Key takeaways
- Separate the manufacturer's warranty on the boiler from your own legal duty for the installation; customers often confuse the two.
- Triage every warranty call: is it the appliance, the installation or the system? That decides who attends.
- If your installation work was faulty, the customer can require you to put it right within a reasonable time and at your cost.
- Protect warranties by registering boilers, completing the digital Benchmark record and keeping service history.
Two different promises
When a boiler that is a couple of years old breaks down, the customer usually rings the installer and says 'it's under warranty'. That sentence hides two separate promises. The manufacturer's warranty is a promise from the manufacturer about the appliance, usually with conditions such as registration and annual servicing. The installer's obligations come from the contract and from consumer law, and cover the installation work: pipework, flue, controls, commissioning and the care taken.
| Aspect | Manufacturer warranty | Installer obligations | Boiler cover or insurance |
|---|---|---|---|
| Who gives it | The boiler manufacturer | The firm that fitted it | An insurer or cover provider |
| What it covers | Faults in the appliance itself, under its terms | The installation work and the way it was carried out | Whatever the policy says |
| Typical conditions | Registration, annual service by a qualified engineer, genuine parts | Reasonable care and skill; what you told the customer | Excesses, exclusions, claim limits |
| Who the customer calls | Manufacturer's service line, or installer as first contact | The installer | The cover provider |
Being clear about this helps customers and protects you. Firms that treat every breakdown as their own warranty problem end up doing unpaid work on manufacturer faults. Firms that tell every caller to ring the manufacturer leave customers stranded when the fault is actually the installation.
What the installer owes in law
Every contract to supply a service includes a term that the trader must perform it with reasonable care and skill[1]. If installation work does not meet that standard, the customer has a right to require the trader to perform the service again, to the extent needed to put it right[2]. The trader must do this within a reasonable time and without significant inconvenience to the consumer, and must bear any necessary costs, including labour and materials[2].
That duty applies whatever the manufacturer's warranty says. A leaking compression joint on the flow pipe, a condensate pipe run without enough fall, or controls wired wrongly are installation faults. They are yours to fix, at your cost. A failed fan, PCB or diverter valve in an otherwise properly installed boiler is usually an appliance fault and a matter for the manufacturer's warranty.
Rule of thumb: if the fault is inside the casing and the installation is sound, it is probably the manufacturer's. If it is outside the casing or caused by how the boiler was fitted, it is probably yours.
Triage: who calls whom
Take the details
Boiler make and model, installation date, fault code, symptoms, when it started and whether the boiler has been serviced since installation.
Check your records
Is the boiler registered with the manufacturer? Is the digital Benchmark record complete? Was the last service done and recorded?
Rule out simple causes by phone
Low pressure, a frozen condensate pipe or a tripped supply can often be talked through safely and fix the problem without a visit.
Decide who attends
If an installation fault is plausible, send your engineer. If it is clearly an appliance fault, either log it with the manufacturer on the customer's behalf or give them the number and the details they will need.
Tell the customer what happens next
Who will attend, roughly when, and whether there could be a charge if the fault turns out not to be covered.
Follow up
Check the visit happened and the problem is fixed; customers judge the installer on the outcome, whoever attended.
Many installers choose to be the customer's single point of contact even for manufacturer faults, logging the claim and chasing it. That costs some office time but keeps the relationship, and it is often how a breakdown turns into a loyal customer.
Protecting the warranty from day one
Many warranty disputes are lost before the boiler breaks. If the boiler was never registered, the commissioning record is missing or services were skipped, the manufacturer may refuse cover and the customer will look to you.
- Register the boiler with the manufacturer at installation, and send the customer confirmation.
- Complete the commissioning record in full. The paper Benchmark checklist and service record is no longer maintained; the record has moved online and to the Benchmark apps[3].
- Explain the warranty conditions to the customer in plain English, especially annual servicing.
- Record services in the digital Benchmark record and your own job history.
- Fit a filter and inhibitor where the manufacturer requires them, and record it.
- Keep photos of the installation, including flue and condensate routes, in the job record.
Most warranty calls involve combis
The boiler stock has changed completely in a generation. In England, 63% of homes had a condensing combination boiler and 19% a condensing boiler in 2024, up from 2% and 1% in 2001[4]. Condensing boilers have been mandatory for new and replacement boilers in England since the mid-2000s[5]. In practice, that means most warranty calls you receive will be about condensing combis, and the classic early faults are linked to condensate drainage, pressure and controls as often as to the appliance itself.
- 2001
- 2024
Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2024[4]
Show the data
| Item | 2001 | 2024 |
|---|---|---|
| Condensing combination boiler | 2% | 63% |
| Condensing boiler (non-combi) | 1% | 19% |
Train office staff on the handful of combi issues that can be resolved by phone, and make sure engineers record condensate routes and pressure settings at commissioning. Both cut unnecessary warranty visits.
Explaining warranty conditions at handover
Most warranty arguments start with a customer who did not know the conditions. Handover is the moment to fix that, while the customer is paying attention to the new boiler. Keep it short and give it in writing as well.
Script: 'Your boiler comes with a manufacturer's warranty. To keep it valid, it needs a service every year by a Gas Safe registered engineer, and we've registered it for you today. Separately, if anything goes wrong with our installation work, that's on us, whatever the warranty says. If the boiler ever shows a fault, call us first and we'll work out who needs to come out.'
Then put the same points in the handover pack or report: the warranty length and conditions as stated by the manufacturer, the registration confirmation, the service due date, and your own number for any problem. If you offer service reminders, ask at handover whether the customer would like them, and record the answer.
When the manufacturer says it is an installation fault
Sometimes a manufacturer's engineer attends and reports that the fault was caused by the installation, such as debris in the system, an incorrectly sized gas supply or a flue issue. The customer may then be told the visit is chargeable. Handle this calmly and quickly. Ask for the manufacturer's engineer's report, check it against your own photos and commissioning record, and visit if needed. If the finding is right, put it right at your cost and deal with any charge so the customer is not left out of pocket. If you disagree, explain why to the manufacturer with your evidence, not to the customer in frustration. Either way, keep the customer informed at each step.
What to record on every warranty call
- Date and time of the call, the caller and their relationship to the property.
- Boiler make, model, serial number and installation date.
- Fault code and symptoms in the customer's words.
- Registration status and service history.
- Who was asked to attend: your engineer or the manufacturer, and the claim reference.
- What was found, and whether it was an appliance or installation fault.
- What was done, by whom, and any charge agreed with the customer.
- The follow-up date and outcome.
Customers take guarantee problems seriously. In the consumer protection study, guarantees not being honoured made up only 4% of consumer problems, but people took action in 93% of those cases, the highest rate of any problem type[6]. A careful record is what lets you show you did what you promised.
Example: one boiler, two faults
Example: eighteen months after an install, a fictional customer reports her combi locking out every cold morning. The office checks: registered, serviced, Benchmark record complete. The fault code points to condensate. The engineer finds the external condensate pipe has frozen, and on inspection it was run with too little fall and without the insulation the job sheet says was fitted. That is an installation fault, so the firm re-routes and insulates it at no charge, within the week.
Two months later the same boiler shows a fan fault. This time the installation is sound and the fault is inside the appliance. The office logs a claim with the manufacturer, gives the customer the reference and checks after the manufacturer's engineer has attended. In this example the customer sees one firm that owned its mistake and helped with the one that was not its fault.
Frequently asked questions
Is a boiler warranty the installer's responsibility?
The manufacturer's warranty covers the appliance under its terms. The installer is responsible for the installation work under the contract and consumer law, including putting faulty work right at their own cost.
Can a manufacturer refuse a warranty claim?
If the warranty conditions are not met, for example the boiler was not registered or serviced as required, the manufacturer may refuse. Check each manufacturer's terms and keep records.
Should I charge for a warranty call-out?
Not for installation faults, which you must put right at your cost. For appliance faults outside your responsibility, agree any charge with the customer before attending.
References
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 49 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 55 (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2026). Benchmark goes digital - what homeowners need to know (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 2, energy efficiency (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 2, energy efficiency (condensing boilers) (opens in a new tab) ↑
Department for Business, Energy and Industrial Strategy (GOV.UK) (2022). Consumer protection study 2022 (Figures 5 and 20) (opens in a new tab) ↑