Staffing training

PPE and workwear for plumbers: what to provide and why

Which PPE a plumbing and heating firm must provide, who it covers since the 2022 changes, a task-by-task kit list and how to write a workwear policy.

Ava research teamPublished 7 min read

On this page
  1. What the law asks of a heating firm
  2. Who you must provide PPE for
  3. PPE is the last line, not the first
  4. A task-by-task kit list
  5. Checking, storing and replacing kit
  6. Workwear: the separate policy
  7. Night call-outs and working alone
  8. When someone will not wear it
  9. Writing your PPE policy in an afternoon
  10. Example: the issue log
  11. Frequently asked questions
  12. References

Key takeaways

  • Since 6 April 2022 the PPE duties cover limb (b) workers as well as employees, so casual and agency-style workers get the same free kit[1].
  • You cannot charge workers for PPE they need to do their job[1].
  • PPE is the last line of protection: plan out the hazard first, then issue kit for what remains.
  • Branded workwear is not PPE. Treat it as a separate policy with its own rules on issue, care and return.
  • Keep an issue log with sizes, dates and signatures. It is your evidence that kit was provided, maintained and explained.

What the law asks of a heating firm

The Personal Protective Equipment at Work Regulations require employers to assess risks, decide where PPE is needed, provide it, and look after it. The 2022 amendment, in force since 6 April 2022, extended employers' and employees' PPE duties to limb (b) workers[1]. Where your risk assessment shows PPE is needed, you carry out a suitability assessment and provide it free of charge, as you do for employees[1]. You are also responsible for its maintenance, storage and replacement, and you must give training and instruction in its use[1].

The plain-English version for a small firm: if the job needs it, you buy it, you make sure it fits, you show people how to use it and you replace it when it wears out. You cannot charge workers for PPE they require to carry out their work[1], and that includes taking it out of wages.

Who you must provide PPE for

PPE responsibility by working status
WhoWho provides the PPEPractical note
Employees on your payrollYou, free of chargeFit-tested where needed, logged, replaced when worn
Limb (b) workers (casual, zero-hours, some labour-only arrangements)You, free of charge, since April 2022[1]Treat exactly as employees for PPE
Genuinely self-employed subcontractorsUsually the subcontractorSet a minimum PPE standard in the subcontractor agreement
Agency workersAgree in writing with the agencyCheck who supplies what before the first shift

Status matters because so much of the trade works on a self-employed basis: about 71,200 UK plumbers and heating installers were self-employed in the year to June 2026, close to half the occupation[2]. If you regularly use the same people on day rates, under your direction and your hours, they may be limb (b) workers rather than truly self-employed. If in doubt, provide the kit. A pair of gloves is cheaper than an argument about status after an injury.

PPE is the last line, not the first

Construction remains one of the most dangerous sectors to work in. Of the 126 workers killed in work-related incidents in Great Britain in 2025/26, 25 worked in construction, the highest of any sector, and falls from height were the most common cause of death, with 31[3]. Most of those deaths are not stopped by PPE. They are stopped by planning: a proper ladder or tower, a loft board, a second person, a decision not to go up.

Worker deaths in Great Britain by sector, 2025/26Provisional figures. All other sectors is the total less the two named sectors.
Worker deaths in Great Britain by sector, 2025/26Donut chart. Construction: 25; Agriculture, forestry and fishing: 22; All other sectors: 79.Construction: 25Agriculture, forestry and fishing: 22All other sectors: 79126 workers
  • Construction 25 20%
  • Agriculture, forestry and fishing 22 17%
  • All other sectors 79 63%

Source: Health and Safety Executive, 2026[3]

Show the data
ItemValue
Construction25
Agriculture, forestry and fishing22
All other sectors79

So start every PPE decision with the job. Can the hazard be removed, such as cutting pipe in the garden rather than a dusty cupboard? Can it be reduced, such as using a press-fit system instead of a blowtorch near timber? Only then pick the PPE for what is left. Your risk assessments should show that thinking, because it is what an inspector or insurer will ask about.

A task-by-task kit list

Starting point for a plumbing and heating PPE assessment
TaskMain hazardsTypical PPE
Soldering and hot worksBurns, sparks, fumesHeat-resistant gloves, safety glasses, fire blanket on the van
Cutting, drilling, chasing wallsDust, flying debris, noiseEye protection, FFP3 mask for silica dust, ear defenders
Drain and soil stack workBiological contaminationNitrile gloves, eye protection, disposable coveralls
Lofts and tight voidsHead strikes, insulation fibres, heatBump cap, FFP mask, knee pads, head torch
Commercial and new-build sitesSite traffic, falling objectsHard hat, hi-vis, safety boots, gloves to site rules
Chemical flushing and descalingSplashes, skin irritationChemical gloves, goggles, apron
Gas workCarbon monoxide, gas escapePersonal CO monitor alongside your test equipment

Treat the list as a starting point. Your own work mix decides the final kit: a drainage firm needs more biological protection, a commercial boiler firm more site kit. Asbestos is a special case. If you suspect asbestos, the answer is to stop work and follow your asbestos procedure, not to put on a paper mask and carry on.

Gas work deserves its own line in the policy. The NHS lists gas boilers, cookers and heaters among household appliances that can produce carbon monoxide when badly installed, faulty or poorly maintained[4], and engineers spend their days next to exactly those appliances, often in small rooms. A personal CO monitor clipped to the engineer is cheap and gives a warning before symptoms start. It is also a reminder that only people in the approved class, in practice Gas Safe registered engineers, may work on gas fittings at all[5]. PPE never replaces competence.

Checking, storing and replacing kit

Kit that sits crushed in the bottom of a tool bag stops protecting anyone. The duty to maintain and store PPE is yours as the employer, but day to day it is the engineer who notices a cracked lens or a split glove. Make the checks routine rather than relying on memory.

  • A labelled PPE box or bag in each van, separate from tools and chemicals.
  • A weekly van check that includes PPE alongside stock and test equipment.
  • Spare sizes held at the office or unit so replacements are same-day.
  • Masks and filters replaced in line with the manufacturer's guidance, with dates written on reusable filters.
  • Calibration dates for personal CO monitors on the same list as analysers.
  • A rule that damaged kit goes in the bin, not back in the van.

Ask engineers what they would change. People wear kit that is comfortable and fits. If someone keeps leaving safety glasses off, the problem may be fogging or fit, and a different product solves it faster than a warning letter.

Workwear: the separate policy

Branded polo shirts, fleeces and trousers help customers recognise your engineers at the door, which matters for trust. They are uniform, not PPE, unless they also protect against a specific hazard such as hi-vis. That means the free-of-charge PPE rule does not automatically apply. Most firms supply workwear free anyway, because asking engineers to pay for your logo feels petty and because deductions from pay can create minimum wage problems.

  • Starter set: how many of each item, issued on day one.
  • Replacement: on request when worn, with the old item returned.
  • Care: who washes it, and whether it may be worn outside work.
  • Leavers: what must be returned and by when.
  • Standards: clean workwear at every customer visit, shoe covers and dust sheets in every van.

Night call-outs and working alone

Emergency work changes the kit list. An engineer arriving at a flooded basement at 11pm, alone, needs more than gloves. Add a head torch, wellington boots or waders, a waterproof jacket and a charged phone with a check-in routine. Make sure the engineer knows they can refuse to enter a space that feels unsafe, such as standing water near live electrics, and wait for the supply to be isolated.

Write the lone-working arrangements into the same policy so they are read together: who the engineer calls on arrival and departure, what happens if they do not check in, and which jobs always need two people.

When someone will not wear it

Employees and workers have duties too: they must use the PPE provided in line with their training and report loss or defects. If an engineer repeatedly refuses, start with a conversation about why. If the reason is discomfort, fix the product. If it is attitude, treat it as a conduct issue under your disciplinary procedure, and record each conversation. Never let it slide on a commercial site, where the principal contractor can remove your whole team for one person's breach.

Writing your PPE policy in an afternoon

  1. List the tasks

    Use the last three months of jobs to list what your engineers actually do, from services to drain clearance.

  2. Match hazards and PPE

    For each task, write the hazard, the control you use first and the PPE for what remains.

  3. Choose products and sizes

    Pick specific products, including fit options for different face shapes and hand sizes. A mask that does not seal does not work.

  4. Set issue and replacement rules

    Say what is issued on day one, what is kept on the van and how worn kit is replaced.

  5. Train and record

    Show each worker how to use, check and store the kit, and record that you did.

  6. Review

    Revisit the policy when you take on a new type of work, after any incident and at least once a year.

Example: the issue log

Example (fictional): a four-engineer firm in Cardiff keeps a one-page log per engineer. Each line has the item, size, date issued, date replaced and the engineer's initials. Disposable items such as gloves and coveralls sit on a van stock list instead, checked every Friday with the parts. When an engineer reported a skin reaction to a descaling chemical, the owner could show the gloves issued, the training date and the product data sheet, then switch to a different glove the same week.

Frequently asked questions

Do I have to provide PPE to subcontractors?

For limb (b) workers, yes, free of charge, since April 2022. Genuinely self-employed subcontractors usually provide their own, but set the standard in writing.

Can I charge engineers for PPE or deduct it from wages?

No. You cannot charge workers for PPE they need to carry out their work.

Is branded workwear PPE?

Not usually. Uniform is not PPE unless it protects against a specific hazard, such as hi-vis clothing on a site.

How often should PPE be replaced?

When it is worn, damaged or past its use-by date, and whenever it no longer fits. Your policy should say how engineers ask for a replacement.

References

  1. Health and Safety Executive (2022). Personal Protective Equipment at Work (Amendment) Regulations 2022 (opens in a new tab) ↑

  2. Office for National Statistics (Nomis) (2026). Annual Population Survey - regional - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑

  3. Health and Safety Executive (2026). Latest annual work-related fatalities published (opens in a new tab) ↑

  4. NHS (2026). Carbon monoxide poisoning (opens in a new tab) ↑

  5. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo