Key takeaways
- Build records around the property and its appliances, then link people to it with a role such as owner, tenant, landlord or agent.
- Write job notes in four parts (reported, found, done, next) before the engineer leaves site, not at the end of the day.
- Landlords must have gas appliances checked at least every 12 months and keep the record until two further checks have been done[1]; reminders make this easy for them and for you.
- Keep only the personal details the job needs and lock the system down: 85% of UK businesses that had a breach or attack in 2025 experienced phishing[2].
Why job history saves time on every visit
An engineer who arrives knowing the boiler model, the last fault code, where the stopcock is and that the customer works nights fixes the fault faster and makes fewer return trips. Most plumbing and heating firms already hold this information somewhere: in a van diary, on an engineer's phone, in an old invoice or in the owner's head. The trouble is that none of those places is visible to the next person who takes the call.
A customer record puts that knowledge in one place the office and every engineer can see before they pick up the phone or knock on the door. This guide covers what to record for each property, how to write notes that help the next engineer, what the gas safety rules mean for landlord work, and how to keep the data lean and secure.
Record the property, not just the person
Customers move house, landlords own several properties and letting agents call on behalf of tenants. If your records are built around a person's name, the history of a boiler disappears when the house is sold, and a landlord with six flats ends up as six unconnected customers. Build the record around the address and its appliances instead, and link people to it with a role: owner, tenant, landlord, agent or key holder. The new owner's first call then starts with everything you already know about the system.
| Field | What to capture | Who updates it |
|---|---|---|
| Address and access | Parking, side gate, key holder, pets, best entrance | Office at booking; engineer corrects on site |
| Heating appliance | Make, model, fuel, location, install date, serial number, flue type | Engineer at first visit |
| Water system | Combi, system or open vented; stopcock location; cylinder; pressure notes | Engineer |
| Certificates | Gas safety record, commissioning record, building regulations notification, warranty registration | Office, from the engineer's paperwork |
| Job history | Date, engineer, fault, cause, parts used, outcome, follow-up needed | Engineer before leaving site |
| People and roles | Owner, tenant, landlord or agent; who pays; who receives reports | Office |
| Preferences | Contact times, preferred channel, language, adjustments the customer has asked for | Office, with the customer's agreement |
Writing notes the next engineer can use
Most job notes fail because they are written for the person who wrote them. 'Fixed, will need part' does not say which part, why it is needed or who is ordering it. A useful note answers four questions in order: what the customer reported, what the engineer found, what was done and what happens next. Here is the shape of a note that works:
- Reported: no hot water since Sunday, heating working.
- Found: diverter valve sticking; system pressure low, topped up to normal working pressure.
- Done: freed the valve as a temporary fix; advised replacement; customer agreed to a quote.
- Next: office to send a quote for a new diverter valve; engineer to bring the part if accepted.
Make it a house rule that notes are written before the engineer leaves the property. Photos of the appliance data plate, the flue terminal and anything unusual are worth more than a paragraph, so ask engineers to attach them to the job and caption them by what they show rather than leaving them as camera numbers.
Example: 'Customer's dog is nervous of visitors; ask her to put it in the garden before you come in' is exactly the kind of detail that makes the next visit go well. It belongs in the access notes, where every engineer will see it, not buried in a job description from last winter.
Gas safety and landlord records
For rented homes, the record is a legal matter as well as good service. Landlords must have each gas appliance and flue checked within 12 months of installation and then at intervals of no more than 12 months[1]. The same regulation requires the landlord to keep the record until two further checks have been carried out[1], and tenants must receive a copy before they move in or within 28 days of the check[3].
You are not the landlord, but landlords and agents rely on you to make those deadlines painless. Store the date of each check against the property, set a reminder well before the anniversary, and send the record to the named landlord contact as soon as it is complete. A record that lists every appliance with its last check date turns an annual scramble into a routine booking you can plan around quieter weeks.
Benchmark has changed too. The paper commissioning checklist and service record is no longer maintained, and the record has moved online and into the Benchmark apps[4]. Copy the Benchmark reference into your own property record so that an engineer attending a warranty fault can see the commissioning details without phoning the manufacturer or hunting through a drawer.
Access notes and personal details: keep only what you need
Access information is useful, but it is personal data. UK GDPR requires personal data to be kept in a form that identifies people for no longer than is necessary for the purpose it was collected for[5]. In practice that means recording what helps you do the job, writing it factually and reviewing it on a schedule.
- Record facts the engineer needs, such as 'use the side gate, customer gives the code on the day', not opinions about the customer.
- Keep key safe and alarm codes out of free-text notes. Ask for them on the day, or hold them in a restricted field that only the assigned engineer can see, and clear it after the job.
- If a customer mentions a health condition so you can adjust the visit, record the adjustment ('call half an hour ahead, customer needs time to reach the door') rather than the condition itself.
- Decide how long you keep records for former customers, write the rule down and archive or delete on that schedule.
Keeping the records safe
A single shared login to the job system, or a spreadsheet emailed between the office and the vans, puts every customer's address and access notes at risk. Attacks on small firms are routine rather than rare: 43% of UK businesses reported a breach or attack in the year before the 2025 government survey, and 85% of the businesses that had a breach or attack experienced phishing[2].
Awareness of basic protection is low among the smallest firms, with only 9% of micro businesses aware of the government's Cyber Essentials scheme[2]. The basics cost little: one login per person, two-step sign-in on email and the job system, engineers' phones locked with a PIN, and access removed on the day someone leaves the business.
Choosing where the records live
A spreadsheet can work for a sole trader with a few hundred regular customers. Once two or more people book work, a job management system or CRM earns its place, because the record, the diary and the paperwork live together. Among UK SME employers that use software, booking systems and CRM are more common than AI tools[6], so there is a mature choice of trade-friendly products. For a side-by-side comparison, see choosing a CRM for a trade business. Whatever you pick, test it against these criteria:
- Engineers can read and add to the record on a phone, including with poor signal in a loft or cellar.
- Records are built around the property, with several contacts and roles per address.
- Certificates and photos attach to both the job and the property.
- Reminders can be set per appliance for services and landlord checks.
- Each user has their own login, and you can export all of your data if you ever switch.
A 30-day plan to get records in order
Week 1: agree the template
Start from the table above. Decide which fields the office must fill at booking and which the engineer completes on site, and remove anything nobody will use.
Week 2: capture as you go
Every job this week updates its property record. Do not try to back-fill years of paperwork in one sitting; live jobs give you the most useful records first.
Week 3: load the landlord list
Enter every rented property you look after with the date of its last gas safety check, the landlord or agent contact and a reminder for the next one.
Week 4: tidy and secure
Merge duplicate customers, move codes out of notes, give each person their own login and switch on two-step sign-in.
Every month after: spot-check
Pick five recent jobs and read the notes as if you were the next engineer. If you would still need to ring the customer to understand the job, the note is not good enough yet.
Example: what a good record changes
Example: a fictional two-van heating firm in Leeds keeps customer details in a shared spreadsheet and job details on engineers' phones. A tenant rings about a fault code on her boiler. The office can see the address but not the boiler model, so the engineer arrives without the likely part and has to return two days later. After switching to property-based records, the next call about the same boiler shows the model, the last service date and a photo of the data plate. The engineer brings the part, fixes it first time, and the landlord receives the job sheet the same afternoon. Nothing about the engineer's skill changed; the information simply reached him before he did.
Frequently asked questions
How long should a plumbing firm keep customer records?
There is no single retention period for trade job records. UK GDPR says personal data should not be kept longer than necessary for its purpose[5], so set your own policy based on warranty periods, tax record rules and how long customers usually come back, write it down and apply it.
Do I need to keep copies of landlord gas safety records?
The landlord must keep the record until two further checks have been done[1]. Keeping your own copy linked to the property makes it easy to resend when a landlord or agent asks and helps you plan the next check.
Where has the paper Benchmark book gone?
The paper Benchmark commissioning checklist and service record is no longer maintained; the record is now online and in the Benchmark apps[4]. Store the reference in your own property record.
Is it safe to keep key safe codes in a job system?
Avoid putting codes in free-text notes that everyone can read. Ask for the code on the day, or use a restricted field that only the assigned engineer can see, and clear it once the job is done.
References
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑
Department for Science, Innovation and Technology (GOV.UK) (2025). Cyber security breaches survey 2025 (opens in a new tab) ↑
GOV.UK (2026). Your landlord's safety responsibilities (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2026). Benchmark goes digital - what homeowners need to know (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2016). UK General Data Protection Regulation, Article 5 (principles relating to processing of personal data) (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑