Staffing training

Managed learning programmes for new gas engineers

How managed learning routes take new entrants to their first ACS gas assessments, what the portfolio involves and what a sponsoring employer must do.

Ava research teamPublished 6 min read

On this page
  1. What a managed learning programme is
  2. Why the stakes are high
  3. How the route usually runs
  4. What the sponsoring employer must do
  5. Is hosting a learner right for your firm?
  6. Choosing a programme to support
  7. After assessment: registration and beyond
  8. A worked example
  9. Frequently asked questions
  10. References

Key takeaways

  • A managed learning programme is a structured route for new entrants: centre training, supervised on-site work logged in a portfolio, then ACS assessment.
  • HSE guidance says gas work should only be done after industry-recognised training followed by assessment of competence[1].
  • The sponsoring employer carries real duties: supervision, honest sign-off and making sure the learner never works on gas alone before registration.
  • Demand is steady: mains gas was the central heating type for 73.8% of households in England and Wales in 2021[2].

What a managed learning programme is

Most gas engineers come into the trade through a plumbing apprenticeship followed by gas training. Managed learning programmes are the main alternative for new entrants, often career changers, who want to work on gas without first completing a full plumbing apprenticeship. They are offered by training providers and combine three parts: training at a centre, a period of supervised work on real gas jobs recorded in a portfolio, and initial assessments under the Nationally Accredited Certification Scheme (ACS) at the end.

The structure exists because of how gas competence is defined. HSE guidance says gas work should only be undertaken by a person who has successfully completed an industry-recognised training course followed by assessment of competence, with the training recognised by the industry's standards setting body[1]. A managed learning programme is designed to meet that standard for someone starting from scratch.

For employers, these programmes matter because they need a sponsor. The learner must gain real on-site experience under a registered engineer, and many providers ask the learner to find a firm that will host them. If you agree, you become part of the learner's training, with responsibilities that go beyond simply having an extra pair of hands.

Why the stakes are high

Gas work is one of the few areas of plumbing where the law sets who may do it. No employer or self-employed person may carry out work on a gas fitting unless they belong to an HSE-approved class of persons, which in practice means the Gas Safe Register[3]. And the demand is large: mains gas was the central heating type for 73.8% of households in England and Wales at the 2021 Census[2]. Landlords must have a registered engineer carry out an annual gas safety check on each appliance and flue[4], which creates steady work for qualified engineers and a reason for firms to grow their own.

Households in England and Wales with mains gas central heating, 2021
Households in England and Wales with mains gas central heating, 2021Donut chart. Mains gas central heating: 73.8%.Mains gas central heating: 73.8%73.8%
  • Mains gas central heating 73.8%

Source: Office for National Statistics, 2021[2]

Show the data
ItemValue
Mains gas central heating73.8%

Employers carry their own duty. HSE guidance says employers of gas engineers must make sure their employees have the competence required for the work undertaken, as well as being properly trained and experienced, and that this involves ongoing monitoring of performance[1]. A learner on your jobs is your responsibility.

How the route usually runs

  1. Initial training at a centre

    Gas safety principles, combustion, flues, ventilation, tightness testing and purging, followed by appliance-specific modules on centre rigs. Many programmes also include core plumbing and electrical safety elements.

  2. Portfolio period on site

    The learner works alongside a registered engineer on real jobs, recording evidence of each task: photos, readings, job sheets and the supervising engineer's sign-off. Providers set out which kinds of work must be covered.

  3. Portfolio review

    The provider checks the evidence is complete and genuine before the learner can go forward to assessment.

  4. ACS initial assessment

    Assessments in core gas safety and the appliance categories the learner needs, carried out by an accredited certification body.

  5. Gas Safe registration

    Once assessed, the engineer can be registered, either through their employer's registration or in their own right, for the categories they passed.

Under HSE guidance, assessment and training organisations themselves must be in membership of an HSE-approved class of persons and must make sure their staff are competent[1]. Check that any provider you deal with can show this.

What the sponsoring employer must do

Sponsoring employer responsibilities on a managed learning programme
ResponsibilityWhat it means day to day
SupervisionA registered, competent engineer is with the learner for all gas work and checks every task
Range of workThe learner sees the types of jobs the portfolio needs, not just one appliance type
Honest sign-offThe supervising engineer only signs evidence for work the learner actually did, correctly
SafetyRisk assessment for having a learner on site, and clear rules on what they may not touch
InsuranceEmployers' liability if the learner is employed; confirm cover for a non-employed placement
CommunicationRegular contact with the provider about progress and any concerns

Never let a learner work on gas alone before they are assessed and registered, however confident they seem or however busy the diary is. If something goes wrong, the consequences fall on the learner, the supervising engineer and the business.

Signing portfolio evidence is a serious act. The supervising engineer is confirming that the learner did the work and did it correctly. Pressure to sign quickly so a learner can book their assessment is common, especially if the learner has paid a lot for the course. Resist it. Evidence that is not genuine undermines the whole system and puts customers at risk.

Is hosting a learner right for your firm?

Hosting works best for firms with a steady mix of gas work through the year and a senior engineer who enjoys teaching. It works badly for firms that are flat out and hope the learner will lighten the load, because for the first months a learner slows the supervising engineer down. Be honest about that before agreeing.

  • Do you have enough varied gas work, such as servicing, breakdowns and installs, for the portfolio?
  • Can one engineer be named as supervisor and given time to teach and check?
  • Will the learner be employed by you, or on an unpaid placement, and have you checked the legal and insurance position for each?
  • Do you want to employ them once registered? If not, say so at the start.

If the learner is working for you, they are very likely a worker entitled to at least the minimum wage, even if they describe it as work experience. Take advice before agreeing to an unpaid arrangement, and treat a paid, employed learner as you would any other new starter, with a written statement, payroll and insurance in place from the first day.

Choosing a programme to support

  1. Is the training recognised by the industry's standards setting body, and does it lead to ACS assessment with an accredited certification body?
  2. What does the portfolio require, and how long do learners typically take to complete it?
  3. What support does the provider give employers: guidance on sign-off, visits, a named contact?
  4. What happens if the learner struggles: extra training, extended time, a different route?
  5. How many learners complete and go on to register, and how long after starting?

Be cautious about programmes that promise a fixed short timescale regardless of how quickly the learner gathers evidence, or that pressure employers to sign off quickly. A good provider wants accurate evidence, even if it takes longer.

After assessment: registration and beyond

Once assessed, the new engineer's scope of work is shown on their certificate of competence and their Gas Safe Register details[1]. That scope is usually narrow at first, often domestic boilers and perhaps cookers. Plan with them which further categories to add and when.

Assessment is not a one-off. Certification schemes require individual engineers to have their competence assessed at regular intervals under scheme arrangements, operated by certification bodies accredited by UKAS[1]. Diary the reassessment dates and budget for them; see planning ACS reassessments for the details.

A newly registered engineer is not yet an experienced one. HSE describes competence as a combination of practical skill, training, knowledge and experience[1]. Keep checking their work, give them a range of jobs and pair them with senior engineers on complex faults for the first year.

A worked example

Example: a fictional heating firm in Leicester agrees to host a learner on a managed learning programme, a 29-year-old former electrician. The owner names one senior engineer as supervisor, checks the provider's accreditation and agrees a schedule that covers servicing, breakdowns and boiler swaps. The learner never works on gas alone. The supervisor signs only evidence he witnessed. After the portfolio is accepted, the learner passes his initial assessments, the firm employs him as a newly registered gas engineer and builds a first-year plan to widen his experience.

The firm found the arrangement worked because it was clear about responsibilities from the start, and because the supervising engineer was given time to teach rather than being expected to work at full speed. For related reading, see plumbing qualifications explained, JIB-PMES grading and a CPD plan for your engineers.

Frequently asked questions

What is a managed learning programme for gas?

A structured route for new entrants: centre training, supervised on-site work recorded in a portfolio, then ACS initial assessment before Gas Safe registration.

Can a learner work on gas without supervision?

No. Only registered, competent engineers may work on gas fittings[3]. Learners must be supervised on every gas task until assessed and registered.

What does a sponsoring employer have to do?

Provide supervised, varied gas work, sign evidence honestly, manage safety and insurance, and keep in touch with the provider. Employers must make sure staff have the competence for the work they do[1].

How often are gas engineers reassessed?

At regular intervals set by the certification scheme rules[1]. Check the dates on each engineer's certificate and plan ahead.

References

  1. Health and Safety Executive (2018). L56 Safety in the installation and use of gas systems and appliances (fifth edition) (opens in a new tab) ↑

  2. Office for National Statistics (2021). Housing, England and Wales: Census 2021 (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑

  4. GOV.UK (2026). Your landlord's safety responsibilities (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo