Key takeaways
- The owner must receive enough information to run the system efficiently within five days of completion, in a form that is easy to understand and specific to the home[1].
- Most early callbacks are about controls and pressure, not faults, so spend the handover on what the customer will touch.
- Few people use connected heating controls[2]; set them up with the customer rather than leaving an app to download.
- Register the warranty, book the first service and get consent for reminders before you leave[3].
Why the handover decides the review
A customer judges a new boiler by the first cold evening. If the heating does not come on when they expect, the pressure gauge looks different from the old one or the display shows a code they do not understand, they ring you, and that call shapes what they write in their review. Most of those calls are not faults. They are gaps in what the customer was shown on the day.
A structured handover takes about fifteen minutes and saves far more than that in return visits. It also covers what building regulations expect you to leave with the owner, and it is your best chance to set up the annual service that keeps the customer with your firm.
What the regulations expect you to leave
Regulation 40 of the Building Regulations requires the person carrying out the work to give the owner, no later than five days after completion, enough information about the fixed building services and their maintenance for the home to be run without using more fuel and power than is reasonable[1]. Approved Document L says operating and maintenance instructions should be easy to understand, specific to the dwelling, durable and in an accessible format[1]. A manufacturer's booklet in a drawer meets part of that; a short explanation, a one-page summary for this home and the commissioning record meet the rest.
The Benchmark commissioning checklist and service record has moved online and to the Benchmark apps, and the paper version is no longer maintained[4]. Show the customer how they can see their record, because they will need it for warranty claims and when they sell the house.
A 15-minute handover script
Switching on and off
Show the boiler's main controls, what the display shows in normal running and how to switch heating and hot water separately.
Pressure
Point to the gauge, mark the normal cold range on it or on the summary sheet, and show how to top up if the system has a filling loop.
Programmer and thermostat
Set the customer's actual routine with them, then let them change one setting themselves while you watch.
Radiator valves
Explain what the numbers on thermostatic valves mean and that turning them to maximum does not heat a room faster.
Fault codes and resets
Show where the code list is, which codes they can reset and which mean they should call you.
Cold weather
Explain what to do if the condensate pipe freezes, using the manufacturer's advice, and where the pipe runs.
Carbon monoxide
Show the alarm, how to test it and what to do if it sounds.
Warranty and service
Register the warranty, tell them the service interval it requires and book the first service.
Carbon monoxide in plain words
Customers should leave knowing that a boiler can produce carbon monoxide if it is badly installed, faulty or poorly maintained; the NHS lists gas boilers among the appliances that can[5]. If they suspect carbon monoxide poisoning, the NHS advice is to stop using the suspect appliance and get medical advice[6]. Put that on the summary sheet alongside the alarm's location and test button, and explain that the annual service is part of keeping the risk low.
Keep the tone calm. The aim is a customer who knows what the alarm is for and what to do, not one who is frightened of a new appliance you have just commissioned safely.
Set up the controls with the customer
Connected heating controls are more common than they were, but many people still do not use them. In early 2020 only 18% of adults in Great Britain used internet-connected energy or lighting controls, rising to 26% of those aged 35 to 44[2]. If you fit a smart thermostat, set it up on the customer's own phone during the handover rather than leaving a leaflet with a download code.
Source: Office for National Statistics, 2020[2]
Show the data
| Item | Value |
|---|---|
| All adults | 18% |
| Aged 35 to 44 | 26% |
For customers who do not want an app, set a sensible programme on the wall controller and write it on the summary sheet. Explain that a modern condensing boiler runs most efficiently at the lowest flow temperature that keeps the home comfortable, and show them where that setting is if you have left it adjustable.
What to show, what to say
| Show | Say | Call it prevents |
|---|---|---|
| Pressure gauge | This is the normal range when cold; it rises a little when hot | My boiler pressure has gone up |
| Hot water priority on a combi | Heating pauses while you run a tap; that is normal | The radiators keep going cold |
| Programmer | These are your times; change them like this | The heating will not come on |
| Thermostatic valves | Set the number for the room you want; maximum does not heat faster | The bedroom is too hot |
| Display codes | These you can reset; these need us | There is a code on the screen |
Use the same wording in the office. If the customer rings with one of these questions, whoever answers, whether a colleague or an assistant such as Ava on your out-of-hours line, should give the same answer the engineer gave at handover, and log the call so the engineer can follow up if it turns out to be a real fault.
Warranty, service dates and reminders
Most boiler warranties depend on registration within a set period and on annual servicing. Register the warranty during the handover where you can, give the customer the confirmation and tell them plainly that skipping services may affect it. Book the first service before you leave, ideally in a quieter month.
Reminders are part of the service, but direct-marketing emails and texts to individuals need their consent unless the soft opt-in applies to existing customers[3]. Ask the customer how they would like to be reminded, record their answer and include an easy opt-out in every message.
Landlord and tenant handovers
When the customer is a landlord, the person living with the boiler is someone else. Landlords must have each gas appliance and flue checked within 12 months of installation and at least every 12 months after[7], so put the first check date on the paperwork. Offer to do a short handover with the tenant as well, because the tenant's calls are the ones that will reach you first.
The follow-up a week later
A short call or message about a week after the install catches small problems before they become complaints. By then the customer has lived with the boiler through a few cold mornings and knows whether the programme suits them. Keep it to three questions so it takes two minutes and feels like care rather than a sales call.
- Is the heating coming on when you expect it to, and are all the rooms warm enough?
- Has the pressure gauge stayed in the range we marked, and have you seen any codes on the display?
- Is there anything about the controls you would like us to go through again?
Log the answers on the job. If a room is cold, offer to rebalance it at no charge; if the customer is struggling with the controls, book a short visit or a video call. This is also the natural moment to ask for a review, once you know they are happy.
Example: the evening call that did not happen
Example (fictional): a firm reviewed its first-month callbacks for new boilers and found that most were about pressure readings, hot water priority on combis and programmers left on factory settings. It added the eight-step script to every install, a one-page summary sheet with the home's settings and a follow-up text after a week asking whether everything was working as expected.
Over the next season, callbacks in the first month fell noticeably and more customers booked their first service at handover. The firm also gave its out-of-hours line the same answers as the summary sheet, so a normal pressure rise was explained on the phone and logged for the morning instead of triggering a visit.
The leave-behind pack
- One-page summary: settings, normal pressure range, what to do in a fault and your contact details.
- Manufacturer's user instructions and warranty confirmation.
- Access to the digital Benchmark record.
- Competent person scheme certificate, sent when issued.
- First service date and how reminders will reach them.
- Carbon monoxide alarm location, test instructions and expiry date.
Every service you provide includes a term that it is carried out with reasonable care and skill[8]. A consistent handover, recorded on the job sheet, is part of showing that you met it.
Frequently asked questions
How soon must I give the owner information about the new system?
Building regulations require it within five days of completing the work, in a form that is easy to understand and specific to the home.
Should I set up the customer's smart thermostat app?
Yes, if they want to use it. Setting it up on their phone at handover avoids many early calls.
What should I tell customers about carbon monoxide?
Where the alarm is, how to test it, and that if they suspect carbon monoxide they should stop using the appliance and get medical advice.
Can I text reminders for the annual service?
Yes to existing customers under the soft opt-in, as long as they had a chance to opt out and can opt out of every message.
References
GOV.UK (Ministry of Housing, Communities and Local Government) (2023). Approved Document L, Volume 1: Dwellings (2021 edition incorporating 2023 amendments) (opens in a new tab) ↑
Office for National Statistics (2020). Internet access - households and individuals, Great Britain: 2020 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2003). The Privacy and Electronic Communications (EC Directive) Regulations 2003, regulation 22 (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2026). Benchmark goes digital - what homeowners need to know (opens in a new tab) ↑
NHS (2026). Carbon monoxide poisoning (opens in a new tab) ↑
NHS (2026). Carbon monoxide poisoning (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 49 (opens in a new tab) ↑