Heat pumps low carbon

Home Energy Scotland grants and loans: the installer's role

How the Home Energy Scotland Grant and Loan works for heat pumps and insulation, what installers must hold, and how to quote so funding goes smoothly.

Ava research teamPublished 7 min read

On this page
  1. Scotland runs its own system
  2. What is on offer
  3. Eligibility rules installers must know
  4. What the installer must hold
  5. Questions to ask on the first call
  6. How a funded job runs
  7. Explaining the loan without giving financial advice
  8. Worked Example: a rural bungalow off the gas grid
  9. Common pitfalls
  10. Building a Scottish low-carbon offer
  11. Frequently asked questions
  12. References

Key takeaways

  • The Boiler Upgrade Scheme covers England and Wales only; Scotland has its own grants and loans[1].
  • Home Energy Scotland offers up to £7,500 in grant for a heat pump plus an optional £7,500 interest-free loan, with a £1,500 uplift for rural and island homes[2].
  • Only heat pumps providing 100% of heating and hot water are eligible for the grant, and replacement heat pumps can get a loan but not a grant[2].
  • Installer and product must be MCS certified for clean heating; some insulation measures need a TrustMark registered installer[2].
  • Your quote has to match what the customer's funding covers, so align it with the EPC recommendations and split heating from insulation clearly.

Scotland runs its own system

If you work in Scotland, forget the England and Wales grant rules. The Boiler Upgrade Scheme is open in England and Wales only, and Scotland has separate loans and grants[1]. For most homeowners that means the Home Energy Scotland Grant and Loan, which combines grant funding with interest-free loans for heating and energy efficiency improvements.

There are 3,260 plumbing, heat and air-conditioning installation business sites in Scotland[3]. The firms among them that understand how this funding works, and can explain it calmly to a customer, have a clear advantage over those who quote as if the English scheme applied.

The model is different in a way that matters for installers. Under the English scheme the installer applies on the customer's behalf[4]. Under Home Energy Scotland the customer applies, usually with help from a Home Energy Scotland adviser, and your job is to provide a quote and an installation that fit what has been offered. Get that wrong and the customer's funding can be delayed or reduced, which lands back on you as a payment problem.

What is on offer

For heat pumps and other clean heating, Home Energy Scotland lists grant funding of up to £7,500, with a further £7,500 available as an optional interest-free loan[2]. An uplift of £1,500 is available for rural and island homes on both the heating and energy efficiency grants, and Home Energy Scotland says rural households can claim up to £18,000 in grant funding[2].

For energy efficiency improvements, the grant covers up to 75% of the combined cost, capped at £7,500, with loans for the remainder up to each improvement's limit[2]. The chart shows the maximum grant and loan for the main measures.

Home Energy Scotland maximum grant and loan by measureRural and island homes get a £1,500 uplift on heating and energy efficiency grants
Home Energy Scotland maximum grant and loan by measureBar chart. Heat pump: Grant £7,500, Loan £7,500; Solid wall insulation: Grant £7,500, Loan £2,500; Flat roof or room-in-roof: Grant £3,000, Loan £1,000; Loft, cavity or underfloor: Grant £1,500, Loan £500.Heat pumpHeat pump · Grant: £7,500£7,500Heat pump · Loan: £7,500£7,500Solid wall insulationSolid wall insulation · Grant: £7,500£7,500Solid wall insulation · Loan: £2,500£2,500Flat roof or room-in-roofFlat roof or room-in-roof · Grant: £3,000£3,000Flat roof or room-in-roof · Loan: £1,000£1,000Loft, cavity or underfloorLoft, cavity or underfloor · Grant: £1,500£1,500Loft, cavity or underfloor · Loan: £500£500Home Energy Scotland maximum grant and loan by measureBar chart. Heat pump: Grant £7,500, Loan £7,500; Solid wall insulation: Grant £7,500, Loan £2,500; Flat roof or room-in-roof: Grant £3,000, Loan £1,000; Loft, cavity or underfloor: Grant £1,500, Loan £500.Heat pumpHeat pump · Grant: £7,500£7,500Heat pump · Loan: £7,500£7,500Solid wall insulationSolid wall insulation · Grant: £7,500£7,500Solid wall insulation · Loan: £2,500£2,500Flat roof or room-in-roofFlat roof or room-in-roof · Grant: £3,000£3,000Flat roof or room-in-roof · Loan: £1,000£1,000Loft, cavity or underfloorLoft, cavity or underfloor · Grant: £1,500£1,500Loft, cavity or underfloor · Loan: £500£500
  • Grant
  • Loan

Source: Home Energy Scotland, 2026[2]

Show the data
ItemGrantLoan
Heat pump£7,500£7,500
Solid wall insulation£7,500£2,500
Flat roof or room-in-roof£3,000£1,000
Loft, cavity or underfloor£1,500£500

Treat these as maximums, not what every customer will get. The offer depends on the home, the measures recommended and the customer's application.

Eligibility rules installers must know

  • Only heat pumps that provide 100% of the home's heating and hot water are eligible for the heating grant[2]. A hybrid that keeps a boiler for hot water will not qualify.
  • Replacement heat pumps are not eligible for the grant but can receive an interest-free loan of up to £7,500[2].
  • For energy efficiency measures, an EPC must recommend the improvement[2]. Check the EPC before you quote insulation as part of a package.
  • Spray foam insulation is not funded[2].
  • Funding rules change, so check the Home Energy Scotland site for the current version before every quote that relies on them.

These rules shape your design. If you plan a heat pump that will not cover full hot water demand, or a system that keeps the old boiler as backup, the customer may lose the grant. Design for full heating and hot water from the start, and size the cylinder accordingly; see our guide to heat pump cylinders.

What the installer must hold

Installer requirements for Home Energy Scotland funded measures.
MeasureInstaller requirementPractical note
Heat pumps and other clean heatingInstaller and product must be MCS certifiedCheck the specific model is MCS listed, not just the brand
Solid wall, underfloor, flat roof and room-in-roof insulationInstaller must be TrustMark registeredUse a registered partner if you do not hold it
Other energy efficiency measuresNo specific installer scheme requiredStill expect evidence of competent installation
Micro-hydroAssessed case by caseRare for heating firms

These requirements come straight from Home Energy Scotland's guidance[2]. If you do not hold TrustMark, partner with a registered insulation installer and say so on the quote; our guide to TrustMark registration explains what it involves.

Questions to ask on the first call

  1. Is the home in a rural or island location? It affects the grant uplift.
  2. How is the home heated now, and how is hot water made?
  3. Does the home already have a heat pump? A replacement can only get a loan.
  4. Is there a current EPC, and does it recommend the measures you are discussing?
  5. Has the customer already spoken to Home Energy Scotland, and what were they told?
  6. Would they consider the interest-free loan, or do they plan to pay the balance themselves?

The answers tell you, before you drive out, whether the job is likely to fit the funding and which documents you will need. Note them on the enquiry record so whoever surveys the home does not ask the customer the same questions again.

How a funded job runs

  1. Customer contacts Home Energy Scotland

    Encourage customers to speak to an adviser early. They will explain which funding applies and what the customer needs.

  2. Survey and design

    Do a full heat loss survey and design for 100% of heating and hot water, as the grant requires[2]. Check the EPC for any insulation you plan to include.

  3. Quote to the funding

    Split the quote into clearly labelled measures, matching the names used by the scheme, with the MCS or TrustMark details for each.

  4. Wait for the offer

    Do not start work until the customer has written confirmation of the grant and any loan. Check the current terms on how claims are made.

  5. Install and commission

    Fit to the design and MCS standards, keep photographs and commissioning records, and give the customer the documents the claim needs.

  6. Support the claim

    Make sure the invoice matches the quote and the offer. Differences cause delays.

Explaining the loan without giving financial advice

Customers often ask whether they should take the interest-free loan. That is their decision, and you are not the right person to advise on it. What you can do is make the numbers easy to follow: show the full cost, the grant expected, the balance, and the part of the balance the loan could cover, as separate lines. Point them to Home Energy Scotland for the loan terms and repayment details, and avoid any wording that sounds like you are arranging credit. A clear quote that separates grant, loan and customer contribution prevents the most common misunderstanding, which is a customer who believed the whole job was free.

Worked Example: a rural bungalow off the gas grid

Example (fictional): an oil-heated bungalow in rural Aberdeenshire with a 25-year-old boiler and a loft insulated decades ago. The EPC recommends loft insulation and an air source heat pump.

In the Example, the installer designs a heat pump for full heating and hot water with a new cylinder, and partners with a local insulation firm for the loft. The quote lists the heat pump and the loft insulation as separate measures. As a rural home, the customer's heat pump grant can include the £1,500 uplift on top of the £7,500 grant[2], and they can take the optional interest-free loan for part of the balance. The installer waits for the written offer before ordering the unit, then fits within the timescale the offer allows.

Common pitfalls

  1. Quoting a hybrid or a heat pump that does not meet full hot water demand, which loses the heating grant.
  2. Including insulation the EPC does not recommend, which the scheme will not fund.
  3. Using an installer for TrustMark-required insulation who is not registered.
  4. Starting work before the customer's offer is confirmed.
  5. Invoicing for different equipment from the quote without telling the customer and the scheme.
  6. Using English scheme wording on Scottish quotes, which confuses customers about who applies and what they get.

Rural and island work brings its own challenges: travel time, lead times for materials and a customer base that is often heating with oil or LPG. Around four million UK homes are off the gas grid[5], and many of the Scottish ones are exactly the properties this funding was designed for.

Building a Scottish low-carbon offer

The firms doing well with this funding tend to have three things: an MCS certified heat pump installer, a reliable TrustMark registered insulation partner and someone in the office who understands the scheme well enough to guide customers. Just under 10,000 people completed a recognised heat pump qualification across the UK in 2024[6], so training capacity exists; the bottleneck is usually survey time and scheme know-how.

If you also work for landlords, Scottish rented housing has its own safety and repairing standards; see our guide to Scottish private landlord safety. If you work across borders, compare this model with the Nest scheme in Wales and heating in Northern Ireland.

Frequently asked questions

Can Scottish customers use the Boiler Upgrade Scheme?

No. The Boiler Upgrade Scheme is open in England and Wales; Scotland has separate loans and grants[1].

How much is the Home Energy Scotland heat pump grant?

Up to £7,500 in grant, with an optional £7,500 interest-free loan and a £1,500 uplift for rural and island homes[2].

Does the installer need MCS for Home Energy Scotland funding?

Yes for clean heating and renewables: the installer and the product must be MCS certified[2].

Are hybrid heat pumps eligible in Scotland?

Only heat pumps that provide 100% of heating and hot water are eligible for the grant[2], so a hybrid that relies on a boiler will not qualify.

References

  1. GOV.UK (2026). Apply for the Boiler Upgrade Scheme (opens in a new tab) ↑

  2. Home Energy Scotland (2026). Home Energy Scotland Grant and Loan (opens in a new tab) ↑

  3. Office for National Statistics (Nomis) (2026). UK Business Counts - local units by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑

  4. GOV.UK (2026). Apply for the Boiler Upgrade Scheme: how to apply (opens in a new tab) ↑

  5. Heating and Hotwater Industry Council (HHIC) (2026). HHIC and OFTEC urge Government to back hybrid heating systems to support off-grid households (opens in a new tab) ↑

  6. Heating and Hotwater Industry Council (HHIC) (2024). Bumper year for UK heat pumps (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo