Key takeaways
- Your diary is your stock. Employee plumbers already work a median 40 paid hours a week, against 36.9 for all employees[1].
- Turn down work that is outside your competence, unprofitable at any sensible price, or likely to cause a dispute.
- A clear minimum charge removes many small jobs without anyone having to say no.
- Refuse quickly and kindly, and give the caller somewhere else to go. A helpful no protects your reputation.
- Build a referral list of trusted local trades, and agree that referrals run both ways.
Saying no is a pricing decision
Every plumbing and heating business has a fixed number of hours to sell. A small job that takes two hours including travel, parking and paperwork displaces two hours of something else, whether that is a boiler install, a service round or an evening with your family. The question is not whether the small job is worth anything, but whether it is worth more than what it pushes out.
The trade already works long weeks. Employee plumbers and heating and ventilating installers had median total paid hours of 40 a week in 2026, against 36.9 for all UK employees[1]. Most firms are micro businesses[2], where the owner is also the main engineer, so every low-value job comes straight out of the most valuable time in the business.
Source: Office for National Statistics, 2026[1]
Show the data
| Item | Value |
|---|---|
| Plumbers and heating installers | 40 hours |
| All employees | 36.9 hours |
Jobs that are usually worth declining
| Job | Why it is a problem | Better response |
|---|---|---|
| Fitting customer-supplied taps or showers of unknown quality | Faults get blamed on you; returns are time-consuming | Fit only with a written note that you are not responsible for the product, or decline |
| Gas work outside your registered categories | Illegal if you are not competent and registered for it | Refer to a registered engineer with the right categories |
| Partial repairs the customer wants to ‘finish themselves’ | You are linked to the result but control none of it | Offer the full job or decline |
| Very small jobs far outside your area | Travel eats the margin | Refer to a local firm |
| Repeatedly ‘just having a look’ with no intention to proceed | Unpaid diagnostic time | Charge for diagnostic visits, credited against work |
| Work that cannot be done safely or to regulations at the budget | Liability and reputation risk | Explain why and decline in writing |
Gas work deserves a particular note. By law, no one may carry out work on a gas fitting unless they belong to a class of persons approved by HSE, which in practice means Gas Safe registration for the relevant work[3]. If a request falls outside your categories, the only correct answer is a referral.
Let a minimum charge do the work
Many small jobs are not bad jobs. They are just priced as if they took ten minutes, when the real cost includes the drive, the parking, the stock in the van and the invoice. A stated minimum charge, covering the first hour or the call-out plus a set amount of time, solves most of this without any refusal at all.
- Publish the minimum charge on your website and say it on the phone, so customers decide before you arrive.
- Explain what it includes: travel, the first period on site, and standard small parts.
- Encourage customers to save up small jobs: ‘While we're there, is there anything else on your list?’
- Offer a bundled visit for a list of small jobs at a half-day or day rate.
Customers who balk at a fair minimum charge for a dripping tap are usually better served by a handyperson, and you can say so politely.
Decision criteria for any job
When you are unsure, run the job through five quick questions. If it fails two or more, decline or refer.
- Competence: is this work you are trained, registered and insured to do?
- Value: will the job, at a price the customer will accept, earn at least your minimum hourly target including travel?
- Fit: does it lead somewhere, such as a service customer, a landlord with other properties, or a likely future install?
- Risk: is there a high chance of a dispute, a call-back or blame for someone else's product or work?
- Timing: can you do it within a time the customer will consider reasonable? Where no time is agreed, a service must be performed within a reasonable time[4].
Write the answers down for a month. Patterns appear quickly, and you will often find that a few job types cause most of the problems.
Existing customers are a different case
The rules above are for new enquiries. A service customer of ten years, or a landlord who gives you all their boiler work, may ask for small jobs you would decline from a stranger. Often the right answer is yes, because the relationship is worth more than the hour.
- Fit their small jobs into visits you are already making, such as the annual service, rather than making a special trip.
- Still charge properly. Loyal customers expect to pay; they mostly want to be fitted in.
- Be honest when a job is not for you, even for a regular: ‘That's really an electrician's job. I'd rather send you to someone I trust than do it half-right.’
- Keep a short note on each key customer of what you do and do not do for them, so the office can answer without checking with you.
Whatever you take on, the same standard applies: every service must be performed with reasonable care and skill[5]. A favour done badly is still your work.
‘But you did it last time’
When you change what you will do, some customers will notice. Explain the change once, simply and without apology: ‘We've stopped doing single small repairs so we can get to emergencies and installs faster. For a list of small jobs we can do a half-day visit, or I can give you the number of a good local handyperson.’ Put the same message on your website and in the script for whoever answers the phone, so customers hear one consistent answer. Most will accept it; the ones who do not were rarely your most profitable customers.
Scripts for a polite refusal
- On the phone, outside your area: ‘Thanks for thinking of us. You're a bit outside the area we cover, so we wouldn't get to you as quickly as you'd want. [Firm name] is local to you and does this kind of job; here's their number.’
- Customer-supplied product: ‘We're happy to fit taps we supply, because we can stand behind them. If you'd like to use your own, we can fit them on the basis that any faults with the product itself sit with the retailer. Would that work for you?’
- Too small for a visit: ‘For a single washer change it would cost you more for us to come out than the job is worth. If you have a few small jobs, we can do them all in one visit, or a local handyperson would be a good option.’
- Outside your competence: ‘That isn't something we do ourselves, and I'd rather you had someone who does it every day. I'd recommend [name], who we've worked with before.’
Say no quickly. A caller who waits three days for a reply and then hears no is far more annoyed than one who hears a kind no the same day with a useful alternative.
Build a referral network
List the gaps
Jobs you regularly decline: small repairs, drainage, electrics, unvented cylinders, commercial catering, specific gas categories.
Find one trusted firm for each
Ask merchants, other trades and customers for names, and check registrations and reviews yourself.
Agree the terms
Referrals both ways, how quickly each side responds, and whether any referral fee is paid and disclosed.
Keep the list where calls are answered
Whoever takes your calls needs the names and numbers, not just the owner.
Review twice a year
Drop anyone who lets your referrals down. Your name is on every introduction.
Protect your reputation when you say no
A refusal can still leave a customer thinking well of you. Most poor reviews about declined work come from silence, not from the no itself. Respond to every enquiry, give a reason, offer an alternative and thank them for asking. Customers remember the plumber who helped them find someone else, and many come back for the bigger job later.
Example: freeing two days a month
Example (fictional): a sole trader in Lincoln logged every small job for a month and found that eleven jobs under an hour each had taken nearly two full days including travel. He introduced a published minimum charge, a bundled half-day rate for lists of small jobs, and a referral arrangement with a local handyperson. Over the next quarter he did fewer small jobs, earned more from those he did, and used the freed days for two extra boiler installs a month.
Every yes is a no to something else. Decide what you are saying no to before you answer the phone.
Frequently asked questions
Is it unprofessional to turn down small plumbing jobs?
No, if you do it quickly, politely and with a useful alternative. Taking every job regardless of fit is what usually damages service.
Should I fit taps and showers that customers buy themselves?
Only on the clear written basis that faults with the product sit with the retailer, or decline. Otherwise you carry the blame for parts you did not choose.
How do I set a minimum charge?
Cover travel, parking, the first period on site and standard small parts, publish it, and say it on the phone so customers decide before you arrive.
Can I take a referral fee from another trade?
If you do, be open about it with the customer, and only refer to firms you would trust in your own home.
References
Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 3 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 52 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 49 (opens in a new tab) ↑