Quotes pricing

Pricing boiler services and landlord gas safety checks

Build boiler service and landlord gas safety record prices from time per appliance, travel and admin, with multi-appliance and multi-property pricing.

Ava research teamPublished 7 min read

On this page
  1. Two jobs that are often confused
  2. Build the price from time
  3. Example: building a service price
  4. Additional appliances and properties
  5. Travel zones keep rural work honest
  6. What the service price includes, and what it does not
  7. Landlord duties make this recurring work
  8. Price for the seasons
  9. Make booking and reminders automatic
  10. What to say about the price
  11. Review the price every year
  12. Frequently asked questions
  13. References

Key takeaways

  • Price servicing from time: minutes per appliance, travel, paperwork and a share of the unbilled hours, not from what the firm down the road charges.
  • A gas safety check and a full service are different jobs. Price and describe them separately so landlords know what they are buying.
  • Landlords must have every gas appliance and flue checked at least every 12 months[1], which makes landlord checks dependable recurring work.
  • Winter household gas demand is more than five times the summer level[2]; price and promote summer servicing to move work out of the rush.
  • Quote additional appliances and additional properties at the same visit at a lower rate, because the travel is already paid for.

Two jobs that are often confused

Customers, and some landlords, use ‘service’ and ‘gas safety check’ as if they meant the same thing. They do not, and pricing them as one job either undercharges for the service or overcharges for the check.

Boiler service and landlord gas safety check compared; many landlords buy both at one visit.
FeatureAnnual boiler serviceLandlord gas safety check
PurposeKeep the appliance working efficiently and within the manufacturer's warranty termsConfirm each gas appliance, fitting and flue is safe, as required by law for rented homes
Who needs itAny homeowner, and often required for warrantiesLandlords, for every gas appliance and flue in the let property
What it involvesInspection, cleaning, component checks, combustion analysis, adjustments as the manufacturer specifiesSafety checks on each appliance and flue, tightness test, ventilation, recorded on a gas safety record
PaperworkService record, often in the Benchmark appGas safety record for the landlord and tenants
Typical timeLonger: varies with appliance type and conditionShorter per appliance, but every appliance in the property

Many landlords want both on the same visit. Offer the combination as a named option with its own price, rather than letting them assume the check includes the service.

Build the price from time

  1. Time on site per appliance

    Measure it over a month of real jobs: arrival to departure, for each appliance type. Use the median, not your best day.

  2. Travel per visit

    Average travel time between jobs in your normal area, plus parking. Rural and city work need different figures.

  3. Paperwork and booking

    Time spent booking, sending reminders, writing records and taking payment. On servicing this is often a third as long as the visit itself.

  4. Your hourly cost

    Wages or your own drawings target, plus employer costs, the van, tools and analyser calibration, insurance, registration and a share of unbilled time.

  5. Consumables and margin

    Seals, gaskets and cleaning materials used on a typical service, plus your margin.

Multiply the hours by your hourly cost and add the consumables and margin. That is your floor. If the market in your area pays more, you can price above it; if it pays less, you need to cut the time, not the margin.

For reference, the median employee plumber or heating installer earned £18.82 an hour in 2026[3]. Your hourly cost will be well above any wage figure once the van, insurance, tools and unbilled hours are included.

Example: building a service price

Example time build for a fictional firm; measure your own jobs before using any figures.
Item (Example)Combi serviceGas safety record, one boiler and one hob
On-site time50 minutes35 minutes
Travel and parking25 minutes25 minutes
Booking, records, payment15 minutes15 minutes
Total time1 hour 30 minutes1 hour 15 minutes
ConsumablesSeal kit and cleaningNone

In this Example, the firm's fully loaded hourly cost is £60. The combi service costs £90 in time plus consumables before margin; the gas safety record costs £75. If the firm had priced the check at the same figure as the service, it would have been overcharging slightly on the check and undercharging on the service.

Additional appliances and properties

Once the van is parked, each extra appliance costs only its own on-site time and paperwork. Price accordingly.

  • First appliance at the full price, including travel and admin.
  • Each additional appliance at the same address at a lower price that covers its own time.
  • Additional properties on the same day and street, such as a landlord's block of flats, at a reduced travel element.
  • Parts and repairs found during the check quoted separately, with the customer's approval before you proceed.

Write the rules on your price list. Landlords with several properties compare firms on the total for their portfolio, and a clear multi-appliance price often wins the whole account.

Travel zones keep rural work honest

A single service price across a wide area quietly subsidises the furthest customers with the nearest ones. If a third of your servicing is a forty-minute drive away, those visits may be losing money while the town-centre ones carry them.

  • Draw two or three zones around your base by drive time, not by distance, so that slow roads are priced fairly.
  • Keep one price for your core zone and add a stated travel element for the outer zones.
  • Group outer-zone bookings on the same day, and offer customers a small saving for accepting a ‘we're in your area on Tuesday’ slot.
  • Check the zones each year against where your work actually comes from.

Customers rarely object to a travel charge that is written on the price list. They object to one that appears for the first time on the invoice.

What the service price includes, and what it does not

Most disputes about servicing are about what happens when the engineer finds something. Decide the rules and write them on the booking confirmation.

  1. Included: the service to the manufacturer's instructions, a combustion check, minor adjustments, standard consumables such as seals, and the service record.
  2. Not included: replacement parts other than standard seals, repairs to faults found, system flushing, and work on other appliances unless booked.
  3. Faults found: the engineer explains what is wrong and quotes for the repair before doing anything beyond the service.
  4. Unsafe situations: if an appliance is unsafe, the engineer follows the industry procedure for unsafe situations and explains it to the customer in writing.
  5. Failed visits: if the customer is not in or the appliance cannot be accessed, a stated failed-visit charge applies.

Clear inclusions protect your margin without making the service look stingy, and they stop a service visit turning into an unpaid repair.

Landlord duties make this recurring work

Landlords must have each gas appliance and flue checked for safety within 12 months of installation and then at intervals of not more than 12 months[1]. They must give existing tenants a copy of the record within 28 days of the check, and new tenants before they move in[4]. Every landlord customer is therefore a repeat booking each year, as long as you remind them in time.

Trade bodies have argued that the mandatory check should become a full service with an efficiency check[5]. That is not law today, but it is worth explaining to landlords why a combined service and check is good value, especially for older boilers.

Price for the seasons

Gas demand shows how lopsided the year is. UK household gas use was 109,126 GWh in the first quarter of 2026 against 19,636 GWh in the third quarter of 2025, more than five times higher in winter[2]. Breakdown calls follow the same curve, and every service you move into summer frees an engineer for winter repairs.

UK household gas demand by quarter
UK household gas demand by quarterComparison. Jan to Mar 2026: 109,126 GWh; Jul to Sep 2025: 19,636 GWh.109,126 GWhJan to Mar 2026Jan to Mar 2026: 109,126 GWh19,636 GWhJul to Sep 2025Jul to Sep 2025: 19,636 GWhUK household gas demand by quarterComparison. Jan to Mar 2026: 109,126 GWh; Jul to Sep 2025: 19,636 GWh.109,126 GWhJan to Mar 2026Jan to Mar 2026: 109,126 GWh19,636 GWhJul to Sep 2025Jul to Sep 2025: 19,636 GWh

Source: Department for Energy Security and Net Zero, 2026[2]

Show the data
ItemValue
Jan to Mar 2026109,126 GWh
Jul to Sep 202519,636 GWh
  • Offer a summer service price or a priority winter call-out for customers who book between May and August.
  • Send service reminders for summer slots first, and keep autumn slots for landlords whose renewal dates fall then.
  • Use Gas Safety Week, held in mid-September in 2026[6], as a prompt for landlord and homeowner reminders.

Make booking and reminders automatic

Servicing is only profitable when the booking and reminder work is cheap. Send reminders a month before each due date, let customers choose a slot without a phone call where possible, and confirm the day before. When customers do ring to book, the call should be answered: some firms use Ava to take those calls and book the routine visit into the diary, so the office is not tied up with simple bookings in peak season.

What to say about the price

‘Our annual service is a full manufacturer-standard service with a flue gas analysis and a digital service record. If you also need a landlord gas safety record, we can do both at one visit for a combined price, and any extra gas appliances are charged at a lower rate.’

Describe what the customer gets in one or two sentences, mention the combined option for landlords and quote any repairs separately. Customers rarely argue with a service price that is clearly explained; they argue with the extras they did not expect.

Review the price every year

Servicing prices drift below cost more easily than any other price, because they are small, frequent and rarely questioned. Once a year, take a month of real service jobs, recalculate the time per visit and your hourly cost, and compare the result with the price you charge. If the gap has grown, raise the price for the next renewal round, with notice, rather than absorbing it.

Frequently asked questions

How should I price a boiler service?

From time: median on-site minutes per appliance, travel, paperwork and booking, multiplied by your fully loaded hourly cost, plus consumables and margin.

Is a gas safety check the same as a boiler service?

No. A gas safety check confirms appliances and flues are safe and is required for rented homes; a service maintains the appliance to the manufacturer's standard. Many landlords buy both at one visit.

How often do landlords need a gas safety check?

At intervals of not more than 12 months for each gas appliance and flue[1], with a copy of the record given to tenants within 28 days[4].

Should I charge less for extra appliances?

Yes. Travel and admin are already covered by the first appliance, so price additional appliances at the same address to cover their own time and paperwork.

References

  1. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  2. Department for Energy Security and Net Zero (2026). Energy Trends: UK gas, ET 4.1 natural gas supply and consumption (quarterly), September 2026 (opens in a new tab) ↑

  3. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  4. GOV.UK (2026). Your landlord's safety responsibilities (opens in a new tab) ↑

  5. Heating and Hotwater Industry Council (HHIC) (2025). Call to enhance Gas Safety Checks (opens in a new tab) ↑

  6. Heating and Hotwater Industry Council (HHIC) (2026). HHIC supports Gas Safety Week 2026 and urges households to 'Take No Chances' (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo