounding like a sales pitch.

Faults you can sort on the phone

In the first cold week, a share of calls are not breakdowns at all. Clearing them by phone frees visits for customers who really need one. Train whoever answers to ask four questions before booking: is the boiler showing a fault code, what does the pressure gauge read, has the programmer or thermostat been changed or lost power, and is there hot water but no heating, or neither?

  • Programmer reset after a power cut or clock change: talk the customer through the settings.
  • Thermostat batteries flat: replace and test.
  • Heating set to hot water only, or a holiday mode left on since summer.
  • Radiator valves closed over the summer: open them and bleed if the customer is confident.
  • Pressure slightly low on a sealed system: top up only if the customer has done it before and has the manual.

Record every phone fix as a job, even with no charge. It shows you how much capacity the questions saved and gives you a reason to contact that customer about a service later.

Landlord and agent portfolios

If you look after rented homes, contact landlords and letting agents in August with a list of their properties, when each gas safety check is due and which boilers have caused trouble before. Tenants are often the last to report a problem and the first to complain when it is not fixed, and agents juggling hundreds of homes appreciate a firm that plans ahead. Agree access arrangements for the winter now, including who can authorise urgent repairs and up to what value, so an engineer is not stuck on a doorstep waiting for a call back.

Example: one firm's first cold week

Example (fictional): a five-engineer firm in Sheffield reviewed the previous October and found that pumps and diverter valves made up most of its first-fortnight parts, and that it lost two days waiting for boards. This year it stocked pumps and valves on every van, agreed a hold with its merchant for two board models, and kept each engineer's afternoon free for breakdowns from 1 October. When the first cold weekend arrived, it handled the Monday rush without cancelling any planned installs. Two customers who had tested their heating in September had already had their faults fixed.

After the rush: learn for next year

In the second week of November, spend an hour with the numbers. Which parts ran out? Which days had the most calls? How many protected slots went unused? Write three changes for next year and put them in the August diary now. Then read on: winter demand planning covers the months after switch-on, and the cold snap playbook covers the nights when calls jump without warning. For the questions to ask callers with no heat, see triage questions for no-heating calls.

Frequently asked questions

When does boiler switch-on season start in the UK?

Usually with the first cold spell in late September or October. Household gas demand rises more than fourfold from summer to autumn[1], so plan as though the rush will start in the first week of October.

Should we stop booking installs in October?

Not entirely, but avoid booking every engineer onto planned work. Hold a share of each day for breakdowns and release it the day before if it is not needed.

Is it worth sending customers a reminder to test their heating?

Yes. It moves some faults into September, when you have capacity, and it shows customers you are thinking ahead. Send it only to customers who have agreed to hear from you or who fall under the soft opt-in.

What parts should every van carry before winter?

The parts that failed most often in your own jobs last October, typically pumps, diverter valves, pressure relief valves and filling loops for the boiler makes you see most.

References

  1. Department for Energy Security and Net Zero (2026). Energy Trends: UK gas, ET 4.1 natural gas supply and consumption (quarterly), September 2026 (opens in a new tab) ↑

  2. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 2, energy efficiency (opens in a new tab) ↑

  3. Office for National Statistics (2021). Housing, England and Wales: Census 2021 (opens in a new tab) ↑

  4. GOV.UK (2026). Holiday entitlement (opens in a new tab) ↑

  5. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  6. legislation.gov.uk (The National Archives) (2003). The Privacy and Electronic Communications (EC Directive) Regulations 2003, regulation 22 (opens in a new tab) ↑

  7. NHS (2026). Keep warm, keep well (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo