Key takeaways
- Ofgem now regulates heat networks in England, Scotland and Wales, and operators must register by 26 January 2027[1].
- The Energy Act 2023 gives government powers to designate heat network zones in England, with pilot areas already being progressed[2].
- Most plumbing work is on the customer side: heat interface units, in-home pipework, radiators, controls, hot water and meters.
- Operators will push new technical, metering and billing standards down to their contractors, so good records and low return temperatures become selling points[3].
- Contract work for operators and managing agents usually falls under the Construction Industry Scheme, so register and plan for deductions[4][5].
What a heat network is, and why it matters now
A heat network supplies heating, cooling or hot water from a central source to more than one property[1]. It might be a boiler house serving a block of flats, a plant room feeding a new estate, or a larger district scheme using waste heat or large heat pumps. Each home usually has a heat interface unit, or HIU, which takes heat from the network and delivers it to the radiators and taps.
Heat networks have been around for decades, but two changes are bringing them into the mainstream. First, Ofgem now regulates heat networks in Great Britain, with rules on customer service, fair pricing and clear bills, and operators and suppliers must follow authorisation conditions and register by 26 January 2027[1]. Second, the Energy Act 2023 gives government the powers to designate zones in England where heat networks are the lowest-cost, low-carbon heating option, and some pilot areas are being progressed ahead of the legislation coming into force[2].
How homes are heated today
Heat networks are a small part of the picture for now. At the 2021 Census, mains gas was the central heating type for 73.8% of households in England and Wales[6]. Heat networks sit within the remainder alongside oil, LPG, solid fuel and renewables. That makes them a niche today, but a niche with growing regulation, new zones and a lot of existing HIUs that need looking after.
Where plumbers fit
| Work type | Typical client | Skills needed |
|---|---|---|
| HIU servicing and repair | Network operator, housing association, managing agent | Plate heat exchangers, valves, controls, meter reading |
| Secondary-side pipework and radiators | Operator, landlord or resident | Wet heating, balancing, low-temperature design |
| Hot water problems in flats | Operator or managing agent | HIU hot water settings, thermostatic valves, legionella awareness |
| Leak investigation and repair | Operator, building manager | Fast response, access, isolation procedures |
| New connections on a network | Developer, operator or main contractor | First fix, HIU installation, commissioning to the operator's standard |
| Meter installation and replacement | Operator or metering provider | Approved procedures, records, customer communication |
The common thread is that you work on the customer side of a system owned by someone else. The operator sets the rules, specifies the equipment and expects detailed records. Get used to working to their procedures rather than your own preferences.
Servicing an HIU properly
- Isolate safely using the operator's procedure, and confirm which side of the HIU is the network and which is the home.
- Clean strainers on the primary and secondary sides; blocked strainers are a common cause of poor heat and slow hot water.
- Check the plate heat exchanger performance and look for signs of scaling on the hot water side.
- Check valves, actuators and the controller, and that settings match the operator's specification.
- Check hot water temperature at the outlets and the time it takes to arrive.
- Record the primary return temperature under load; high return temperatures waste the network's capacity.
- Read and record the heat meter, and check its seals and display.
- Look for leaks and weeping joints on both sides and in the meter cupboard.
- Leave a dated record with readings for the operator and, where they want it, a note for the resident.
On a heat network, the return temperature is a performance measure. An HIU that sends water back too hot costs the operator money, and operators are starting to pay attention.
Why return temperature matters
A heat network works best when water comes back to the plant room much cooler than it went out. Low return temperatures let the network carry more heat with the same pipes and pumps, cut heat losses and help heat pumps and other low-carbon sources run efficiently. Badly set HIUs, bypasses left open, oversized radiators running fast and poorly balanced systems all push return temperatures up.
For a plumber, that turns the secondary side into a skilled job. Balancing radiators, setting thermostatic valves, checking bypasses and adjusting HIU settings to the operator's specification can make a measurable difference to the network and to residents' bills. Put return temperatures on your service records and you have evidence to show the operator.
The new regulatory regime
Regulation brings standards. The government published heat network metering and billing regulations on 11 February 2026 and technical standards guidance on 16 February 2026[3]. Ofgem's role covers customer service, fair pricing and transparent bills, with registration covering organisation, ownership, financial resilience and consumer protection[1]. Operators will meet many of these obligations through their contractors.
- Expect operators to ask for evidence of competence on HIUs, metering and the specific equipment they use.
- Expect service levels written into contracts, including response times for loss of heat or hot water.
- Expect detailed digital records of every visit, readings and parts used.
- Expect residents to complain to the operator, and the operator to ask you for the facts quickly.
- Expect more scrutiny of meter work, because billing depends on it.
Working with residents
Most heat network customers did not choose their heating and many do not understand it. They see a cupboard with pipes, a meter and a bill from a company they may never have heard of. When something goes wrong, the engineer at the door is the only person they can ask.
- Explain in one or two sentences what the HIU does and what you are checking.
- Tell residents if their settings or habits are affecting performance, without lecturing them.
- Leave a short note of what you found and who to contact, using the operator’s approved wording.
- Never comment on tariffs or bills beyond saying who to ask; that is the operator’s responsibility.
- Report vulnerable residents or welfare concerns through the operator’s procedure.
Operators increasingly judge contractors on complaints and resident feedback as well as technical results. A courteous, clear engineer reduces the calls they have to handle, and that is noticed when contracts come up for renewal.
Winning heat network contract work
Find the operators
Identify who runs heat networks in your area: councils, housing associations, energy companies, managing agents and private operators of new-build schemes.
Prepare a contractor pack
Insurances, Gas Safe and other registrations, health and safety documents, HIU training, references and your out-of-hours arrangements.
Start with a trial
Offer to take a small block or a batch of servicing to prove your quality and records.
Report well
Send clear, consistent reports with readings. Operators keep contractors who make their regulatory life easier.
Plan for out of hours
Loss of heat in a block of flats in winter is urgent. Agree what you can cover and be honest about it.
Worked Example: a block of 80 flats
Example (fictional): a housing association has a block of 80 flats on a communal heat network with ageing HIUs and frequent complaints about slow hot water. It asks a local heating firm to service a first batch of 20 units.
In the Example, the firm finds blocked secondary strainers in most of them, several HIUs with bypasses left open after earlier repairs, and hot water settings that differ from the manufacturer's specification. It cleans, resets and records primary return temperatures before and after. The association sees fewer complaints from that batch, awards the firm the remaining 60 units on an annual contract, and asks it to quote for meter replacements across the block.
Getting ready
Heat networks will not replace your boiler and heat pump work, but they add a steady contract stream in towns with blocks, estates and new zones. Train one engineer on HIUs, get your CIS status in order, and talk to local operators before the regulation pushes them to rationalise their contractor lists. For the wider low-carbon picture, see our guides to the Future Homes Standard and marketing low-carbon heating honestly.
Frequently asked questions
Who regulates heat networks?
Ofgem regulates heat networks in England, Scotland and Wales. Operators and suppliers must follow authorisation conditions and register by 26 January 2027[1].
What is heat network zoning?
A process for identifying and designating zones in England where heat networks are the lowest-cost, low-carbon heating option, using powers in the Energy Act 2023[2].
What is an HIU?
A heat interface unit takes heat from the network and delivers it to a home's heating and hot water, usually through a plate heat exchanger, valves and a controller.
Does heat network contract work fall under CIS?
Usually. The Construction Industry Scheme covers installing heating systems, so most subcontract work for contractors falls under it[4].
References
Ofgem (2026). Heat networks (opens in a new tab) ↑
Department for Energy Security and Net Zero (GOV.UK) (2026). Heat network zoning (opens in a new tab) ↑
Department for Energy Security and Net Zero (GOV.UK) (2026). Heat networks: overview (opens in a new tab) ↑
GOV.UK (2026). What is the Construction Industry Scheme (opens in a new tab) ↑
GOV.UK (2026). What you must do as a CIS subcontractor: get paid (opens in a new tab) ↑
Office for National Statistics (2021). Housing, England and Wales: Census 2021 (opens in a new tab) ↑