Landlord commercial work

Winning maintenance work from letting agents

How plumbing and heating firms win letting agent work: introductions, response promises you can keep, tenant communication and the invoices agents expect.

Ava research teamPublished 7 min read

On this page
  1. Why letting agents are worth the effort
  2. What agents are really worried about
  3. The trade they are choosing from
  4. Getting the introduction
  5. Response promises you can keep
  6. Invoices agents can pay without chasing
  7. Handling the tenant well
  8. Pricing agent work so it pays
  9. When to walk away
  10. Worked Example: from one trial to a regular panel
  11. Frequently asked questions
  12. References

Key takeaways

  • Letting agents want contractors who turn up, keep tenants informed and send invoices that match the works order first time.
  • Repair demand is real: 22% of private rented homes in England failed the Decent Homes Standard, the highest of any tenure[1].
  • Nearly half of UK plumbers and heating installers are self-employed[2], so agents juggle many small contractors; reliability is how you stand out.
  • Promise response times by job category and keep them, rather than promising same day for everything.
  • Make compliance paperwork fast: landlords must give tenants a gas safety record within 28 days of the check[3].

Why letting agents are worth the effort

A good letting agent relationship can fill the quiet weeks in your diary with steady, local work: leaks, boiler faults, dripping taps, blocked waste pipes, gas safety checks and the occasional bathroom refit. Agents managing dozens or hundreds of homes need someone they can send in without worrying, and when they find that firm they tend to stay with it.

The demand is there. In 2024, 22% of private rented homes in England failed the Decent Homes Standard, against 10% in the social rented sector[1]. Many of the defects behind those figures involve heating, hot water, damp and leaks, which are exactly the jobs a plumbing and heating firm does.

The catch is that agent work comes with conditions. Prices are often agreed in advance or capped, the paperwork is heavier, you deal with a tenant who is not your customer, and payment runs through the agent's systems. Firms that do well treat agents as a separate line of business with its own processes, rather than squeezing their jobs in between private customers.

What agents are really worried about

  • Contractors who accept a job and then do not turn up, leaving the agent to explain to an angry tenant.
  • Quotes that take a week, when the landlord wants an answer the same day.
  • Engineers who arrive without warning or leave without telling anyone what they found.
  • Invoices without a works order number, with vague descriptions, or for more than was approved.
  • Certificates that arrive late, putting the landlord in breach of a legal deadline.
  • Repeat visits for the same fault, which the landlord sees as paying twice.

Every one of these is a reason an agent drops a contractor. Solve them and the price becomes a smaller part of the decision.

The trade they are choosing from

Agents choose from a very fragmented trade. Around 148,600 people worked as plumbers and heating and ventilating installers in the UK in the year to June 2026[2], and about 71,200 of them, around 48%, were self-employed[2]. Many agents have a list of sole traders who are excellent but hard to reach when busy. A firm that can answer the phone, confirm jobs in writing and cover holidays has an advantage that has little to do with price.

UK plumbers and heating installers by employment type, July 2025 to June 2026Plumbers and heating and ventilating installers and repairers
UK plumbers and heating installers by employment type, July 2025 to June 2026Comparison. Self-employed: 71,200; Employees: 77,400.71,200Self-employedSelf-employed: 71,20077,400EmployeesEmployees: 77,400UK plumbers and heating installers by employment type, July 2025 to June 2026Comparison. Self-employed: 71,200; Employees: 77,400.71,200Self-employedSelf-employed: 71,20077,400EmployeesEmployees: 77,400

Source: Office for National Statistics (Nomis), 2026[2]

Show the data
ItemValue
Self-employed71,200
Employees77,400

Getting the introduction

  1. Pick the right agents

    Start with independent agents and branches that manage, not just let, properties within your normal travel area. Look at how many homes they advertise as managed.

  2. Find the property manager

    The person who allocates repairs is usually a property or maintenance manager, not the branch manager or the lettings negotiator.

  3. Send a short introduction

    Keep it to a few lines: what you do, the area you cover, your response categories, your registrations and insurance, and that you are happy to take a trial job.

  4. Offer a trial

    Ask for two or three routine jobs to prove yourself, rather than asking to be added to the panel straight away.

  5. Report back properly

    After the trial jobs, send a short summary: what you found, what you did, photos and invoices. This is your real sales pitch.

  6. Follow up

    A month later, ask how the jobs went and whether they would like you on their contractor list.

Example introduction: We are a Gas Safe registered plumbing and heating firm covering the town and the surrounding villages. We answer emergency calls the same day and quote routine jobs within two working days. We would be glad to take a couple of trial jobs so you can see how we work. Our insurance and certificates are attached.

Response promises you can keep

Example response categories to agree with an agent.
Job category (Example)Typical examplesWhat to promise
EmergencyNo heating or hot water in cold weather, uncontrolled leak, suspected gas or carbon monoxide issueMake safe the same day; agree a time on the phone
UrgentBoiler fault with a working backup, slow leak, single radiator outAttend within an agreed number of working days
RoutineDripping tap, running toilet, sticking valveBook within an agreed window and confirm with the tenant
ComplianceAnnual gas safety check, landlord inspectionsComplete before the due date and send the record the same day
QuotesBoiler replacement, bathroom works, larger repairsQuote within an agreed number of working days with photos

Agree the categories in writing with each agent, and make sure your office uses the same words. Gas safety work deserves particular care: landlords must have each appliance and flue checked at least every 12 months, and give the tenant a record before they move in or within 28 days of the check[4]. If your record reaches the agent late, the landlord carries the risk and you carry the blame.

Invoices agents can pay without chasing

  1. Works order number, exactly as the agent issued it.
  2. Property address and, if the agent uses them, the property or landlord reference.
  3. Date of attendance and the engineer's name.
  4. What was reported, what was found and what was done, in plain sentences.
  5. Labour and parts listed separately, with VAT shown if you are registered.
  6. Before and after photographs, and any certificate or record attached.
  7. Recommendations for further work, quoted separately rather than added to the invoice.

Send the invoice within a day or two of the job, while the details are fresh. If an agent pays late despite a clean invoice, remember that for business-to-business debts you can claim statutory interest of 8% plus the Bank of England base rate[5], though most firms find a polite reminder and a phone call work first.

Handling the tenant well

The tenant is not your customer, but they decide how the agent hears about your visit. Contact them before you arrive, using the details and method the agent provides, and confirm a time. Explain what you are going to do and how long it will take. When you leave, tell them what you found and what happens next, and then tell the agent the same thing. A tenant who feels informed rarely complains.

Calls from tenants and agents often arrive while you are on site. Some firms use an AI Employee such as Ava to answer, take the works order details and book access times, so the agent gets a confirmation even when every engineer is busy.

Pricing agent work so it pays

Agent jobs carry hidden time: arranging access with tenants, waiting for approval on anything over the agent’s limit, extra photographs, uploads and return visits when nobody is home. If you price an agent job like a private one, you will lose money on many of them without noticing.

  • Track the office minutes each agent job takes for a month, as well as the time on site.
  • Agree a charge for wasted visits when the tenant is not in, and get it in writing before the first job.
  • Set a clear approval threshold with each agent, above which you stop and quote.
  • Separate call-out, labour and parts so the agent can see what they are paying for.
  • Review each agent quarterly: volume, margin, payment days and how often you are kept waiting.

When to walk away

Not every agent relationship is worth keeping. If an agent regularly pays late, changes jobs without paperwork, asks you to cut corners on compliance or blames you for problems their own process causes, raise it once in writing. If nothing changes, step back politely. Your reputation with tenants and landlords is worth more than the volume.

Worked Example: from one trial to a regular panel

Example (fictional): a three-engineer firm sends an introduction to five managing agents in its town. Two reply; one offers three routine jobs. The firm confirms each job with the tenant by text, attends in the agreed window, and sends invoices with photos and the works order number the same evening.

In the Example, a month later the agent adds the firm to its approved list and starts sending gas safety checks for 40 properties. The firm builds an annual schedule, sends each record on the day of the check, and becomes the agent's first call for heating faults. For the next steps, see what agents ask of approved contractors and how to handle works orders and portals.

Frequently asked questions

How do I get work from letting agents as a plumber?

Approach property managers at agents that manage homes in your area, offer a few trial jobs, report back with photos and clean invoices, then ask to join their contractor list.

What response times do letting agents expect?

It varies by agent. Agree categories in writing, such as emergency, urgent, routine and compliance, and promise only what you can deliver in winter.

How quickly must gas safety records reach tenants?

Landlords must give tenants the record before they move in or within 28 days of the check[4], so send it to the agent the same day.

Can I charge interest if an agent pays late?

For business-to-business debts you can claim statutory interest of 8% plus the Bank of England base rate[5]. Check who your contract is with, the agent or the landlord, before you invoice.

References

  1. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑

  2. Office for National Statistics (Nomis) (2026). Annual Population Survey - regional - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

  4. GOV.UK (2026). Your landlord's safety responsibilities (opens in a new tab) ↑

  5. GOV.UK (2026). Late commercial payments: charging interest (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo