Key takeaways
- Recruitment and skills are a major obstacle for 45% of construction SME employers[1], so book winter cover in late summer, not in December.
- Choose the route first: agency worker, CIS subcontractor or fixed-term employee each bring different tax, rights and control.
- Most subcontracted heating work falls under CIS[2]; deductions are 20% for registered subcontractors and 30% if they are not registered or cannot be verified[3].
- Agency workers get equal pay and holiday rights after 12 weeks in the same job[4].
- Check Gas Safe registration and the right categories for every engineer who will touch gas, before day one.
Why winter cover needs planning in August
Every heating firm wants an extra pair of hands in the same three months, and so does every other firm in your area. In 2025, 45% of construction SME employers named staff recruitment and skills as an obstacle to business success[1]. Good temporary engineers are booked early, and the ones still available in December are available for a reason.
Start in August with three questions: how many extra engineer-days you need from October to February, what kind of work they will do, and how much control you need over how they do it. The answers decide which route makes sense.
Three routes compared
| Question | Agency worker | CIS subcontractor | Fixed-term employee |
|---|---|---|---|
| Who pays them | The agency | You, with CIS deductions | You, through payroll |
| Tax and National Insurance | Handled by the agency | You deduct under CIS and pass to HMRC | PAYE, employer National Insurance |
| Holiday and pension | Paid holiday and pension after 12 weeks; worker rights from day one | Their own responsibility | Full statutory holiday and auto-enrolment |
| Your control over how they work | Day-to-day direction, within the agency terms | Agree the result; they decide how | Full, as with permanent staff |
| Best for | Short notice, uncertain length | Experienced engineers with their own van and tools | A full winter, possibly leading to a permanent job |
The labels on paper are not what decides someone's status. If a subcontractor works only for you, uses your van, follows your diary and cannot send a substitute, HMRC and the courts may treat them as an employee or worker whatever the contract says. Decide the route honestly and run the arrangement to match.
Agency engineers: what the law gives them
An agency worker has a contract with the agency and works temporarily for you. From day one they have a worker's employment rights and the same access as your own staff to shared facilities such as canteens and transport. After 12 weeks in the same job they qualify for equal treatment: the same pay as a permanent colleague doing the same job, automatic enrolment in a workplace pension and paid annual leave[4].
That makes agencies good for short or uncertain cover, and less attractive if you plan to keep someone for a whole winter. Ask the agency how it checks Gas Safe registration and categories, what insurance covers the engineer's work, and what happens if they do not turn up.
Subcontractors and the Construction Industry Scheme
The Construction Industry Scheme covers installing heating, power, water and ventilation systems, so most plumbing and heating subcontract work falls under it[2]. As the contractor, you verify each subcontractor with HMRC before paying them and deduct tax from their labour payments: 20% if they are registered and can be verified, 30% if they are not registered or cannot be verified[3].
Source: GOV.UK, 2026[3]
Show the data
| Item | Value |
|---|---|
| Registered and verified | 20% |
| Not registered or not verified | 30% |
- Verify the subcontractor with HMRC before the first payment, and keep the verification reference.
- Get a written agreement that sets out the work, rates, insurance and who supplies materials.
- Ask for invoices that separate labour from materials, because deductions apply to labour.
- File your monthly CIS return on time and give subcontractors their deduction statements.
- Check their public liability insurance and that it covers gas work.
Fixed-term employees
Taking someone on as an employee for the winter gives you the most control and the clearest status. It also brings the full set of employer costs. From April 2026, the National Living Wage for workers aged 21 and over is £12.71 an hour[5]. Employers pay 15% National Insurance on earnings above the secondary threshold[6], must enrol eligible staff in a workplace pension with an employer contribution of at least 3%[7], and almost all workers are entitled to 5.6 weeks' paid holiday a year, which builds up during a fixed term[8].
Fixed-term staff should not be treated less favourably than comparable permanent staff, so offer the same overtime rates, van rules and training. Many firms use a winter contract as a trial for a permanent role, which helps with recruitment the following year.
Vetting checklist before day one
By law, no one may work on gas fittings unless they are a member of a class approved by the Health and Safety Executive, which in practice means being on the Gas Safe Register[9]. Check this yourself, whatever route the engineer comes through.
- Gas Safe registration checked online, with the categories that match the work: domestic natural gas, boilers, cookers, LPG or others you need.
- Photo ID that matches the Gas Safe card.
- Right to work in the UK checked before they start, for anyone you employ[10].
- Other competences you rely on: unvented hot water, oil, heat pumps, water regulations.
- Insurance: public liability, and professional indemnity if they design or specify.
- Two references from heating firms, ideally including one you can phone.
- Driving licence check if they will drive your van.
- Any client requirements, such as enhanced checks for work in schools or for social landlords.
A one-day induction
Morning: your way of working
Job sheets, the app or paperwork you use, how notes and photos are recorded, how parts are ordered and collected.
Safety and escalation
Your unsafe-situation procedure, who to call when unsure, and the rule that anything involving gas or carbon monoxide is escalated, never guessed.
Customers
How you introduce yourselves, what engineers can and cannot promise on price and timing, and how complaints are passed on.
Afternoon: shadow a permanent engineer
Two or three jobs side by side, so they see your standards in practice.
First week check-in
Review their first five job notes and ask the customers for quick feedback.
Where to find winter engineers
The best temporary engineers usually come through people you already know rather than job boards. Start with the engineers who have left you on good terms, retired engineers who still hold their registration and want a few days a week, and sole traders in your area whose own winter is quieter than yours, such as bathroom fitters who also hold gas qualifications. Training providers and colleges can introduce recently qualified engineers looking for experience, though they will need closer supervision.
- Ask your merchant counter staff who is looking for work; they know every engineer in the area.
- Contact manufacturers' installer networks for engineers who already know the boilers you fit.
- Post in local trade groups in August, with clear dates, work types and how you pay.
- Keep a short list of people who covered well last winter and offer them first refusal next year.
Whichever source you use, interview by phone and then by a paid trial day on real jobs. Watch how they talk to customers, how they write up, and whether they ask before guessing. Technical skill is easier to check than judgement, and judgement matters more when they are working alone in someone's home.
Supervision without slowing everyone down
A temporary engineer is most likely to cause a complaint in their first two weeks. Pair them with a permanent engineer for a phone check-in at lunchtime and the end of each day for that period. Review their first five job notes and photos. Ask the office to phone a handful of their customers for quick feedback. After two weeks, scale back to a weekly catch-up if all is well.
Example: covering a winter with two routes
Example (fictional): a four-engineer firm in Reading forecasts that it needs about 60 extra engineer-days between November and February. In August it agrees a fixed-term winter contract with a recently qualified engineer it met through a training provider, covering November to February, and lines up an experienced CIS-registered subcontractor for landlord gas safety checks two days a week. The subcontractor is verified with HMRC before the first payment and invoices labour and materials separately. Both are checked on the Gas Safe Register, inducted in October and shadow a permanent engineer for a day. An agency is kept as a fallback for illness. By March, the fixed-term engineer is offered a permanent role.
Common mistakes
- Leaving it until the first cold snap, when the best people are booked.
- Assuming a subcontractor's status is settled because they have their own van.
- Checking the Gas Safe card is valid but not the categories on it.
- Skipping induction because the engineer is experienced, then dealing with notes nobody can read.
- Forgetting that agency workers gain equal treatment after 12 weeks[4] when planning a long assignment.
For the rota side of winter cover, see using weather alerts to plan rotas. For phones, read overflow call handling for winter surges, and for the wider staffing choice, answering service or office staff.
Frequently asked questions
Do temporary engineers need their own Gas Safe registration?
Yes. Anyone working on gas fittings must belong to a class approved by the Health and Safety Executive, in practice the Gas Safe Register[9]. Check the categories match the work.
Is a winter subcontractor covered by CIS?
Usually. CIS covers installing heating, power, water and ventilation systems[2]. Verify them with HMRC before paying and deduct at the right rate.
When do agency engineers get the same pay as our staff?
After 12 weeks in the same job they are entitled to equal treatment, including the same pay as a comparable permanent colleague[4].
Do we need right to work checks for subcontractors?
The employer duty is to check job applicants before employing them[10]. For genuinely self-employed subcontractors the duty is different, but many firms still check ID and keep records.
References
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑
GOV.UK (2026). What is the Construction Industry Scheme (opens in a new tab) ↑
GOV.UK (2026). What you must do as a CIS subcontractor: get paid (opens in a new tab) ↑
GOV.UK (2026). Agency workers: your rights as a temporary agency worker (opens in a new tab) ↑
GOV.UK (2026). National Minimum Wage and National Living Wage rates (opens in a new tab) ↑
GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑
GOV.UK (2026). Workplace pensions: what you, your employer and the government pay (opens in a new tab) ↑
GOV.UK (2026). Holiday entitlement (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑
GOV.UK (2026). Check a job applicant's right to work (opens in a new tab) ↑