Landlord commercial work

Passing pre-qualification and accreditation checks

How plumbing and heating firms pass pre-qualification questionnaires and safety accreditation: SSIP schemes, common questions, evidence and a prep plan.

Ava research teamPublished 7 min read

On this page
  1. What pre-qualification is really testing
  2. Safety schemes and SSIP
  3. The questions you will meet, and evidence that passes
  4. Competence: gas and water
  5. Cyber security questions
  6. Answering the free-text questions
  7. A preparation plan
  8. Example: passing an FM onboarding portal
  9. Choosing which scheme to join
  10. Frequently asked questions
  11. References

Key takeaways

  • Pre-qualification checks whether you are safe, insured, solvent and competent before a client will send work.
  • More than 90,000 suppliers are registered with an SSIP member scheme, and SSIP aims to cut duplicated health and safety assessments[1].
  • Gas work can only be done by businesses in the HSE-approved class, which in practice means the Gas Safe Register[2].
  • Cyber questions are now common; phishing hit 35% of micro businesses in 2025[3].
  • Ask your three biggest target clients which scheme they accept before you pay for any of them.

What pre-qualification is really testing

Before a facilities management company, main contractor, school trust or housing provider sends you work, it needs to know you will not become its problem. Pre-qualification is that check. It may arrive as a selection questionnaire in a tender, an onboarding portal run by an FM company, or a requirement to hold a recognised third-party accreditation before you can be added to an approved list.

The forms vary, but the questions fall into the same few areas: health and safety, insurance, financial standing, quality and complaints, environmental management, equality, modern slavery, data protection and cyber security, and technical competence. A firm that has its evidence ready for each area can complete most questionnaires in an afternoon. A firm that does not will lose days and sometimes the opportunity.

Treat pre-qualification as a one-off project with yearly upkeep, not as paperwork you scramble for each time a client asks.

Safety schemes and SSIP

Many clients ask for a third-party health and safety accreditation instead of assessing your policies themselves. Common names in the plumbing and heating trade include CHAS, SafeContractor, Constructionline, SMAS Worksafe and Achilles. Many of these schemes are members of Safety Schemes in Procurement, known as SSIP, which describes itself as a central platform that reassures buyers about suppliers' health and safety competence[1].

90,860

suppliers registered with an SSIP member scheme (January 2026)[1]

SSIP member schemes recognise each other's core health and safety assessments at the same level, a process known as deem to satisfy. The aim is to reduce the need for further assessments[1]. In practice this means one SSIP assessment may let you register with a second scheme quickly, but clients can still insist on their preferred scheme and on extra modules, such as financial checks or site visits.

Some clients go beyond the SSIP core and ask for a higher level of accreditation that includes environmental, quality and equality questions, often based on the PAS 91 question set used across construction pre-qualification. Ask what level is required before you buy.

The questions you will meet, and evidence that passes

Common pre-qualification questions for heating and plumbing contractors
Question areaWhat they askEvidence that passes
Health and safetyPolicy, responsibilities, competent advice, accident recordsSigned policy reviewed this year, named competent person, accident book summary, toolbox talk records
Risk assessmentHow you assess and control hazards on siteSample risk assessments and method statements for gas work, hot works, working at height and confined spaces
CompetenceWho is qualified to do whatGas Safe registration with each engineer's categories, unvented and water regulations cards, training matrix
InsuranceEmployer's liability, public liability, professional indemnity where design is involvedCurrent certificates with limits that meet the client's minimum
Financial standingAccounts, credit score, turnoverLatest filed accounts or management accounts signed by your accountant
Quality and complaintsHow you handle defects and complaintsComplaints procedure, sample complaint log, recall rate
EnvironmentWaste, carriers, refrigerants where relevantWaste carrier registration, waste transfer notes, environmental policy
Data and cyberHow you protect client and resident dataData protection policy, device and password rules, Cyber Essentials if held
SafeguardingWork in homes, schools or care settingsSafeguarding policy, DBS approach, ID badges, lone working procedure

Write every policy in your own words and make sure it matches what you actually do. Assessors increasingly ask for proof that a policy is used, such as a dated toolbox talk record or a completed risk assessment from a real job. Copying a template you have never read is the fastest way to fail a follow-up question.

Competence: gas and water

Gas competence is not optional. By law, no employer or self-employed person may carry out work on a gas fitting unless they belong to a class of persons approved by the HSE, which in practice is the Gas Safe Register[2]. Clients will check the business registration and each engineer's work categories, so keep a current list showing who can work on which appliances, including commercial categories if you bid for non-domestic sites.

For domestic installation work, membership of a competent person scheme also helps. Homeowners do not need building regulations approval themselves if they use an installer registered with one[4], which is why domestic clients and some landlords ask about it. Commercial clients are more interested in commercial gas categories, unvented hot water competence and water hygiene training for legionella-related tasks.

Cyber security questions

Cyber questions used to be rare in trade pre-qualification. Now they are common, because a supplier with access to a client's systems or residents' data is a route in for attackers. 43% of UK businesses reported a cyber breach or attack in the 12 months before the 2025 government survey[5]. Among micro businesses, 35% identified phishing attacks in 2025, down from 40% the year before[3].

UK micro businesses identifying phishing attacks
UK micro businesses identifying phishing attacksComparison. 2024: 40%; 2025: 35%.40%20242024: 40%35%20252025: 35%UK micro businesses identifying phishing attacksComparison. 2024: 40%; 2025: 35%.40%20242024: 40%35%20252025: 35%

Source: Department for Science, Innovation and Technology (GOV.UK), 2025[3]

Show the data
ItemValue
202440%
202535%

Only 9% of micro businesses were aware of the government's Cyber Essentials scheme in 2025[6], so holding the certificate still sets you apart. Even without it, answer the cyber questions with specifics: who has admin rights, how devices are locked, how you handle a lost phone and how often staff are reminded about suspicious emails. See Cyber Essentials for contracts for the steps.

Answering the free-text questions

Most questionnaires mix yes or no boxes with a few free-text questions, and the free text is where assessors decide whether your policies are real. Use a simple pattern for every answer: what you do, who does it, how often, and where the record is kept.

For example, a weak answer to a question about supervising engineers says that the firm takes safety seriously and supervises all staff. A strong answer says that the contracts manager carries out an unannounced site check on each engineer every month, uses a written checklist covering gas work, isolation, PPE and housekeeping, and keeps the completed checklists in the shared drive with actions closed out within two weeks.

  • Name roles, not just the business: who signs off risk assessments, who investigates accidents, who reviews policies.
  • Give frequencies: monthly site checks, yearly policy reviews, toolbox talks every fortnight.
  • Point to records an assessor could ask to see.
  • Mention one improvement you made after something went wrong; it shows the system works.

Keep your best answers in a shared document and reuse them as a starting point, but adjust each one to the client. A care home operator wants to hear about safeguarding and infection control, a retail FM company about out-of-hours access and alarm codes, and a school trust about working during term time.

A preparation plan

  1. List your target clients

    Write down the ten organisations you most want work from, and find out which accreditation and level each one accepts. Usually one or two schemes cover most of them.

  2. Build the policy pack

    Health and safety, environmental, quality, equality, modern slavery statement where relevant, data protection, safeguarding, lone working and complaints. Date each one and name an owner.

  3. Collect proof of use

    Pick three recent jobs and keep their risk assessments, method statements, photos and sign-off sheets as samples.

  4. Book the assessment

    Complete the scheme's questionnaire, upload evidence and answer follow-up questions quickly. Assessors often allow a short window to fix gaps.

  5. Set renewal reminders

    Accreditations, insurance and Gas Safe cards expire on different dates. Put every renewal in a shared calendar with a reminder six weeks ahead.

Example: passing an FM onboarding portal

Example: a four-engineer heating firm is invited to join a facilities management company's supply chain for boiler repairs in retail units. The portal asks for an SSIP-recognised accreditation, public liability cover at the FM company's minimum, commercial gas categories for at least two engineers, a sample risk assessment for plant room work and a data protection policy. The firm already holds an SSIP scheme certificate from a previous housing contract, so the safety section passes on deem to satisfy. Its gap is commercial gas: only one engineer holds the categories. It books the second engineer's assessment, uploads everything else the same week and is approved for the region once the new card arrives. For what follows onboarding, see subcontracting for facilities management companies.

Choosing which scheme to join

  • Start from demand: the scheme your best clients name is the right one, whatever its marketing says.
  • Check the level: a basic safety assessment may not satisfy a client that wants financial and quality modules too.
  • Check renewal effort: some schemes reassess every year with fresh evidence; plan staff time for it.
  • Check member reach: some schemes give access to client portals or contractor directories that bring enquiries.

Public buyers also run their own selection questions under the Procurement Act. Read the Procurement Act and small contractors and finding commercial plumbing and heating clients to see where accreditation fits in a wider plan.

Frequently asked questions

What is the difference between CHAS, SafeContractor and Constructionline?

They are separate accreditation schemes that assess contractors for clients. Many are SSIP members, so their core safety assessments are recognised by each other, but clients often prefer one. Ask your target clients which they accept.

Is SSIP itself an accreditation?

No. SSIP is an umbrella for member schemes. You are assessed by a member scheme, and SSIP's mutual recognition helps that assessment count with other members.

Do I need Cyber Essentials to work for commercial clients?

Not always, but some public and larger commercial buyers require it. Where it is not required, clear answers about devices, passwords and phishing training still score well.

How long does accreditation take?

It depends on how ready your policies and evidence are. A firm with a complete policy pack and sample job records can usually move through an assessment much faster than one starting from scratch.

References

  1. SSIP (2026). Safety Schemes in Procurement (SSIP) (opens in a new tab) ↑

  2. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑

  3. Department for Science, Innovation and Technology (GOV.UK) (2025). Cyber security breaches survey 2025 (opens in a new tab) ↑

  4. GOV.UK (2026). Building regulations approval (opens in a new tab) ↑

  5. Department for Science, Innovation and Technology (GOV.UK) (2025). Cyber security breaches survey 2025 (opens in a new tab) ↑

  6. Department for Science, Innovation and Technology (GOV.UK) (2025). Cyber security breaches survey 2025 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo