Key takeaways
- Design software has two jobs: produce a compliant, defensible design and turn it into a quote the customer understands.
- The four broad options are manufacturer tools, independent design suites, spreadsheet calculators and survey apps linked to quoting.
- Off-gas homes are a large share of grant work: 8,107 of 25,374 Boiler Upgrade Scheme applications in July to September 2026 were for the new off-gas grant[1].
- Trial any tool on a past job where you know the outcome before you trust it on a new one.
- Choose on accuracy, report quality, data export and support, not on the length of the feature list.
What design software has to do
A heat pump design stands or falls on the heat loss calculation. Get it wrong one way and the unit is oversized, short cycles and costs more than it should. Get it wrong the other way and the house is cold on the first frosty morning. Software does not remove the need for a careful survey, but it makes the calculation consistent, repeatable and easy to check.
Grant-funded work also needs paperwork that stands up. MCS heat pump notifications accounted for 60% of total UK heat pump sales in 2024[2], and certified installers are expected to show how they sized the system, chose the emitters, assessed noise and estimated performance. Good software produces that evidence as a by-product of doing the design.
There is also a skills angle. Just under 10,000 people completed a recognised heat pump training qualification in 2024[2], and many firms are bringing newly trained engineers into survey work. A tool that guides them through the right inputs, and flags unusual values, reduces the risk of a new surveyor's error going straight into a quote.
The main options compared
| Type | Strengths | Watch out for | Best for |
|---|---|---|---|
| Manufacturer design tools | Free, matched to that brand's units and cylinders, often include product selection | Tied to one brand; may not show working; reports vary in depth | Firms loyal to one manufacturer |
| Independent design suites | Room-by-room heat loss, emitter sizing, noise and performance in one place; brand-neutral | Subscription cost; learning curve; check how often they are updated | Firms doing regular grant-funded installs |
| Spreadsheet calculators | Cheap, transparent, easy to adapt | Easy to break; version control; looks less professional to customers | Low volume or very experienced designers |
| Survey apps linked to quoting | Fast on site, push results into quotes and job records | Design depth may be limited; check the calculations behind the screens | Firms prioritising speed from survey to quote |
Many firms end up using two: an independent or manufacturer tool for the design itself, and a survey or quoting app for capturing measurements and producing the customer document. That works, provided the numbers flow one way and nobody retypes them.
Features that matter for compliance
- Room-by-room heat loss with clear inputs for fabric, ventilation and design temperatures, and the ability to show the working.
- Emitter sizing at the design flow temperature, with each radiator marked keep, upsize or replace.
- A noise assessment for the outdoor unit position, using the unit's sound data and distances to assessment points.
- Hot water cylinder sizing based on occupancy and use.
- A seasonal performance estimate and running cost assumptions that can be shown to the customer.
- Version history, so you can show what the design looked like when the customer signed.
- Report output in a format your certification body and the customer can read.
If a tool cannot show you how it reached a number, you cannot defend that number to a customer or an assessor.
Features that matter for quoting
A design that takes two evenings to turn into a quote loses jobs. Look for tools that shorten the path from survey to signed quote without hiding the detail.
- Materials list generated from the design, including emitters, pipework, cylinder and controls.
- A quote template with the grant shown as a separate line and the conditions written in.
- Customer-friendly summary pages: what is changing, room by room, in plain English.
- Easy revisions when the customer changes their mind about a radiator or the cylinder position.
- Export to your job management or accounting system, so the quote becomes the job without retyping.
Booking software and CRM are already more common than AI among UK small employers that use digital tools[3], so check how the design tool connects with what you already run before adding another login.
Off-gas homes need extra care
A large share of grant work is in homes heated by oil or LPG. In July to September 2026, 8,107 of the 25,374 Boiler Upgrade Scheme applications were for the new off-gas grant[1]. These homes are often older, rural and less well insulated, and the customer's comparison is with an oil or LPG bill rather than mains gas.
- Off-gas grant applications 8,107 32%
- Other applications 17,267 68%
Source: Department for Energy Security and Net Zero, 2026[1]
Show the data
| Item | Value |
|---|---|
| Off-gas grant applications | 8,107 |
| Other applications | 17,267 |
Check that the software handles solid walls, suspended timber floors, rooms in roofs and high ventilation rates sensibly, and that its running cost comparison lets you enter oil or LPG prices rather than assuming mains gas. Off-gas jobs are also where the median installed cost matters most to the customer: £12,826 for an air-to-water system in mid-2026, including the grant[1].
Questions to ask a software supplier
- Which calculation methods and standards does the heat loss follow, and when were they last updated?
- Can I see and edit every assumption, including design temperatures and ventilation rates?
- Does the noise assessment use the specific unit’s published sound data?
- What does the customer report look like, and can I put my own branding and wording on it?
- How is my data stored, who can see it, and can I export everything in a usable format?
- What happens to my designs if I stop paying?
- How many users are included, and can a surveyor work offline on site with poor signal?
- What training is included, and how quickly does support answer technical questions in winter?
Write the answers down and compare them side by side. Suppliers tend to answer the easy questions on their website and leave the awkward ones to a sales call, and the awkward ones are usually about data, exports and support.
How to trial a tool properly
Shortlist two or three
One manufacturer tool, one independent suite and whatever your quoting app offers is a sensible spread.
Pick a past job
Choose a finished install where you know the real outcome: comfort, flow temperature and electricity use over a winter.
Re-run the design
Enter the same survey data in each tool, timing how long it takes.
Compare results
Look at total heat loss, room-by-room differences, emitter changes and unit size. Where tools disagree, find out why.
Check the outputs
Print the customer report and the compliance report. Would a customer understand one, and would an assessor accept the other?
Test the exits
Export the data. If you cancel the subscription, can you still get your designs out?
Ask support a hard question
Send a real technical query and judge the answer and the response time.
Worked Example: two tools, one semi
Example (fictional): a firm re-runs a three-bedroom semi it fitted last year. The independent suite gives a total heat loss within a few percent of the original design and flags that the original ventilation assumption for the kitchen was low. The manufacturer tool gives a similar total but picks a larger unit, because its product selection rounds up to the next model in its range.
The firm keeps the independent suite for design, uses the manufacturer tool only for product checks, and changes its survey form to capture ventilation details more carefully. The trial took an afternoon and changed how the firm surveys.
When a spreadsheet is still the right answer
Not every firm needs a subscription. If you design a handful of heat pumps a year, know the calculation method well and keep a locked, version-controlled template, a spreadsheet can be perfectly defensible. The risk is not the tool itself but the copies: an old version on a laptop, a formula overwritten to make one job work, a surveyor who does not understand what a cell is doing. If you stay with a spreadsheet, keep one master copy, protect the formulas, record the version on every design and have someone else check each one before it becomes a quote. Move to dedicated software once volume or staff numbers make that checking hard to sustain.
Quotes, records and the customer's rights
Keep every design version and survey photo against the property record. They answer the performance questions that come up in the first winter and they are the baseline for aftercare. Remember that quotes accepted at a distance or off premises usually carry a 14-day cancellation period for the customer[4], so date and store the accepted version and the customer's request if they want work to start sooner.
Choose the tool your team will actually use consistently. A good tool used carefully on every job beats a brilliant one used on half of them. Link it to performance monitoring after install and to your customer records so each design keeps paying back.
Frequently asked questions
Do I need paid software for MCS heat pump design?
No single product is required, but your design must be defensible: room-by-room heat loss, emitter sizing, noise and performance estimates with the working shown. Paid suites make that faster and more consistent.
Are manufacturer design tools good enough?
They can be, especially if you fit one brand. Check that they show their working, handle older properties sensibly and do not oversize by rounding up to their own models.
How should I compare heat loss software?
Re-run a past job with a known outcome in each tool, compare the results room by room and check the reports, data export and support before choosing.
Does design software handle off-gas homes?
Most do, but check it copes with solid walls, timber floors and high ventilation, and that running cost comparisons accept oil or LPG prices.
References
Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2024). Bumper year for UK heat pumps (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2013). The Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013, regulation 30 (opens in a new tab) ↑