Staffing training

Employment contracts for engineers: the key clauses

The day-one written statement plus the clauses a plumbing and heating firm needs: hours, on-call, overtime, vans, training costs, holiday and notice.

Ava research teamPublished 7 min read

On this page
  1. What must be in writing on day one
  2. Hours, overtime and on-call
  3. Pay and the legal floor
  4. Holiday, sickness and pension
  5. Clauses specific to plumbing and heating
  6. Probation and notice
  7. Changing contracts once people are in post
  8. Example: rewriting a contract for on-call work
  9. Before you issue the contract
  10. Frequently asked questions
  11. References

Key takeaways

  • The principal written statement is due on the first day of work, and employees and workers are both entitled to one[1].
  • Engineers work longer than most: median paid hours of 40 a week against 36.9 for all employees[2], so the hours and on-call clauses carry the most weight.
  • The 48-hour average limit is measured over 17 weeks, and engineers can opt out in writing[3].
  • On-call time spent away from the workplace does not count as working time, but time on call at the workplace does[4].
  • Training repayment, van and customer data clauses protect the firm, but only if they are fair and clearly written.

What must be in writing on day one

Every employee and worker is entitled to a written statement of their main terms[1]. The principal statement must be given on the first day of employment and must include, at least, how much and how often the person will be paid, the hours and days of work and whether and how they may vary, holiday entitlement, any probation period and its conditions, and any training the employer requires, whether or not you pay for it[1]. Sick pay and notice information must also be available on day one, either in the statement or in a document the person can reasonably access.

Some items can follow within 2 months: pension arrangements, collective agreements, optional training rights, and disciplinary and grievance procedures[1]. In practice, a small firm is better off putting everything into one contract and one staff handbook, signed on day one. It is less paperwork to manage and leaves no gaps.

Hours, overtime and on-call

This is the clause most often argued about in heating firms. Employee plumbers and heating installers had median total paid hours of 40 a week in 2026, against 36.9 for all UK employees[2]. Add winter overtime and an on-call rota and the hours can climb quickly.

Median total paid hours per week, 2026
Median total paid hours per week, 2026Comparison. Employee plumbers and heating installers: 40 hours; All UK employees: 36.9 hours.40 hoursEmployee plumbers and heating installersEmployee plumbers and heating installers: 40 hours36.9 hoursAll UK employeesAll UK employees: 36.9 hoursMedian total paid hours per week, 2026Comparison. Employee plumbers and heating installers: 40 hours; All UK employees: 36.9 hours.40 hoursEmployee plumbers and heatinginstallersEmployee plumbers and heating installers: 40 hours36.9 hoursAll UK employeesAll UK employees: 36.9 hours

Source: Office for National Statistics, 2026[2]

Show the data
ItemValue
Employee plumbers and heating installers40 hours
All UK employees36.9 hours

Workers cannot work more than 48 hours a week on average, normally averaged over 17 weeks, unless they choose to opt out[3]. The opt-out must be voluntary and in writing, and it should sit in a separate document rather than buried in the contract, so it is clear the engineer chose it. What counts as working time also matters. Time spent on call at the workplace counts, and so does travel between home and jobs at the start and end of the day for workers with no fixed place of work. Time on call away from the workplace does not[4]. A mobile engineer driving from home to the first job is therefore usually working from the moment they set off.

Sample clause: 'Your normal hours are 8am to 5pm, Monday to Friday, with an unpaid lunch break of 30 minutes. You may be required to work reasonable overtime to complete jobs or respond to emergencies. You will join the on-call rota, normally one week in five, and will receive a standby payment for each week on call plus your overtime rate for hours worked on a call-out.'

Spell out how a call-out is paid: from leaving home or arriving on site, with a minimum paid time, and what happens if the call is resolved by phone. Vague on-call terms are the commonest source of resentment in small heating firms.

State the basic rate, overtime rates, standby payments, bonuses and when pay is reviewed. Whatever the structure, average pay across the pay reference period must not fall below the minimum. The National Living Wage for workers aged 21 and over is £12.71 an hour from April 2026, rising to £13.21 from April 2027[5]. That matters most for apprentices, improvers and office staff on long weeks, where unpaid travel time or deductions for uniform can quietly push the average under the line.

  • Basic hourly rate or annual salary, and how often it is paid.
  • Overtime rates for weekday evenings, Saturdays, Sundays and bank holidays.
  • Standby payment for on-call weeks and the minimum paid time for a call-out.
  • Bonus or commission schemes, with a note that rules are in a separate document that may change.
  • Any deductions the employee agrees to in writing, such as unreturned tools.

Holiday, sickness and pension

Almost all workers are entitled to 5.6 weeks' paid holiday a year[6]. Say whether bank holidays are included, how far ahead holiday must be requested, and any busy periods when leave may be refused, such as the first cold fortnight of winter. Be reasonable: blanket bans on all winter leave make good engineers leave.

For sickness, state the reporting procedure (phone the office before 7.30am, not a text to a colleague), what evidence you need and when, and what you pay. Statutory Sick Pay for 2026 to 2027 is £123.25 a week or 80% of average weekly earnings, whichever is lower[7], so any company sick pay above that should be described clearly, including how long it lasts. On pensions, employers must pay at least 3% under auto-enrolment, with a total minimum contribution of 8%[8].

Clauses specific to plumbing and heating

  1. Place of work and area

    Name the base, the area you cover and that engineers travel to customers' premises. Allow for occasional work further afield on larger contracts.

  2. Vans, tools and phones

    Refer to the van policy, list the tools and equipment the firm provides, and say what happens if they are lost, damaged or not returned.

  3. Qualifications

    Make it a condition that the engineer keeps their gas competence certificates and other tickets current, and tells you at once if one lapses.

  4. Training cost repayment

    If you pay for ACS, unvented or heat pump courses, a clawback on a sliding scale, for example reducing to nothing over two years, is fairer and easier to defend than a flat fee.

  5. Customer data and confidentiality

    Customer lists, prices and job records belong to the firm and must not be copied or taken on leaving.

  6. Restrictive covenants

    A short, narrow non-solicitation clause for customers the engineer dealt with is more likely to be enforceable than a broad non-compete.

  7. Driving

    Require a valid licence, consent to licence checks and prompt reporting of any points or bans.

Probation and notice

Set a probation period, commonly three or six months, with a review meeting before it ends and the option to extend once. Unfair dismissal rules are changing, with a much shorter qualifying period on the way (see our guide to employment law changes), so probation reviews need to be real reviews, written down, not a formality. Set notice periods for both sides that suit the business. A month either way after probation gives you time to cover an engineer's diary.

Changing contracts once people are in post

Templates age. A firm that started with domestic boiler work may now run heat pump installs, commercial maintenance contracts and a night rota, none of which the original contract mentions. Changing terms needs agreement. Explain the reason, put the new terms in writing, give people time to ask questions and record their agreement with a signature. Where a change benefits staff, such as a new standby payment, agreement is easy. Where it takes something away, such as reducing overtime rates, take advice first, because imposing it can lead to claims and lost goodwill.

Keep a version number and date on every contract and handbook, so you always know which terms apply to which engineer.

Example: rewriting a contract for on-call work

Example (fictional): a heating firm in Sheffield uses an old template that says 'hours as required'. After an argument over a Christmas call-out, the owner rewrites the hours section. The new version sets normal hours, a one-in-five on-call rota, a flat weekly standby payment, call-out pay from leaving home with a minimum of one hour, and a separate signed opt-out from the 48-hour average. Engineers can swap on-call weeks with the office's agreement. The rota disputes stop because the rules are written down and identical for everyone.

Before you issue the contract

  1. Does it include every item the principal statement must contain?
  2. Are hours, overtime and on-call pay clear enough that two people would calculate the same payslip?
  3. Is the 48-hour opt-out a separate, voluntary document?
  4. Do clauses on training costs, deductions and restrictive covenants look fair to an outsider?
  5. Do the van policy, handbook and contract agree with each other?
  6. Has a solicitor or HR adviser checked the template in the last two years?

Frequently asked questions

Do I have to give a contract on the first day?

You must give the principal written statement on the first day. A few items, such as pension details and procedures, can follow within 2 months.

Does on-call time count towards the 48-hour limit?

Time on call at the workplace counts. Time on call away from the workplace, such as at home waiting for a phone call, does not, but hours spent attending call-outs do.

Can I make engineers repay training costs if they leave?

You can include a repayment clause, but it should be agreed in writing, proportionate and usually reduce over time.

References

  1. GOV.UK (2026). Employment contracts: written statement of employment particulars (opens in a new tab) ↑

  2. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  3. GOV.UK (2026). Maximum weekly working hours (opens in a new tab) ↑

  4. GOV.UK (2026). Maximum weekly working hours: calculating your working hours (opens in a new tab) ↑

  5. GOV.UK (2026). National Minimum Wage and National Living Wage rates (opens in a new tab) ↑

  6. GOV.UK (2026). Holiday entitlement (opens in a new tab) ↑

  7. GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑

  8. GOV.UK (2026). Workplace pensions: what you, your employer and the government pay (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo