Key takeaways
- The law ties gas work to competence for the specific work, so domestic registration does not cover commercial plant[1].
- Most of the domestic gas guidance in Approved Document J stops at 70kW net input[2]; commercial plant rooms follow other standards your training must cover.
- Commercial clients are usually bigger than you, and late payment is the most common obstacle for construction SMEs[3].
- Read payment terms, retentions and CIS deductions before you price, not after you invoice[4].
Why commercial gas looks attractive
Commercial gas work offers things domestic work struggles to: planned maintenance contracts, larger jobs, fewer one-off customers and work that does not depend on a homeowner's budget. Schools, offices, care homes, restaurants and blocks of flats all run plant that needs servicing, repairs and eventually replacement. For an established domestic firm, the jump can look natural: the gas is the same, the principles are the same, and some customers already ask whether you can look at the boiler at their business.
The jump is real, though. The plant, the standards, the paperwork and the commercial terms all change, and firms that treat commercial work as big domestic work tend to find out the hard way. This guide covers the main differences and a sensible route in.
Competence and registration
Regulation 3 of the Gas Safety (Installation and Use) Regulations 1998 says nobody may carry out work on a gas fitting unless competent to do so, and that employers and self-employed people may only do gas work if they belong to a class of persons approved by the HSE[1]. In practice that means Gas Safe Register[5]. Employers must also make sure their employees are competent for the work they are given[1].
Competence is specific to the work. Gas Safe registration lists domestic and non-domestic work separately, and within each, the appliance types you are assessed for. A domestic engineer moving into commercial work needs the commercial core assessment and the appliance and activity categories for the work they intend to take on, assessed through an accredited centre. Plan which categories you need for your target customers rather than collecting every one: a firm aiming at catering kitchens needs a different set from one aiming at school boiler houses.
What changes in the plant room
The guidance most domestic engineers know best has a ceiling. Approved Document J's additional provisions for gas appliances cover those with a rated input up to 70kW net, and the British Standards it lists for boilers and flues, BS 6798 and BS 5440, are also written for appliances up to 70kW net[2]. Above that size you are working to other standards and to the manufacturer's commercial installation instructions, and your training should cover them.
- Plant rooms with combustion and ventilation requirements set for the total installed input, not a single appliance.
- Multiple boilers on a common flue or header, with sequencing controls.
- Larger pipework, meters and sometimes boosters, with tightness testing and purging procedures to match the installation volume.
- Safety interlocks, such as ventilation fan and gas valve interlocks in plant rooms and commercial kitchens.
- Permits to work, method statements and site inductions before you touch anything.
Domestic and commercial work compared
| Area | Domestic | Commercial |
|---|---|---|
| Customer | Homeowner or landlord | Facilities manager, main contractor or managing agent |
| Paperwork before work | Quote and acceptance | Risk assessment, method statement, permit, induction |
| Testing | Domestic tightness test | Procedures sized to the installation, often with purging |
| Payment | Often on completion | Monthly applications, longer payment terms, retentions |
| Records | Gas safety record or commissioning checklist | Job sheets, asset registers, compliance logs for the client |
None of these are reasons not to do commercial work. They are reasons to price it differently, staff it differently and set aside more office time per job than you would for a boiler swap.
Who you will be selling to
Most plumbing and heating firms are small. Of the UK's 47,910 registered plumbing, heating and air-conditioning enterprises, 45,370 were micro businesses with fewer than ten employees in 2026[6]. Only 2,270 had 10 to 49 employees and 250 had 50 to 249[7]. Commercial work often comes through those larger firms, through facilities management companies or through main contractors, which means you may be the subcontractor rather than the contractor.
Being the smaller party changes the risk. The contract will usually be theirs, the payment terms will be theirs, and disputes will be on their paperwork. Treat contract review as part of the estimating time.
Contract terms that catch new entrants
Late payment is the obstacle construction SMEs mention most: 45% of construction SME employers named it as a major obstacle in 2025, up from 36% in 2024 and the highest of any sector[3]. You can charge statutory interest of 8% above the Bank of England base rate on late business-to-business payments[8], but cash flow suffers long before interest arrives. If you work as a subcontractor, the Construction Industry Scheme will usually apply, with 20% deducted from a registered subcontractor's payments, or 30% if you are not registered or cannot be verified[4].
- Payment terms: how many days, and from what date: invoice, valuation or the client paying the main contractor?
- Retentions: what percentage is held back, for how long, and what releases it?
- Variations: who can instruct extra work, and must it be in writing before you start?
- Liability caps and indemnities: are you accepting risks your insurance does not cover?
- Programme penalties: do delays caused by others fall on you?
- Access and out-of-hours work: is it priced, and who provides the site contact?
Example: a first plant room contract
Example (fictional): a four-engineer domestic firm is invited by a local facilities company to service the boilers at three primary schools. One engineer has completed the commercial assessments; the others have not. The firm agrees to take the contract only for the boiler servicing that engineer is assessed for, with the second engineer attending as a labourer, not working on the gas.
Before signing, the director reads the subcontract and finds 60-day payment terms from the date the school pays the facilities company. She negotiates 30 days from invoice, confirms CIS registration, and asks for site inductions to be booked before the first visit. The first quarter's work is profitable, mainly because none of it was priced as domestic work.
Pricing commercial work properly
The most common mistake in a first commercial contract is pricing the time on the spanners and forgetting everything around it. A plant room service can take longer to arrange than to carry out. Build each of these into your rates or your quote before you commit, and track them on the first few jobs so your estimates improve.
- Site induction and sign-in time, which can be an hour before work starts on a first visit.
- Waiting time for keys, permits, access to roof plant or a caretaker to isolate a supply.
- Travel and parking in town centres, including permit costs where the client does not provide a space.
- Office time for method statements, risk assessments, job sheets in the client's format and monthly applications.
- Out-of-hours premiums where schools, kitchens or offices can only release plant before opening or during holidays.
- Finance cost of waiting for payment, especially where retentions are held for months.
Do not compete on rate alone. Facilities companies value a subcontractor who turns up inducted, completes the paperwork correctly the first time and reports defects clearly. That is worth pricing for, and it is what wins the next contract.
A route into commercial work
Pick your target work
Decide which customers and plant you want, such as school boiler houses, catering kitchens or small commercial boilers.
Get the right assessments
Book the commercial core and only the categories that work needs, then update your Gas Safe registration.
Gain supervised experience
Work alongside an established commercial firm or engineer before taking sole responsibility for a plant room.
Check insurance and kit
Confirm public liability and professional cover for commercial sites, and buy test equipment suited to larger installations.
Start small
Take servicing and repair work before installation contracts, and keep the first contracts short.
Review the numbers
After three months, compare time on site, office time and payment days against your estimates.
Is it right for you?
Commercial gas suits firms with an engineer who wants to specialise, an office that can handle method statements and monthly applications, and enough cash to wait for payment. It suits firms less if every engineer is already fully booked on domestic work, or if one late payment would cause a problem with wages. The work is there, but it rewards preparation more than enthusiasm.
Frequently asked questions
Does domestic Gas Safe registration cover commercial boilers?
No. Registration lists domestic and non-domestic work separately, and you need to be assessed and registered for the commercial work you do.
Which standards apply above 70kW?
Approved Document J's gas guidance and the domestic boiler and flue standards it lists stop at 70kW net input. Larger plant follows commercial standards and manufacturers' instructions, which commercial training covers.
Can I charge interest if a commercial client pays late?
Yes. Statutory interest of 8% above the Bank of England base rate can be charged on late business-to-business payments.
Will CIS apply to commercial gas work?
Usually, if you are working as a subcontractor on construction work. Register so deductions are 20% rather than 30%.
References
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑
GOV.UK (Ministry of Housing, Communities and Local Government) (2022). Approved Document J: Combustion appliances and fuel storage systems (2010 edition incorporating 2010, 2013 and 2022 amendments) (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑
GOV.UK (2026). What you must do as a CIS subcontractor: get paid (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
GOV.UK (2026). Late commercial payments: charging interest (opens in a new tab) ↑