Metrics growth

Gross margin vs net profit for a heating firm

Gross margin, markup and net profit explained for plumbing and heating firms, with a markup-to-margin table, a worked Example and margin by job type.

Ava research teamPublished 7 min read

On this page
  1. Two measures, two jobs
  2. The definitions
  3. Markup is not margin
  4. Where your firm sits
  5. Margin by job type
  6. Example: a simple profit and loss
  7. Overheads: the half owners skip
  8. Things that distort the numbers
  9. From margin to decisions
  10. Frequently asked questions
  11. References

Key takeaways

  • Gross margin is what is left from sales after the direct costs of doing the work; net profit is what is left after every overhead as well.
  • Markup and margin are not the same: a 50% markup on materials is a 33% margin. Price from margin.
  • Most registered plumbing and heating firms are small: 19,630 had turnover of £100,000 to £249,000 in 2026, the largest band[1]. Benchmarks for large firms rarely fit.
  • Your best benchmark is your own accounts: margin by job type, compared year on year.
  • Decide once where vans and engineer on-costs sit, then keep it consistent or the trend means nothing.

Two measures, two jobs

Gross margin tells you whether the work itself is priced properly. Net profit tells you whether the business as a whole makes money once the office, insurance, software, marketing and everything else has been paid. A firm can have a healthy gross margin and still lose money if overheads have crept up; it can also have tight overheads and still struggle because the work is priced too low.

Most owners look at net profit once a year when the accountant sends the accounts. Gross margin is the number to watch monthly, because it is the one you can change quickly: through prices, through what you buy, and through how much engineer time each job takes.

The definitions

  • Sales: turnover excluding VAT. If you are VAT registered, every margin calculation should use net figures.
  • Direct costs, also called cost of sales: materials and parts used on jobs, subcontractors, and the wages and on-costs of the engineers doing the work, including employer National Insurance and pension.
  • Gross profit: sales minus direct costs.
  • Gross margin: gross profit divided by sales, as a percentage.
  • Overheads: costs that do not change job by job, such as office staff, rent, insurance, accountancy, software, marketing, phones and, depending on your choice, vans.
  • Net profit: gross profit minus overheads. For a sole trader this is before the owner's drawings and tax; for a limited company it is usually after directors' salaries but before Corporation Tax and dividends.

Employer on-costs belong in direct labour if you want a true picture. Employers pay 15% secondary National Insurance on earnings above £5,000 a year in 2026 to 2027[2], plus pension contributions, holiday and sick pay. Leaving them out flatters gross margin and makes engineers look cheaper than they are.

Markup is not margin

Many firms add a markup to parts and materials, then talk about it as a margin. The two are calculated on different bases. Markup is profit as a share of cost; margin is profit as a share of the selling price. The gap matters when you are working out what a job really makes.

Converting markup to margin (arithmetic, Example prices)
Markup on costResulting margin on priceExample: part costing £100 sells for
10%9.1%£110
20%16.7%£120
25%20%£125
33.3%25%£133
50%33.3%£150
100%50%£200

The formula is margin = markup divided by (1 + markup). Working the other way, markup = margin divided by (1 - margin). Example: to reach a 30% gross margin on a material, you need a markup of about 43%, not 30%.

Where your firm sits

Registered plumbing and heating enterprises by annual turnover, 2026UK, SIC 43.22; VAT or PAYE-registered enterprises only
Registered plumbing and heating enterprises by annual turnover, 2026Column chart. Under £50k: 2,405 enterprises; £50k to £99k: 13,030 enterprises; £100k to £249k: 19,630 enterprises; £250k to £499k: 6,095 enterprises; £500k to £999k: 3,140 enterprises; £1m to £1.99m: 1,735 enterprises; £2m to £4.99m: 1,080 enterprises; £5m to £9.99m: 470 enterprises; £10m to £49.99m: 290 enterprises; £50m and over: 40 enterprises.0 enterprises5,000 enterprises10,000 enterprises15,000 enterprises20,000 enterprisesUnder £50k: 2,405 enterprises2,405 enterprisesUnder£50k£50k to £99k: 13,030 enterprises13,030 enterprises£50k to£99k£100k to £249k: 19,630 enterprises19,630 enterprises£100kto£249k£250k to £499k: 6,095 enterprises6,095 enterprises£250kto£499k£500k to £999k: 3,140 enterprises3,140 enterprises£500kto£999k£1m to £1.99m: 1,735 enterprises1,735 enterprises£1m to£1.99m£2m to £4.99m: 1,080 enterprises1,080 enterprises£2m to£4.99m£5m to £9.99m: 470 enterprises470 enterprises£5m to£9.99m£10m to £49.99m: 290 enterprises290 enterprises£10m to£49.99m£50m and over: 40 enterprises40 enterprises£50mandoverRegistered plumbing and heating enterprises by annual turnover, 2026Column chart. Under £50k: 2,405 enterprises; £50k to £99k: 13,030 enterprises; £100k to £249k: 19,630 enterprises; £250k to £499k: 6,095 enterprises; £500k to £999k: 3,140 enterprises; £1m to £1.99m: 1,735 enterprises; £2m to £4.99m: 1,080 enterprises; £5m to £9.99m: 470 enterprises; £10m to £49.99m: 290 enterprises; £50m and over: 40 enterprises.Under £50kUnder £50k: 2,405 enterprises2,405 enterprises£50k to £99k£50k to £99k: 13,030 enterprises13,030 enterprises£100k to £249k£100k to £249k: 19,630 enterprises19,630 enterprises£250k to £499k£250k to £499k: 6,095 enterprises6,095 enterprises£500k to £999k£500k to £999k: 3,140 enterprises3,140 enterprises£1m to £1.99m£1m to £1.99m: 1,735 enterprises1,735 enterprises£2m to £4.99m£2m to £4.99m: 1,080 enterprises1,080 enterprises£5m to £9.99m£5m to £9.99m: 470 enterprises470 enterprises£10m to £49.99m£10m to £49.99m: 290 enterprises290 enterprises£50m and over£50m and over: 40 enterprises40 enterprises

Source: Office for National Statistics (Nomis), 2026[1]

Show the data
Turnover bandValue
Under £50k2,405 enterprises
£50k to £99k13,030 enterprises
£100k to £249k19,630 enterprises
£250k to £499k6,095 enterprises
£500k to £999k3,140 enterprises
£1m to £1.99m1,735 enterprises
£2m to £4.99m1,080 enterprises
£5m to £9.99m470 enterprises
£10m to £49.99m290 enterprises
£50m and over40 enterprises

Official business counts show how small most firms in the trade are. Of 47,910 VAT or PAYE-registered plumbing, heating and air-conditioning enterprises in 2026, 19,630 turned over £100,000 to £249,000 and 13,030 turned over £50,000 to £99,000; only 1,880 turned over £2 million or more[1]. Many sole traders below the VAT threshold of £90,000[3] are not registered for VAT or PAYE and do not appear in these counts at all.

That spread is why published margin benchmarks are of limited use. A large installer with a buying team and contract pricing has a different cost base from a two-van firm doing breakdowns. Most construction SME employers report a profit, 80% in 2025[4], so the more useful question is not whether you are profitable but which of your job types carry that profit.

Margin by job type

Overall gross margin is an average of very different kinds of work. Split it and the picture changes. Breakdowns can carry a strong margin per hour but lose it on travel and return visits. Replacements can look thin as a percentage because the boiler is a large pass-through cost, yet carry the best profit per engineer day. Contract work for landlords often runs on rate cards set years ago.

  1. Tag every invoice

    Give each invoice a work type: repair, service, replacement, project, contract. Most accounting packages and job systems support a category or tracking field.

  2. Attach direct costs

    Record materials and subcontractors against the job. For labour, use hours on the job multiplied by a loaded hourly cost that includes on-costs.

  3. Calculate margin per type

    Gross profit divided by sales for each type, monthly and for the rolling year.

  4. Add profit per engineer day

    Divide gross profit for each type by the engineer days it used. This shows which work is worth more of your diary.

  5. Act on the weakest type

    Reprice it, change how it is done, or decide to do less of it.

Example: a simple profit and loss

Example: a fictional three-engineer firm in Cardiff has sales of £420,000 excluding VAT. Materials and parts cost £150,000, subcontract electricians £18,000 and engineers' wages with on-costs £135,000. Direct costs total £303,000, so gross profit is £117,000 and gross margin is 27.9%.

Example overheads: office manager £30,000 with on-costs, vans and fuel £33,000, insurance £6,000, software and phones £7,000, accountancy £4,000, marketing £9,000 and other costs £8,000, a total of £97,000. Net profit before the owner's drawings or salary is £20,000, or 4.8% of sales.

Example reading: split by type, replacements carry a 24% margin but £780 of gross profit per engineer day, while breakdowns carry 38% but only £410 per day once return visits are counted. The owner decides to push summer replacements harder and to fix the return-visit problem before raising breakdown prices. A 3-point improvement in gross margin, to about 31%, would add around £12,600 of net profit on the same sales.

Overheads: the half owners skip

Overheads grow quietly. A new software subscription here, a second phone line there, a bigger van lease when the old one is replaced. None of them feels large, but together they decide whether a decent gross margin turns into a decent net profit.

  1. List every overhead from the last twelve months of bank statements, not from memory.
  2. Group them: people, premises, vehicles, insurance, software and phones, professional fees, marketing, other.
  3. Mark each one as essential, useful or unused. Cancel the unused ones the same day.
  4. Divide total overheads by the number of billable engineer hours to see how much each sold hour must carry before it makes any profit.
  5. Repeat the exercise each year before you set prices.

The overhead per billable hour is the number that links the two halves of this article. If it rises faster than your hourly rate, net profit will fall even while gross margin looks steady.

Things that distort the numbers

  • VAT included in some figures and not others. Always use net-of-VAT sales and costs.
  • Materials bought for jobs not yet invoiced, which make this month look worse and next month look better. Count work in progress at month end, even roughly.
  • Construction Industry Scheme deductions treated as a cost. They are tax paid on account, not an expense.
  • Vans moved between direct costs and overheads from one year to the next.
  • The owner's own labour left out. If you work on the tools, cost your hours at what you would pay an engineer, or the margin flatters the business.

Ask your accountant to set up the chart of accounts so cost of sales and overheads match the way you run the business. It is a one-off job that makes every later report more useful.

From margin to decisions

Once margin by job type is visible, three decisions follow. Which work to promote in quiet months, which prices to change first, and which customers or contracts to renegotiate. Pair the margin figures with break-even analysis to see how many jobs each van needs, and with debtor days to make sure the profit turns into cash.

If customers push for discounts, the markup table above shows how fast a small reduction eats margin. Our guide to discounting without losing margin covers when a lower price is worth it and how to give one without training customers to wait for it.

Frequently asked questions

What is the difference between gross margin and net profit?

Gross margin is sales minus the direct costs of doing the work, as a share of sales. Net profit is what remains after overheads such as office staff, insurance, software and marketing are also paid.

Is a 50% markup the same as a 50% margin?

No. A 50% markup on cost gives a 33.3% margin on the selling price. To reach a 50% margin, you need a 100% markup.

Should vans be a direct cost or an overhead?

Either can work. What matters is choosing once and keeping it consistent, so margins compare fairly from year to year.

What gross margin should a plumbing business aim for?

It depends on the work mix and size. Use your own accounts as the benchmark: track margin by job type, find the weakest and improve it, rather than chasing a single industry figure.

References

  1. Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and turnover size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑

  2. GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑

  3. GOV.UK (2026). When to register for VAT (opens in a new tab) ↑

  4. Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo