Staffing training

Hiring engineers from overseas: Skilled Worker visa routes

Sponsoring an overseas plumber or heating engineer: occupation code 5315, the shortage list, salary rates, sponsor licence steps and Gas Safe checks.

Ava research teamPublished 7 min read

On this page
  1. Why heating firms are looking abroad
  2. Where plumbers sit in the immigration rules
  3. The salary test
  4. Getting a sponsor licence: the steps
  5. Qualifications and Gas Safe registration
  6. Example: a six-engineer heating firm
  7. Before you commit: a short checklist
  8. Other ways to grow the team
  9. Frequently asked questions
  10. References

Key takeaways

  • Plumbers and heating engineers sit under occupation code 5315, which the rules class as skilled to RQF level 3 to 5, below the usual Skilled Worker level[1].
  • New overseas hires in this code depend on the Temporary Shortage List, which sets a standard rate of £38,100 and a lower rate of £31,400[2].
  • You need a sponsor licence and must assign a certificate of sponsorship before the engineer applies[3].
  • A visa does not give anyone the right to work on gas: they still need to join the Gas Safe Register route before touching a gas fitting[4].
  • Check the current Immigration Rules on the day you assign the certificate, because the shortage list is temporary by design.

Why heating firms are looking abroad

Recruitment is the problem that keeps coming up in small construction firms. In the 2025 small business survey, 45% of construction SME employers named staff recruitment and skills as an obstacle to success[5]. Plumbing makes it harder than most trades because so many qualified people work for themselves: about 71,200 of the UK's plumbers and heating installers, close to half, were self-employed in the year to June 2026[6]. The pool of engineers who want a payslip is smaller than the headline workforce suggests.

Demand is also moving. The Warm Homes Plan says the clean heat and energy efficiency transition could support up to 180,000 additional jobs by 2030[7]. Firms that win heat pump and retrofit work need more hands, and some owners now ask whether an experienced engineer from overseas could fill the gap. It can work, but the rules for this trade are narrower than for graduate roles, and they changed in July 2025.

Where plumbers sit in the immigration rules

RQF 3–5

Skill level the rules give occupation code 5315, plumbers and heating and ventilating installers[1]

The Skilled Worker route is built around occupation codes. Plumbers and heating and ventilating installers and repairers are code 5315, and the Appendix Skilled Occupations lists that code as skilled to RQF level 3 to 5[1]. Since 22 July 2025, codes at that level can only be sponsored in limited cases. The appendix says sponsors may only sponsor these codes if the applicant was granted permission as a Skilled Worker under the rules in place before 22 July 2025 and has held continuous permission since, unless the Temporary Shortage List applies[1].

In practice that leaves two doors. The first is an engineer who is already in the UK on a Skilled Worker visa granted before that date and wants to change employer. The second is the Temporary Shortage List, which includes code 5315[2]. A brand-new hire from overseas goes through the second door, so your plan depends on that list still covering the role when you assign the certificate.

Which route fits the candidate in front of you
Candidate's situationCan you sponsor?What to check
Already a Skilled Worker, first permission granted before 22 July 2025Usually yes, under the transitional ruleContinuous permission since then and the going rate for the code[1]
Living overseas, no current UK permissionOnly through the Temporary Shortage ListCode 5315 is still listed and the salary meets the list rate[2]
Already holds unrestricted permission to workNo sponsorship neededA standard right to work check before day one
Self-employed engineer abroad wanting to stay self-employedNoSkilled Worker needs a job offer from an approved employer[3]

The salary test

Salary is where many plumbing roles fall over. The general Skilled Worker threshold is whichever is higher of £41,700 a year or the going rate for the work[3]. Roles on the Temporary Shortage List use the list's own figures: for code 5315 the published rates are £38,100 a year (£19.54 an hour) as the standard rate and £31,400 (£16.10 an hour) as the lower rate[2]. The lower rate only applies where the applicant meets one of the specific conditions in the rules, so do not budget for it until you have checked that the person qualifies.

Temporary Shortage List salary rates for plumbers (SOC 5315)Annual salary the role must meet. Check the current list before you recruit.
Temporary Shortage List salary rates for plumbers (SOC 5315)Comparison. Standard rate: £38,100; Lower rate: £31,400.£38,100Standard rateStandard rate: £38,100£31,400Lower rateLower rate: £31,400Temporary Shortage List salary rates for plumbers (SOC 5315)Comparison. Standard rate: £38,100; Lower rate: £31,400.£38,100Standard rateStandard rate: £38,100£31,400Lower rateLower rate: £31,400

Source: GOV.UK (Home Office), 2025[2]

Show the data
ItemValue
Standard rate£38,100
Lower rate£31,400

Compare those figures with the local market. The median full-time employee plumber earned £39,179 in 2026, provisional figures show[8]. The standard shortage-list rate is close to the median, which means a sponsored engineer is not cheap labour. If your pay structure sits well below the median, sponsorship will force a conversation about pay for the whole team, not just the new hire. Check which pay elements count towards the threshold before you make an offer; a basic salary that clears the rate on its own is the safest plan.

Getting a sponsor licence: the steps

  1. Confirm the role and the code

    Write a real job description: domestic gas servicing, boiler installs, unvented cylinders, heat pump work. Match it to code 5315 and check the duties fit. A role padded to look more senior is a compliance risk.

  2. Check the current lists

    Open the Immigration Rules on the day you plan to recruit and confirm that 5315 is still on the Temporary Shortage List and what the rates are[2].

  3. Apply for a sponsor licence

    The application asks for evidence that the business is genuine and trading, and for named people who will run the licence. Build in time for the Home Office to decide, and check the current fees on GOV.UK.

  4. Set up your HR records

    Sponsors must keep records and report certain changes. If you do not already hold contracts, right to work checks and absence records in one place, fix that before the licence arrives.

  5. Assign the certificate of sponsorship

    The certificate is an electronic record, not a paper document, and the engineer must apply within 3 months of receiving it[3].

  6. Check right to work before day one

    Once the visa is granted, do the right to work check before the engineer starts and keep a dated record.

Qualifications and Gas Safe registration

Immigration permission and permission to work on gas are separate things. By law, no employer or self-employed person may carry out work on a gas fitting unless they belong to a class of persons approved by the HSE, which in practice means the Gas Safe Register[4]. An engineer with years of experience in another country still needs UK gas assessments before you can send them to a boiler service. Plan for that in the first months, and see our guide to ACS assessments and managed learning.

  • Ask for qualification certificates and a written work history before you assign a certificate.
  • Book a practical skills check or a paid trial day if the engineer is already in the UK.
  • Agree which work they can do from day one (water, drainage, non-gas heating) and which waits for assessments.
  • Pair them with a senior engineer for UK regulations: Building Regulations notification, water fittings rules and unvented cylinder work.
  • Put the training plan in writing so both sides know what happens if an assessment is failed.

Example: a six-engineer heating firm

Example (fictional): a firm in Leeds has two vacancies open for five months and has turned down boiler installs. The owner finds an experienced engineer abroad. Before spending anything, the office manager checks three things. Is 5315 still on the shortage list? Yes. Can the firm pay at least the standard rate? The current senior engineers earn £39,000, so a £38,500 basic salary fits the structure. Can the new engineer work productively before gas assessments? Yes, on cylinder, radiator and drainage jobs for the first eight weeks.

The owner then prices the full cost: licence and visa fees from GOV.UK, a relocation allowance, eight weeks of supervised work, and assessment fees. The total is compared with the margin on the boiler installs the firm currently turns away. The answer in this example is yes, but only because the work is already there. Firms sponsoring speculatively, hoping work will follow, carry the cost with no return.

Before you commit: a short checklist

  1. Is the work there today? Count the jobs turned away in the last quarter.
  2. Have you tried the home market properly: career changers, apprentices, and the very small pool of women in the trade, about 2,700 people in the year to June 2026[9]?
  3. Can you pay at or above the shortage-list rate without upsetting your current pay structure?
  4. Who will run the sponsor licence and keep its records up to date?
  5. Is there a senior engineer with time to supervise for the first months?
  6. Have you read the current rules, not a blog post from last year?

This guide is general information, not immigration advice. Sponsor licence decisions turn on detail, so use a regulated immigration adviser or solicitor for anything you are unsure about.

Other ways to grow the team

Sponsorship is one tool among several. Firms that struggle to hire often lose engineers too, so look at retention, pay and van policy before adding cost. Apprentices take longer but stay longer, and the apprentice minimum wage is £8 an hour from April 2026 for under-19s and first-year apprentices[10]. Ex-forces engineers and career changers bring discipline and customer skills that are hard to train. Whatever route you take, the first two weeks decide whether the hire sticks, so read our guide to onboarding a new engineer before the start date.

Frequently asked questions

Can I sponsor a plumber on a Skilled Worker visa?

Only in limited cases. Code 5315 is below the usual skill level, so a new overseas hire depends on the Temporary Shortage List, and an engineer already sponsored before 22 July 2025 can usually move under the transitional rule.

Does the visa let the engineer work on gas?

No. Working on a gas fitting requires membership of the class of persons approved by the HSE, which means Gas Safe registration after the right assessments.

Can a sponsored engineer be self-employed or a subcontractor?

No. The Skilled Worker route needs a job offer from an approved employer, so the engineer must be on your payroll in the sponsored role.

How long does the engineer have to apply?

They must apply within 3 months of receiving the certificate of sponsorship.

References

  1. GOV.UK (Home Office) (2026). Immigration Rules Appendix Skilled Occupations (opens in a new tab) ↑

  2. GOV.UK (Home Office) (2025). Skilled Worker visa: temporary shortage list (opens in a new tab) ↑

  3. GOV.UK (Home Office) (2026). Skilled Worker visa: your job (opens in a new tab) ↑

  4. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑

  5. Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

  6. Office for National Statistics (Nomis) (2026). Annual Population Survey - regional - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑

  7. Department for Energy Security and Net Zero (GOV.UK) (2026). Warm Homes Plan (opens in a new tab) ↑

  8. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  9. Office for National Statistics (Nomis) (2026). Annual Population Survey - regional - occupation (SOC2020) by sex by employment type, via Nomis (opens in a new tab) ↑

  10. GOV.UK (2026). National Minimum Wage and National Living Wage rates (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo