Key takeaways
- Employers must manage the risks of lone working before people work alone, and the duty covers anyone contracted to work for you, including self-employed engineers[1].
- Firms with five or more workers must write down the findings of their risk assessment[2]. Smaller firms still need to do the assessment.
- Use a simple check-in procedure: departure, arrival, regular intervals on long jobs, finish and home, with a named person who acts on a missed check-in.
- Screen calls before sending anyone: address, who is there, any signs of conflict, access and parking.
- Write down that engineers may leave or refuse any job where they feel unsafe, without penalty.
Why night call-outs are different
In daylight, a plumber working alone in a customer's home is routine. At night the same job changes. The engineer is tired, the street is dark, the office is closed and nobody else knows exactly where they are. The customer may be stressed, there may be water near electrics, and the engineer might be in a loft or a cellar with a phone signal that comes and goes. Most night call-outs pass without incident, but when something does go wrong, from a fall to an aggressive householder, the time before anyone notices is what makes it serious.
What the law expects
HSE defines lone workers as those who work by themselves without close or direct supervision, and says employers must manage any health and safety risks before people work alone, including for self-employed people contracted to work for them[1]. Its guidance explains that employers' duties to lone workers come from the Health and Safety at Work etc Act and the Management of Health and Safety at Work Regulations, and that these responsibilities cannot be transferred to the person working alone[2]. Employers must assess and control the risks, and if they employ five or more workers, they must write down what they found[2].
Most plumbing and heating firms sit near that line. Around 95% of registered UK firms in the trade are micro businesses with fewer than ten employees[3], and only 2,270 have between 10 and 49[4]. Even if you have fewer than five workers and the written record is not required, the assessment itself is, and writing it down is the easiest way to show you did it.
A risk assessment for night call-outs
| Hazard | Who could be harmed and how | Controls to consider |
|---|---|---|
| Violence or aggression | Engineer threatened by an upset or intoxicated occupant | Screen calls, check-in system, permission to leave, no cash on the van |
| Electrical risk from water | Shock where water has reached sockets or fittings | Ask the caller to switch off at the consumer unit if safe; engineer checks before touching anything wet |
| Falls in lofts and cellars | Slips on ladders or wet floors in poor light | Head torch, ladder rules, no loft work alone if the hatch is unsafe |
| Gas and carbon monoxide | Exposure while investigating a heating fault | Personal CO alarm, follow the gas emergency procedure, never enter if gas is smelt |
| Driving tired | Collision on the way home after a late finish | Rest rules, later starts, option to stay local or be collected |
| Medical emergency | Engineer taken ill with nobody aware | Check-in intervals, location sharing, first aid kit |
HSE's guidance adds factors to consider when assessing lone working: violence, manual handling, whether the individual is medically suitable to work alone, whether the workplace itself presents a risk, training and experience, and how best to monitor and supervise[2].
Screen the call before anyone goes
The person who takes the emergency call is the first safety control. A few calm questions, asked as part of normal triage, give the engineer what they need to decide how to approach the job:
- Full address, including flat number, and the best way in.
- Who is at the property, and whether the caller will be there when the engineer arrives.
- Whether there is water near electrics, and whether the caller can switch off at the consumer unit.
- Whether anyone can smell gas. If yes, the gas emergency procedure applies first.
- Any dogs, and whether they can be shut away.
- Anything in the tone of the call that worries you, such as shouting in the background, which you note and pass on.
If something feels wrong, the engineer can ask for the call to be returned, or the firm can decline the job and suggest the caller contacts another service. That decision should never count against the engineer.
A check-in procedure that works
Departure
The engineer messages the named contact: address, expected arrival time and job description.
Arrival
A short 'arrived' message on reaching the property, before going in.
During long jobs
A check-in at pre-agreed intervals, such as every hour, especially in lofts, cellars or poor signal areas.
Finish
A 'leaving now' message when the engineer is back at the van.
Home
A final 'home' message. The contact does not sign off until it arrives.
HSE suggests procedures such as pre-agreed intervals of regular contact, devices designed to raise the alarm in an emergency, and a robust system to make sure a lone worker has returned home once work is complete[2]. A messaging group, a lone-worker app with location sharing or a simple call to the owner can all work, as long as someone is actually watching.
When a check-in is missed
- After a short grace period, the named contact calls the engineer's mobile twice.
- If there is no answer, they call the customer's number from the job details and ask whether the engineer is still there.
- If the engineer cannot be reached, the contact checks the engineer's shared location if available and calls the backup engineer or the owner.
- If there is still no contact and there is reason for concern, the contact calls the emergency services with the address and description.
- Every missed check-in is logged and reviewed the next day, even when it turns out to be a flat battery.
HSE advises regularly testing technical solutions and emergency procedures so lone workers can be reached if a problem is identified[2]. Run a test at the start of each winter.
The right to walk away
Engineers need to know, in writing, that they can leave or decline a job where they feel unsafe, without losing pay or facing criticism. Without that permission, people tend to stay in situations they should leave, especially when a customer is pleading for help with a flooding kitchen. HSE notes that some employers use dynamic risk assessments, where workers make decisions on the spot about risks that could not be foreseen, but that this is not a substitute for a proper risk assessment[2].
Policy wording you can adapt: 'If you feel unsafe at any point on a call-out, leave and tell the on-call contact. You will be paid for the call-out, and nobody will question your decision. We will contact the customer and arrange another approach.'
Kit for night work alone
- A fully charged phone and a power bank in the van.
- A head torch and a spare, so both hands are free on ladders.
- A personal carbon monoxide alarm for heating calls.
- A voltage tester and insulated tools for jobs where water has reached electrics.
- A first aid kit and the means to call for help from a loft or cellar.
- A lone-worker app or alarm device if your assessment shows it is needed.
Self-employed engineers on your rota
Nearly half of the UK's plumbers and heating installers are self-employed[5], and many firms rely on them for out-of-hours cover. HSE's duty to manage lone-working risks covers anyone contracted to work for you, including self-employed people[1]. Include them in the check-in procedure, share your risk assessment with them, and agree in writing who acts if they miss a check-in.
Training and review
A procedure that lives in a folder does not protect anyone. Walk every engineer and every on-call contact through it before their first on-call week, including what to do when a check-in is missed, and repeat the briefing each autumn. New and younger engineers deserve particular attention: they may be less confident about leaving a job or telling a customer no. Pair them with an experienced engineer for their first few night call-outs where you can. After any incident or near miss, from a confrontation on a doorstep to a slip on a wet cellar floor, talk it through as a team within a few days and update the risk assessment. HSE also recommends including lone workers in consultation on changes, because changes can affect them in ways office-based staff do not see[2].
Example: a missed check-in handled well
Example: a fictional engineer attends a leak at 10pm and messages 'arrived'. The agreed hourly check-in does not come. The owner, acting as on-call contact, calls twice without answer, then rings the customer, who says the engineer is in the loft fixing a tank and has no signal. The owner asks the customer to pass on a message, and the engineer calls back from the landing. Nothing was wrong, but the firm adds a rule for the future: before going into a loft or cellar with poor signal, the engineer sends a message saying so and when to expect the next check-in. For the hours side of night work, see on-call engineers and the Working Time Regulations.
Frequently asked questions
Is it legal for a plumber to work alone at night?
Yes. HSE says it will often be safe to work alone, but employers must assess and control the risks before people do so, including for self-employed people working for them.
Do small firms need a written lone-working risk assessment?
Employers with five or more workers must write down the findings. Smaller firms must still carry out the assessment, and writing it down is good practice.
How often should a lone engineer check in?
Agree intervals in your risk assessment: typically on departure, arrival, at regular intervals during long jobs, on leaving and on arriving home.
Can an engineer refuse a call-out they feel is unsafe?
Your policy should say clearly that they can leave or decline any job where they feel unsafe, without losing pay or facing criticism.
References
Health and Safety Executive (2026). Lone working: protect those working alone (opens in a new tab) ↑
Health and Safety Executive (2020). Protecting lone workers: how to manage the risks of working alone (INDG73 rev4) (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). Annual Population Survey - regional - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑