Quotes pricing

Customer-supplied parts: a fair policy

A fair policy for fitting customer-supplied boilers, taps and parts: suitability checks, warranty, liability under UK law, pricing and the wording to use.

Ava research teamPublished 7 min read

On this page
  1. Why customers supply their own parts
  2. Three policy options
  3. Check suitability before you agree
  4. Warranty and liability: who is responsible for what
  5. Pricing customer-supplied jobs fairly
  6. On the day of the job
  7. Customer-supplied boilers
  8. Scripts for the office
  9. Example: one firm's policy
  10. Frequently asked questions
  11. References

Key takeaways

  • Decide your policy before the request comes in: fit with conditions, fit selected categories only, or decline.
  • Check suitability before agreeing: in England and Wales every water fitting must be of an appropriate quality and standard and suitable for its use[1].
  • You still owe reasonable care and skill in fitting it[2], and you cannot contract out of that duty[3]; be clear that the part itself is the customer's responsibility.
  • Price the extra risk and time openly, through your labour price or a set supply-and-fit difference, not a hidden surcharge.
  • Gas appliances must only be fitted by a registered engineer[4], whoever buys them.

Why customers supply their own parts

Customers buy their own taps, showers, radiators and even boilers for understandable reasons. They have seen a lower price online, they want a particular style, or a relative works in the trade. Online buying is normal for most people: 87% of adults in Great Britain had shopped online in the year to early 2020, in the latest ONS release on the subject[5]. For a plumbing firm, these requests are a growing share of enquiries, and handling them badly leads to arguments about warranties, wrong parts and who pays when something fails.

Adults in Great Britain who shopped online in the previous 12 months, early 2020
Adults in Great Britain who shopped online in the previous 12 months, early 2020Donut chart. Shopped online: 87%.Shopped online: 87%87%
  • Shopped online 87%

Source: Office for National Statistics, 2020[5]

Show the data
ItemValue
Shopped online87%

A written policy, applied the same way every time, protects both sides. It tells the customer what to expect before they buy, and it gives your office a clear answer instead of a different one from each person who picks up the phone.

Three policy options

Policy options for customer-supplied parts, with who each suits
PolicyHow it worksSuitsDownside
Fit with conditionsYou fit customer-supplied parts after a suitability check, with clear terms on warranty and liabilityMost domestic firms; customers who want a choiceMore admin and some risk of wasted visits
Fit selected categories onlyYou fit customer-supplied sanitaryware, taps and radiators, but supply all valves, controls and boilers yourselfFirms that want to protect safety-critical and warranty-heavy workNeeds a clear list so the office can answer instantly
Supply and fit onlyYou only fit parts you supplyFirms with strong demand and a premium positionSome customers will go elsewhere

Most firms land on the middle option. Cosmetic items such as taps, basins, towel rails and radiators are easy to check and low risk. Boilers, cylinders, controls, pumps and valves carry more risk and more warranty conditions, so many firms prefer to supply those themselves.

Check suitability before you agree

Ask for the make, model and a link or photo before you book the job. Several things can make a part unsuitable, and it is far cheaper to find out on the phone than on site.

  • Water fittings standards: in England and Wales, every water fitting must be of an appropriate quality and standard and suitable for the circumstances in which it is used, which in practice means conforming to an appropriate British Standard or equivalent specification[1]. Cheap imported taps and valves often fall short.
  • Pressure and system type: a high-pressure shower valve on a low-pressure gravity system, or a combi-only tap on an open-vented system, will not perform.
  • Size and connections: radiator outputs for the room, pipe centres, tail lengths and thread types.
  • Completeness: missing brackets, cartridges, flue kits or fittings that turn a half-day job into a second visit.
  • Gas appliances: any boiler or gas appliance must be fitted by someone in a class approved by the HSE, which in practice means a Gas Safe registered engineer[4], and the manufacturer's warranty may require registration by the installer.
  • Notifications: installing or replacing a heating system can need building regulations approval, though the homeowner does not need to apply separately if the installer is registered with a competent person scheme[6].

Warranty and liability: who is responsible for what

The key distinction is between the part and the work. When you fit a part the customer supplied, the customer's rights about the part itself are against the seller they bought it from. Your responsibility is the fitting. Every contract to supply a service includes a term that the trader will perform it with reasonable care and skill[2], and a term that tries to exclude that liability is not binding on a consumer[3].

So you cannot say 'we accept no responsibility for anything' when fitting customer parts. What you can say, clearly and fairly, is that you guarantee your workmanship, that the part's own warranty is between the customer and the seller, and that a return visit to replace a faulty customer-supplied part is chargeable. Put that in your terms and in the booking confirmation, not in small print the customer sees after the job.

Example wording: 'We are happy to fit parts you have bought yourself, once we have checked they are suitable. We guarantee our workmanship. Any fault with the part itself is covered by the seller or manufacturer, not by us, and a return visit to remove or replace a faulty part you supplied is charged at our normal rates.'

Pricing customer-supplied jobs fairly

When you supply a part, your materials margin pays for specifying, collecting, guaranteeing and handling it. When the customer supplies it, you lose that margin but often keep some of the work: checking the part, dealing with missing pieces, and sometimes a wasted visit. There are three fair ways to reflect that:

  • Charge the job on time rather than a fixed price, so extra time caused by the part is paid for.
  • Use a slightly higher labour price for fit-only jobs, stated openly: 'fit only' and 'supply and fit' as two lines on your price list.
  • Add a set charge for a wasted visit if the part turns out to be unsuitable or incomplete on the day, agreed at booking.

Avoid a hidden surcharge or an unexplained higher figure. Customers who feel penalised for buying their own part will say so in reviews. Customers who were told the rules in advance rarely complain. For how materials margins work when you do supply the parts, see marking up materials.

On the day of the job

  1. Check before unpacking

    Confirm the part matches what was agreed, is complete and is undamaged. Photograph the box, the label and any markings.

  2. Stop if it is unsuitable

    If the part is wrong, damaged or does not meet standards, explain why, record it on the job sheet and do not fit it. Offer to supply a suitable alternative.

  3. Fit and test as normal

    Your standard of work does not change because the customer bought the part. Test, commission and record as you would for your own.

  4. Record the source

    Note on the job sheet and invoice that the part was customer-supplied, with make and model. This matters if a fault appears months later.

  5. Hand over the paperwork

    Give the customer the manufacturer's instructions and warranty information, and complete any registrations you are responsible for.

Customer-supplied boilers

Boilers are the request that causes most trouble. Customers see a low online price for a boiler and expect to save the difference. In practice, the right boiler depends on the property's hot water demand, gas supply, flue route and system, and a boiler bought before a survey is often the wrong size or type. Warranty terms may also depend on the installer registering the boiler and on a filter and system clean being fitted.

Many firms decline customer-supplied boilers altogether, or accept them only after a paid survey confirms the model is suitable. If you do fit them, make the scope explicit: what you will supply (flue extensions, filter, controls, chemicals), what the customer has supplied, and who registers the warranty. A clear boiler replacement quote helps customers see what is actually included beyond the boiler itself.

Scripts for the office

  • When the customer asks: 'Yes, we can fit parts you've bought. Could you send us the make and model or a link before you order, so we can check it'll work with your system? It saves you buying the wrong thing.'
  • When it is a category you do not fit: 'For boilers and valves we supply the parts ourselves, because we guarantee them and they need to match the system exactly. For taps, basins and radiators we're happy to fit yours.'
  • When the part is unsuitable: 'Unfortunately this one isn't suitable for your system because of the water pressure. You should be able to return it. We can supply one that will work and fit it on the same visit.'

Example: one firm's policy

Example: a fictional bathroom and heating firm in Sheffield adopts a two-list policy. It fits customer-supplied taps, basins, toilets, shower enclosures and radiators, after checking the model by email. It supplies all valves, controls, pumps, cylinders and boilers itself. Fit-only work is charged on time, and an unsuitable or incomplete part on the day means a set wasted-visit charge. The office sends the policy as a short paragraph in every quote. Over a year, disputes about customer parts drop to almost none, and a fair number of customers choose supply-and-fit once they see what the firm guarantees.

Frequently asked questions

Do plumbers have to fit parts customers buy themselves?

No. You can decide your own policy: fit with conditions, fit only some categories, or supply and fit only. Make the policy clear before booking.

Who is responsible if a customer-supplied part fails?

The customer's rights about the part itself are against the seller. You remain responsible for fitting it with reasonable care and skill[2], and a term excluding that duty is not binding on a consumer[3].

Can I fit a boiler the customer bought online?

Only if you are Gas Safe registered[4] and the boiler is suitable for the property. Many firms require a survey first and confirm who registers the warranty.

References

  1. legislation.gov.uk (The National Archives) (1999). The Water Supply (Water Fittings) Regulations 1999, regulation 4 (opens in a new tab) ↑

  2. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 49 (opens in a new tab) ↑

  3. legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 57 (opens in a new tab) ↑

  4. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑

  5. Office for National Statistics (2020). Internet access - households and individuals, Great Britain: 2020 (opens in a new tab) ↑

  6. GOV.UK (2026). Building regulations approval (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo