Boilers heating

Selling annual unvented cylinder servicing

How to add annual unvented cylinder checks to boiler services: what the check covers, a booking script, summer scheduling and consent for reminders.

Ava research teamPublished 7 min read

On this page
  1. Why the cylinder needs its own check
  2. What an annual unvented check covers
  3. Fitting it into your year
  4. Common findings and how to quote them
  5. Ways to package it
  6. Asking the question at booking
  7. Example: building a cylinder service list
  8. Reminders, consent and records
  9. Frequently asked questions
  10. References

Key takeaways

  • An unvented cylinder carries its own safety devices, so it deserves its own annual check, not a glance during the boiler service.
  • Book cylinder checks in the summer: household gas demand in winter is more than five times the summer level[1], and so is the pressure on your diary.
  • Ask at the booking stage whether the home has an unvented cylinder, and price the check as a clear add-on.
  • Service reminders by email or text need consent or the soft opt-in for existing customers[2].

Why the cylinder needs its own check

Many homeowners think their boiler service covers everything in the airing cupboard. It rarely does. An unvented cylinder runs at mains pressure and depends on an expansion vessel, a pressure reducing valve, an expansion relief valve, a temperature and pressure relief valve and an energy cut-out to stay safe. The warning label Approved Document G expects on every unit tells the user that if the heater develops a fault, such as hot water flowing from the discharge pipe, they should switch it off and contact the installer[3]. Most never look at the tundish, so the first sign of trouble is often a wet ceiling.

Annual servicing is also good business. It brings customers back every year, it finds small faults before they become emergency call-outs, and it gives you a reason to see the boiler, the controls and the cylinder in one visit. The industry is moving in the same direction for rented homes: HHIC and the EUA have called for the mandatory annual gas safety check in rented homes to become a full service with a heating efficiency check[4].

What an annual unvented check covers

Follow the cylinder manufacturer's service schedule, because valve types, expansion arrangements and anode requirements differ between models. The list below is a sensible core that most schedules include. Record each reading against the values on the data plate, which should show the operating pressure of the system and of the expansion valve[3].

  1. Look at the tundish and the visible discharge pipe for signs of past discharge, scale or corrosion.
  2. Check the expansion vessel pre-charge with the water side isolated and drained, and adjust it to the data plate value.
  3. Check the pressure reducing valve setting and clean the line strainer.
  4. Operate the expansion relief valve and the temperature and pressure relief valve as the manufacturer directs, and check they reseat without dripping.
  5. Check the cylinder thermostat, the energy cut-out and, on indirect units, the motorised valve wiring that the cut-out controls.
  6. Inspect the immersion heater, its wiring and its thermostat.
  7. Check the anode or other corrosion protection if the model has one.
  8. Check the warning label is present and readable, and the installer's details are filled in.
  9. Record readings and any advice on the service record, and give the customer a copy.

The paper Benchmark commissioning checklist and service record is no longer maintained; the record has moved online and to the Benchmark apps[5]. Make sure your engineers know how to complete the digital record for the cylinder as well as the boiler, so the customer's service history stays in one place.

Fitting it into your year

Household gas demand in the first quarter of 2026 was 109,126 GWh, against 19,636 GWh in the third quarter of 2025, more than five times higher in winter[1]. Your breakdown calls follow the same curve. Cylinder checks are planned work, so they belong in the months when the phone is quieter and engineers have time to do them properly.

UK household gas demand: summer quarter vs winter quarter
UK household gas demand: summer quarter vs winter quarterComparison. July to September 2025: 19,636 GWh; January to March 2026: 109,126 GWh.19,636 GWhJuly to September 2025July to September 2025: 19,636 GWh109,126 GWhJanuary to March 2026January to March 2026: 109,126 GWhUK household gas demand: summer quarter vs winter quarterComparison. July to September 2025: 19,636 GWh; January to March 2026: 109,126 GWh.19,636 GWhJuly to September 2025July to September 2025: 19,636 GWh109,126 GWhJanuary to March 2026January to March 2026: 109,126 GWh

Source: Department for Energy Security and Net Zero, 2026[1]

Show the data
ItemValue
July to September 202519,636 GWh
January to March 2026109,126 GWh

A simple approach is to move existing boiler service customers with unvented cylinders into a summer window, and to offer anyone who books in winter the choice of a combined visit later or a separate cylinder check in the summer. That spreads the work, protects winter capacity for emergencies and gives you a full summer diary.

Common findings and how to quote them

A cylinder check that finds nothing is good news for the customer, but most checks find something small. Decide in advance how your engineers handle each common finding, so the customer gets a clear answer on the day and the office is not left to call back with a price a week later.

  • Low expansion vessel pre-charge: recharge it during the visit and note the reading; if it will not hold pressure, quote a replacement vessel.
  • Dripping expansion or temperature relief valve: check the pre-charge and the incoming pressure first, because a valve often drips because something upstream is wrong.
  • Blocked line strainer: clean it and tell the customer, because it explains poor flow they may have noticed.
  • Missing or blank warning label: replace it with the installer's details if you can identify them, and record that you did.
  • Corroded or scaled tundish and discharge pipe: photograph it, check for past discharge and advise on whether pipework needs replacing.
  • Immersion heater faults: test the element and thermostat and quote a like-for-like replacement where needed.

Give engineers a small stock of the parts these findings need, such as common relief valve cartridges and a pressure gauge for the vessel, so most repairs happen at the same visit. A same-day repair is cheaper for the customer, quicker for you and a strong reason for them to book again next year.

Ways to package it

Four ways to sell annual unvented checks
OptionWhat it includesWorks best for
Add-on at bookingCylinder check added to the boiler service visit, priced separatelyExisting boiler service customers
Combined annual serviceBoiler, controls and cylinder in one visit with one recordHomes where you installed both
Landlord bundleGas safety check plus cylinder check at the same visitLandlords with several properties
Cylinder-only serviceStand-alone check, often in the summerHomes with a heat pump or electric cylinder and no gas

Keep the price separate from the boiler service, even when the visit is combined. Customers then see exactly what they are paying for, and an engineer who finds the cylinder needs more time can explain the add-on without reopening the boiler price. Landlords are a natural fit: they must already have each gas appliance and flue checked at least every 12 months[6], so adding the cylinder to the same visit saves them a second appointment.

Asking the question at booking

Most firms miss cylinder work because nobody asks. Add two questions to your booking script: does the home have a hot water cylinder, and does it take water straight from the mains, without tanks in the loft? If the customer is unsure, ask them to look for a white or silver cylinder with a label and pipework running to a small funnel, which is the tundish.

  • Booking line: When did the cylinder last have its own service? Most manufacturers want it checked once a year, separately from the boiler.
  • If they ask why: It has safety valves and a pressure vessel that wear over time. We check they still work so it does not discharge or leak.
  • Close: We can do it at the same visit as your boiler service, or book it for the summer when we have more time. Which suits you?

If your phones are answered by a call assistant such as Ava, add the cylinder question to its booking flow so the visit is planned with the right time and parts from the start.

Example: building a cylinder service list

Example (fictional): a three-engineer firm has 600 annual boiler service customers. Over one season it asks every booking about hot water and finds 140 homes with unvented cylinders, 90 of which have had no cylinder check since installation. It offers those 90 a cylinder check as an add-on, scheduled between June and September.

Sixty accept. The checks find several expansion vessels with low pre-charge, a few dripping relief valves and two blank warning labels. Each fault is quoted as a repair at the same visit. The following year the firm offers the cylinder check automatically with every boiler service in those homes, with a clear opt-out, and books them into the summer window.

Direct-marketing emails and texts to individuals need their prior consent, unless the soft opt-in applies to existing customers[2]. A service reminder to a customer who bought a service from you, with an easy way to opt out, usually fits the soft opt-in; a promotional message to someone who has never used you does not. Record how each customer agreed to hear from you and honour opt-outs immediately.

Every service you provide includes a term that you will carry it out with reasonable care and skill[7]. A written record of what you checked, the readings and the advice you gave is your evidence if a valve fails months later. Keep it with the customer's file and the Benchmark record.

Never leave a cylinder in service with a discharging relief valve or a failed energy cut-out. Make it safe, explain why in writing and quote the repair.

Frequently asked questions

Is an unvented cylinder service a legal requirement?

For homeowners it is usually a manufacturer warranty condition rather than a legal duty. It is still the best way to keep the safety devices working.

Does the boiler service cover the cylinder?

Not usually. The cylinder has its own valves, expansion vessel and cut-out, and the manufacturer's schedule needs its own checks and record.

When is the best time to service cylinders?

Summer, when breakdown demand is lowest and engineers have time to do the job properly.

Can I text customers to remind them their cylinder service is due?

Yes for existing customers under the soft opt-in, if they were given a chance to opt out and have not done so. Keep a record of consent.

References

  1. Department for Energy Security and Net Zero (2026). Energy Trends: UK gas, ET 4.1 natural gas supply and consumption (quarterly), September 2026 (opens in a new tab) ↑

  2. legislation.gov.uk (The National Archives) (2003). The Privacy and Electronic Communications (EC Directive) Regulations 2003, regulation 22 (opens in a new tab) ↑

  3. GOV.UK (Ministry of Housing, Communities and Local Government) (2024). Approved Document G: Sanitation, hot water safety and water efficiency (2015 edition, with 2024 amendments) (opens in a new tab) ↑

  4. Heating and Hotwater Industry Council (HHIC) (2025). Call to enhance Gas Safety Checks (opens in a new tab) ↑

  5. Heating and Hotwater Industry Council (HHIC) (2026). Benchmark goes digital - what homeowners need to know (opens in a new tab) ↑

  6. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  7. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 49 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo