Quotes pricing

Working out your true labour rate as a plumber

Work out a plumber's charge-out rate from target income, overheads and real billable hours, with UK pay benchmarks and a worked Example for sole traders.

Ava research teamPublished 6 min read

On this page
  1. Why your hourly rate is not your wage
  2. Start from what an employee would earn
  3. The calculation, step by step
  4. A worked Example
  5. What eats billable hours
  6. Tax thresholds that change the maths
  7. When you take on your first engineer
  8. From labour rate to the prices you quote
  9. Review the rate twice a year
  10. Frequently asked questions
  11. References

Key takeaways

  • Your charge-out rate must cover your income, every business overhead and the hours you cannot bill, not just your time on the tools.
  • Benchmark your target income against employees: full-time employee plumbers had median gross pay of £39,179 in 2026[1], plus holiday pay and pension.
  • Plan for the same 5.6 weeks of holiday an employee gets[2], plus time for sickness and training.
  • Measure your billable share for a month; it is usually far lower than sole traders assume.
  • Recheck the rate when you cross a tax threshold such as VAT registration at £90,000 of turnover[3].

Why your hourly rate is not your wage

For example, a sole trader who charges £30 an hour does not earn £30 an hour. Out of that figure come the van, fuel, insurance, tools, phone, software, accountant, registration fees, and every hour spent driving, collecting parts, quoting and doing paperwork. Then there are the weeks you do not work at all: holidays, illness, training and the quiet days after Christmas. Your true labour rate, also called your charge-out rate, is the figure that covers all of that and still leaves the income you set out to earn.

The calculation is simple arithmetic. The hard part is being honest about two numbers: your overheads and the hours you can really bill.

Start from what an employee would earn

A good starting point for target income is what you would earn as an employed plumber, because that is the alternative to running your own business. In 2026 the median gross annual pay of full-time employee plumbers and heating and ventilating installers was £39,179, against £40,911 for all full-time UK employees[1]. Hourly pay spreads widely around the median, from about £13 at the bottom tenth to about £23 at the top fifth[1].

Gross hourly pay of employee plumbers and heating installers, 2026 (provisional)Percentiles of all employee jobs, UK
Gross hourly pay of employee plumbers and heating installers, 2026 (provisional)Column chart. 10th percentile: £12.99; 25th percentile: £15.41; Median: £18.82; 75th percentile: £22.25; 80th percentile: £23.07.£0£10£20£3010th percentile: £12.99£12.9910th percentile25th percentile: £15.41£15.4125th percentileMedian: £18.82£18.82Median75th percentile: £22.25£22.2575th percentile80th percentile: £23.07£23.0780th percentileGross hourly pay of employee plumbers and heating installers, 2026 (provisional)Column chart. 10th percentile: £12.99; 25th percentile: £15.41; Median: £18.82; 75th percentile: £22.25; 80th percentile: £23.07.£0£10£20£3010th percentile: £12.99£12.9910thperce-ntile25th percentile: £15.41£15.4125thperce-ntileMedian: £18.82£18.82Median75th percentile: £22.25£22.2575thperce-ntile80th percentile: £23.07£23.0780thperce-ntile

Source: Office for National Statistics, 2026[1]

Show the data
Point in the pay rangeValue
10th percentile£12.99
25th percentile£15.41
Median£18.82
75th percentile£22.25
80th percentile£23.07

Self-employment is the norm in the trade: about 48% of the UK's plumbers and heating and ventilating installers were self-employed in the year to June 2026[4]. Most of them give up the paid holiday, sick pay and employer pension contributions that employees receive. Your target income should cover those too, or you are working for less than an employee for more risk.

The calculation, step by step

  1. Set your target income

    The amount you want to draw from the business in a year before personal tax. Include an allowance for a pension and for the sick pay you will not get from an employer.

  2. Total your overheads

    Add up a year of business costs: van finance or depreciation, fuel, insurance, servicing, tools and test equipment, calibration, phone, software, accountant, registrations and training, marketing, workwear and any office help.

  3. Add a profit or contingency margin

    A percentage on top for replacing the van, slow months and jobs you have to put right at your own cost.

  4. Work out your available weeks

    Start from 52, take off the 5.6 weeks of holiday an employee would be entitled to[2], and take off an allowance for sickness, training and bad weather.

  5. Work out your available hours

    Multiply the available weeks by the hours you actually work in a typical week, including evenings spent quoting.

  6. Apply your billable share

    Multiply the available hours by the share you can charge to a customer. Measure this for a month rather than guessing.

  7. Divide

    Add target income, overheads and margin, then divide by billable hours. That is your minimum charge-out rate.

A worked Example

Example charge-out rate for a fictional sole trader; every figure is illustrative
LineFigure
Target income before personal tax£42,000
Business overheads for the year£16,500
Profit and contingency at 10% of the above£5,850
Total to recover£64,350
Available weeks (52 minus 5.6 holiday, minus 2 for sickness and training)44.4
Hours worked per week45
Available hours1,998
Billable share65%
Billable hours1,299
Charge-out rate (total to recover divided by billable hours)£49.54, rounded to £50

Example: the sole trader in the table works a 45-hour week, yet needs about £50 for every billable hour to reach a target income of £42,000. If they had assumed every hour was billable, they would have charged about £32 and fallen well short. If they push the billable share from 65% to 75% by planning routes better and collecting parts less often, the same total can be recovered at about £43 an hour. Improving the billable share is often worth more than putting the rate up.

What eats billable hours

Keep a simple log for four weeks: start and finish times on each job, and everything else in between. The usual culprits are:

  • Driving between jobs, especially when the diary zigzags across town.
  • Trips to the merchant for parts that could have been ordered ahead or carried on the van.
  • Free quotes and surveys that do not turn into work.
  • Return visits for faults that were not fixed first time.
  • Paperwork done at home in the evening: invoices, certificates, quotes and emails.
  • Waiting for access, or turning up to find nobody in.

Some of this can be charged, such as travel outside your usual area or a paid survey for large jobs. Some can be reduced by better booking and diary planning. The rest is simply part of the cost of the hours you do bill, which is why it belongs in the calculation.

Write the results down and compare them with the billable share you used in your calculation. If the log shows that you bill fewer hours than you assumed, either the rate goes up or the unbilled time comes down. Usually it is a bit of both.

Tax thresholds that change the maths

Two thresholds affect sole traders directly. Making Tax Digital for Income Tax applied from 6 April 2026 to sole traders with qualifying income over £50,000, and the threshold falls to £30,000 from April 2027 and £20,000 from April 2028[5]. Budget for software and the extra admin time in your overheads once you are in scope.

VAT is the bigger step. You must register if your taxable turnover over the last 12 months goes over £90,000[3]. Once registered, you add VAT at the standard rate of 20% to most work[6], and domestic customers see a price that includes it. Your charge-out rate does not change, but the figure your customers pay does, so plan your pricing and the way you present it before you reach the threshold.

When you take on your first engineer

Employing someone changes the calculation in two ways. Their cost per billable hour is far higher than their hourly wage, once employer National Insurance, pension contributions, holiday pay and unbilled time are added. And your own billable share usually falls, because you spend more time quoting, ordering, planning the diary and checking work. Many owners find their personal billable hours drop sharply in the first year of employing.

Work out a separate charge-out rate for each engineer using their own loaded cost, then check that the firm as a whole still recovers its overheads and your income. If the numbers only work while you are on the tools full time, the business is not yet ready to grow, and it is better to know that before you hire than after.

From labour rate to the prices you quote

The charge-out rate is a floor, not necessarily the figure on your price list. It feeds into every other price you set: your day rate for bigger jobs, your call-out fee, your minimum charge for small jobs and every fixed price you quote. If a fixed price works out at less than your charge-out rate for the hours the job really takes, you are paying for the privilege of doing it.

Check the rate against what other firms nearby charge, but do not copy them blindly. Their costs, hours and billable share are not yours, and a firm charging much less may simply be working out the true figure for the first time next year.

Review the rate twice a year

  • Update overheads with actual figures from your accounts, not estimates.
  • Re-measure your billable share for a fortnight in a busy month and a quiet one.
  • Check what employee plumbers are earning when the annual earnings figures are published each autumn.
  • Allow for known changes: a new van, a bigger insurance premium, a training course, a move into VAT.
  • Put the new rate into your quoting templates on a set date so everyone uses the same figure.

Frequently asked questions

How do I calculate my hourly rate as a self-employed plumber?

Add your target income, a year of business overheads and a profit or contingency margin, then divide by the hours you can actually bill in a year after holidays, sickness, training and unbilled time.

What percentage of my time can I bill?

It varies widely with travel, quoting and paperwork. Log a month of your time to find your own figure; many sole traders find it is well under three-quarters of the hours they work.

What do employed plumbers earn in the UK?

The median gross annual pay of full-time employee plumbers and heating and ventilating installers was £39,179 in 2026 (provisional), and median hourly pay for all employee plumbers was £18.82[1].

Does VAT registration change my labour rate?

Your underlying rate stays the same, but once registered you add VAT, at 20% for most work[6], so the price customers pay rises. You must register once taxable turnover over 12 months exceeds £90,000[3].

References

  1. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC) (opens in a new tab) ↑

  2. GOV.UK (2026). Holiday entitlement (opens in a new tab) ↑

  3. GOV.UK (2026). When to register for VAT (opens in a new tab) ↑

  4. Office for National Statistics (Nomis) (2026). Annual Population Survey - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑

  5. GOV.UK (2026). Check if you're eligible for Making Tax Digital for Income Tax (opens in a new tab) ↑

  6. GOV.UK (2026). VAT rates (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo