Key takeaways
- Supplying materials costs you time, money and risk; a markup pays for that, not just profit.
- Markup is calculated on cost and margin on the selling price: a 25% markup gives a 20% margin.
- Tiered markups (higher on small items, lower on big-ticket items like boilers) are common and easy to defend.
- Prices move fast: rigid pipes and fittings rose 16.9% in the year to September 2026[1], so price from this week's cost.
- Never describe marked-up materials as 'at cost'; what you tell the customer about the price can become a term of the contract[2].
Why materials carry a markup
Customers sometimes see a markup on parts as profit for doing nothing. It is not. Supplying the right part, on the right day, with a guarantee behind it, costs a plumbing firm real money. The markup pays for that work, and only what is left after it is profit. List the costs before you decide the percentage:
- Time spent specifying, ordering and collecting parts, often unbilled.
- Van stock: money tied up in fittings, valves and common spares, and the shrinkage that comes with it.
- Returns and wrong parts, including restocking fees and second trips to the merchant.
- Handling warranty claims on parts you supplied, which can take hours on the phone.
- Credit terms: you pay the merchant whether or not the customer pays you on time.
- Price risk between quoting and buying, when list prices go up.
Markup and margin are not the same number
Markup is the amount you add, expressed as a percentage of what the part cost you. Margin is the same amount expressed as a percentage of what you sell it for. For example, if a valve costs you £40 and you sell it for £50, the markup is £10 on £40, or 25%, and the margin is £10 on £50, or 20%. Mixing the two up is one of the commonest pricing mistakes in small firms: an owner who wants a 25% margin and adds 25% to cost ends up with 20%.
| Markup on cost | Resulting margin on price |
|---|---|
| 10% | 9.1% |
| 15% | 13.0% |
| 20% | 16.7% |
| 25% | 20.0% |
| 33.3% | 25.0% |
| 50% | 33.3% |
| 100% | 50.0% |
The conversions are simple. Margin equals markup divided by one plus the markup. To hit a target margin, divide the cost by one minus the margin. For example, for a 20% margin on a £40 part, divide £40 by 0.8 to get £50. Decide which one your firm uses, put it in writing, and make sure everyone who quotes uses the same method.
Common approaches to pricing materials
- A flat percentage on everything. Simple, but heavy on big-ticket items and light on the small fittings where handling costs are proportionally highest.
- Tiered markups. A higher percentage on low-value items and consumables, a lower one on boilers, cylinders and radiators. Most common among established firms.
- Merchant list price. You charge the merchant's published list price and keep your trade discount as the margin. Easy to defend, because customers can look the price up.
- All-inclusive fixed prices. On fixed-price jobs, materials are part of one total and not shown separately, so the question of markup does not arise for the customer.
- A separate handling or supply charge. Rare in domestic work, but sometimes used for commercial clients who want parts shown at net cost.
Whichever you use, apply it consistently. Customers compare invoices with neighbours and with online prices; inconsistency causes more complaints than the size of the markup itself.
Material prices keep moving
Pricing from an old list is a hidden discount. The government's construction material statistics show the price index for all construction work rising 7.2% in the year to September 2026, with rigid pipes and fittings among the fastest risers at 16.9%[1]. Producer prices for plumbing and heating products moved at very different speeds over the same twelve months[3].
Two practical rules follow. First, price every quote from this week's cost, using your merchant's online account or a quick call, rather than last quarter's price list. Second, put a validity period on quotes that include significant materials, so a quote accepted months later is repriced. Protecting quotes against material price rises covers validity windows and fluctuation clauses.
Presenting materials honestly
You do not have to show your markup, but you must not mislead. Anything you say or write about the price that the customer takes into account when deciding to go ahead is treated as a term of the contract[2]. If you tell a customer 'parts at cost' and then add a markup, you have broken that term. Use plain descriptions instead: 'parts as listed', 'materials supplied and fitted', or a single fixed price.
On hourly jobs, list materials as separate lines with the price you charge. On fixed-price jobs, a single total with a clear scope is usually better. If no price is agreed at all, the customer only has to pay a reasonable price[4], which invites argument about what a reasonable price for a part is.
When the customer asks what you paid
- 'The price includes ordering, collecting and guaranteeing the part. If it fails, we deal with the manufacturer and come back to fit the replacement.'
- 'Our parts prices are based on the merchant's list price, so you can check them if you like. Our trade discount covers the cost of supplying them.'
- 'On a fixed-price job like this, the price covers everything in the scope, so we don't break out the parts. If you'd like a materials list, we can give you one.'
Most customers who ask are checking that you are not taking advantage. A calm, specific answer settles it; a defensive one makes them suspicious.
Van stock and consumables
Small consumables such as PTFE tape, solder, flux, jointing compound, inhibitor, sealant and clips are used on almost every job but rarely itemised. Leaving them off invoices entirely is a slow leak of margin. Either add a small consumables line to hourly jobs, priced as a fixed amount per visit, or build an allowance into your hourly rate and fixed prices. Pick one approach and use it everywhere.
Van stock deserves its own check. Count the stock on each van twice a year, compare it with what has been invoiced, and look at the gap. Some loss is normal; a large gap usually means parts are being fitted and not charged, often on small jobs where the engineer forgets to note them. A simple rule that every part fitted goes on the job sheet before leaving site recovers more margin than a higher markup would.
When customers want to buy the parts themselves
Some customers try to avoid the markup by buying their own boiler, taps or valves. That shifts the handling, but also raises questions about suitability, warranty and liability. You still owe the customer reasonable care and skill in fitting whatever is supplied[5]. Set a clear policy before the request comes in; customer-supplied parts: a fair policy sets out the options.
Setting your materials policy
Total your handling costs
Estimate a year of ordering and collection time, van stock losses, returns, warranty handling and credit costs.
Compare with materials turnover
Divide handling costs by the value of materials you supply in a year. That percentage is the minimum average markup before any profit.
Choose the structure
Flat, tiered or list price. If tiered, set two or three bands by item value.
Write it down
Record whether you work on markup or margin, the bands and the rule for consumables, and add it to your quoting template.
Review quarterly
Check actual margins on materials from your accounts and adjust the bands if prices or handling costs have moved.
Example: a tiered markup in practice
Example: a fictional firm in Reading sets three bands. Items costing under £50, such as valves, fittings and cartridges, carry a 40% markup, because handling costs are high relative to value. Items from £50 to £500, such as radiators and pumps, carry 20%. Boilers and cylinders over £500 carry 10%, because the firm wants to stay competitive on installs where customers compare quotes closely. Over a year, the blended markup works out at about 18% on all materials, and complaints about parts prices almost disappear because the most visible, big-ticket items carry the lowest markup.
Frequently asked questions
What is a normal markup on plumbing materials?
There is no standard figure. Many firms use tiered markups, higher on small items and consumables and lower on boilers and cylinders. Work out your own minimum from your handling costs, then add profit.
What is the difference between markup and margin?
Markup is the amount added as a percentage of cost; margin is the same amount as a percentage of the selling price. A 25% markup gives a 20% margin.
Do I have to tell customers how much I paid for parts?
No, but you must not mislead them. If you say parts are 'at cost', that statement can become a term of the contract[2]. Use neutral wording or a single fixed price instead.
References
Department for Business and Trade (GOV.UK) (2026). Building materials and components statistics: October 2026 (commentary) (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 50 (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2026). Building materials and components statistics: October 2026, Table 2 (monthly producer price indices of construction materials) (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 51 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 49 (opens in a new tab) ↑