Key takeaways
- Where vulnerable people bathe, HSE says water temperatures must not exceed 44°C, and care home baths and showers should have thermostatic mixing valves where scalding is a risk[1].
- Hot pipes and radiators that vulnerable people could touch should not exceed 43°C at maximum design output[1].
- Storage at 60°C and distribution at 50°C still apply for legionella, so mixing valves have to do the balancing[2].
- Self-employed engineers cannot be DBS checked by the client; they must request their own[3].
- Plan every visit around the occupants: timing, sign-in, supervision, infection control and dignity.
Why these buildings are different
Schools, care homes, nurseries and supported living settings look like ordinary commercial buildings from the plant room, but the people using them change everything. Residents may have limited mobility, reduced sensation or confusion. Pupils may be very young or have special educational needs. Hot water and hot surfaces that an office worker would never notice can cause serious harm, and the presence of contractors needs managing for safeguarding reasons.
For a plumbing and heating firm, that means three extra layers on top of normal good practice: scald and burn control, a balanced approach to legionella, and site rules covering who can be where and when. Clients in these sectors notice firms that understand all three without being told.
Scald limits and mixing valves
HSE guidance for health and social care says that where vulnerable people are at risk from scalding during whole-body immersion, water temperatures must not exceed 44°C[1]. In care homes with en-suite bedrooms, where storage and distribution temperatures are raised to control legionella or high temperatures could otherwise occur, baths and showers should be fitted with thermostatic mixing valves so water does not exceed 44°C[1]. For electric showers in NHS premises, the guidance gives a maximum of 41°C[1].
Source: Health and Safety Executive, 2026[1]
Show the data
| Item | Value |
|---|---|
| Bath water, maximum | 44 degrees C |
| Hot surfaces, maximum | 43 degrees C |
| NHS electric showers, maximum | 41 degrees C |
For washbasins the guidance does not set a number, but says that where a person is assessed as vulnerable to scalding, adequate controls on output temperature, such as mixing valves, should be in place[1]. Where most residents are vulnerable, fitting them to every resident outlet is the simplest way to meet that. Ask for the client's specification: healthcare buyers commonly specify valves approved under the TMV3 scheme, while other settings may accept TMV2.
A mixing valve is a safety device, not a fitting. Record its location, set temperature and every test, and treat a failed fail-safe test as an urgent repair.
Balancing legionella and scald risk
The same buildings need hot water hot enough to control legionella. HSE guidance for care premises says calorifiers should store water at 60°C or higher and distribute it at 50°C or higher[2], and notes that residents or patients are likely to include people at higher risk of the disease[2]. The mixing valve sits at the meeting point: hot enough upstream to control bacteria, safe enough downstream for a frail resident.
- Fit valves as close as practical to the outlet to keep the length of mixed water pipework short.
- Flush infrequently used outlets, including showerheads and taps, at least weekly[2]; empty rooms are a common gap in care homes.
- Include mixed water outlets in the monthly temperature checks and record both hot supply and mixed outlet readings.
- Plan valve servicing and descaling so that it does not leave outlets with blended water sitting warm for long periods.
For the full monitoring regime, see legionella control in commercial buildings.
Hot surfaces: radiators and pipework
Burns from hot surfaces are as serious as scalds for someone who cannot move away. HSE guidance says that where vulnerable people could be burned, the surface should not exceed 43°C when the system is running at maximum design output[1]. Standard radiators running on a conventional gas boiler system get far hotter than that.
Options include low surface temperature radiators, radiator guards with adequate ventilation, boxed-in pipework and lagged exposed pipes in corridors and bathrooms. When you replace heating in a care home or a special school, ask early whether the client's risk assessment calls for these. Retro-fitting guards after the job costs more and looks worse.
Mixing valve maintenance schedule
| Task | Example frequency | Record |
|---|---|---|
| Mixed outlet temperature check | Monthly with legionella checks | Outlet ID, mixed temperature, hot supply temperature |
| Fail-safe test (isolate cold supply) | As manufacturer and risk assessment require | Pass or fail, action taken |
| Clean strainers and check seals | Per manufacturer, often yearly | Condition and parts replaced |
| Full service or replacement | Per manufacturer and condition | Valve model, set temperature, date |
Follow the valve manufacturer's instructions and the site's risk assessment over any generic schedule. Hard water areas need more frequent strainer cleaning and descaling, and failed valves often show up first as complaints that water is lukewarm.
DBS checks and safeguarding
There are four levels of DBS check: basic, standard, enhanced, and enhanced with barred lists[3]. Which applies depends on the role and the setting, and many schools and care operators set their own rules for contractors, such as an enhanced check for anyone working unsupervised during the day. If a client hires a self-employed person, it cannot request a DBS check for them; the self-employed person must request their own and the client should check the certificate[3].
Our guide to DBS checks for engineers explains the levels and how to apply. A clear written safeguarding policy, ID badges and a rule that engineers are never alone with children or residents will answer most of a client's questions.
Access rules on site
- Schools: plan noisy or disruptive work for holidays, half-terms or after school. Sign in at reception every time, wear ID and follow the school's escort rules. Toilets and changing areas are usually worked on only when pupils are absent.
- Care homes: book through the home manager, respect residents' privacy in their rooms, knock and wait, and agree in advance how a resident will be moved or supported if work is needed in their en-suite.
- Infection control: follow the home's rules on hand hygiene, protective equipment and areas closed during outbreaks.
- Fire safety: never wedge fire doors open and tell the site if you will be hot working.
- Keys and codes: return keys and fobs before leaving, and do not share door codes.
Gas appliances and carbon monoxide
Many schools and care homes run gas boilers and catering appliances. The NHS lists gas boilers, gas cookers and gas heaters among household appliances that can produce carbon monoxide when badly installed, faulty or poorly maintained[4]. In buildings where occupants may not recognise symptoms, plant room ventilation, flue integrity and carbon monoxide detection deserve particular care at every service.
Every service contract to these clients carries the ordinary duty that the work is performed with reasonable care and skill[5]. In settings with vulnerable occupants, that standard includes noticing and reporting things outside your immediate job: a missing radiator guard, a loose valve cover, a cold room that a resident cannot leave.
A first-visit checklist for these sites
Before the first job at a new school or care home, agree the basics with the site lead so that engineers arrive knowing the rules rather than learning them at reception.
- Who is the site contact, and who can approve extra work or isolate a system?
- Which DBS level and identity documents does the site require, and where should certificates be shown?
- Which hours and areas are off limits, such as pupil toilets during the school day or residents' rooms during meals?
- Where are the plant rooms, isolation valves, stopcocks and gas meters, and who holds the keys?
- Is there a current legionella risk assessment and logbook, and who records monitoring?
- What is the policy on mixing valves, radiator guards and hot surfaces?
- What infection control rules apply, and are any areas closed today?
- How should urgent safety findings be reported, and to whom, out of hours?
Write the answers into the site record so that any engineer covering the site, including an on-call engineer at night, has them to hand. Clients in these sectors value consistency: the same faces, the same routine and the same paperwork every time.
Example: a mixing valve failure in a care home
Example: a care home reports that a resident's en-suite shower is running much hotter than usual. The heating firm's engineer attends that afternoon, signs in, confirms with the home manager that the resident has moved to a lounge, and finds the mixed outlet at well above 44°C with the valve failing its fail-safe test. The engineer isolates the shower, labels it out of use, tells the manager in person and replaces the valve the next morning with a matching approved model. The record shows the readings before and after, the test results and the new valve's set temperature.
Frequently asked questions
What temperature should a care home bath be?
HSE guidance says that where vulnerable people are at risk of scalding during whole-body immersion, water must not exceed 44°C. Thermostatic mixing valves are the usual control.
Do schools need thermostatic mixing valves?
It depends on the risk assessment. Special schools and nurseries often fit them where pupils could be scalded. Ask for the school's specification before quoting.
Can I work in a care home without a DBS check?
Some homes allow supervised contractors without one, but many require a check for anyone working in residents' areas. Check the client's policy in advance and keep certificates ready to show.
How do I stop radiators burning residents?
Use low surface temperature radiators or properly ventilated guards so surfaces stay at or below 43°C at maximum output, as HSE guidance sets out for vulnerable people.
References
Health and Safety Executive (2026). Scalding and burning in health and social care (opens in a new tab) ↑
Health and Safety Executive (2026). Legionella and health and social care premises (opens in a new tab) ↑
GOV.UK (2026). DBS checks: types of check and who can apply (opens in a new tab) ↑
NHS (2026). Carbon monoxide poisoning (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 49 (opens in a new tab) ↑