Tax finance admin

What an employee really costs: NI, pension and holiday

The full cost of hiring an engineer in 2026 to 2027: employer National Insurance, Employment Allowance, pension, holiday, sick pay and kit, with Example.

Ava research teamPublished 6 min read

On this page
  1. Salary is only the start
  2. What engineers are paid
  3. Employer National Insurance and the Employment Allowance
  4. Pension contributions
  5. Holiday and sick pay
  6. The costs that are not on the payslip
  7. Example: costing one engineer
  8. Turning cost into a charge-out rate
  9. Cash flow in the first three months
  10. Employee, subcontractor or apprentice?
  11. Before you hire: a checklist
  12. Frequently asked questions
  13. References

Key takeaways

  • Employers pay 15% National Insurance on earnings above £5,000 a year in 2026 to 2027[1].
  • The Employment Allowance can remove up to £10,500 of employer National Insurance a year for eligible employers[2].
  • Auto-enrolment means at least 3% employer pension contributions for eligible staff[3].
  • Almost all workers are entitled to 5.6 weeks' paid holiday, which you pay for but cannot bill[4].
  • Work out cost per productive hour before you set charge-out rates for a new engineer.

Salary is only the start

The first employee is the biggest step a one-person plumbing business takes. The salary is the number everyone thinks about, but the real cost includes employer National Insurance, pension contributions, paid holiday, sick pay, a van, tools, insurance, training and the time it takes to supervise and support someone new.

Small firms feel the pressure. In 2025, 38% of UK SME employers named the National Living Wage as a major obstacle to business success, up 7 percentage points on 2024[5]. Knowing the full cost before you hire lets you price the work properly so the new engineer pays for themselves rather than eating your margin.

What engineers are paid

The median gross annual pay of full-time employee plumbers and heating and ventilating installers was £39,179 in 2026, provisional figures show, against £40,911 for all full-time UK employees[6]. Local rates vary widely, and gas-qualified engineers with a good record command more than improvers or mates.

Median gross annual pay of full-time employees, 2026 (provisional)
Median gross annual pay of full-time employees, 2026 (provisional)Comparison. Plumbers and heating and ventilating installers: £39,179; All full-time UK employees: £40,911.£39,179Plumbers and heating and ventilatinginstallersPlumbers and heating and ventilating installers: £39,179£40,911All full-time UK employeesAll full-time UK employees: £40,911Median gross annual pay of full-time employees, 2026 (provisional)Comparison. Plumbers and heating and ventilating installers: £39,179; All full-time UK employees: £40,911.£39,179Plumbers and heating and ventilatinginstallersPlumbers and heating and ventilating installers: £39,179£40,911All full-time UK employeesAll full-time UK employees: £40,911

Source: Office for National Statistics, 2026[6]

Show the data
ItemValue
Plumbers and heating and ventilating installers£39,179
All full-time UK employees£40,911

Whatever you agree, the legal floor applies: the National Living Wage for workers aged 21 and over is £12.71 an hour from April 2026 and £13.21 from April 2027[7]. Apprentices under 19, or in the first year of their apprenticeship, have a lower minimum of £8 an hour from April 2026[8]. Budget against next April's rates, not this year's, if you are hiring in the autumn.

Employer National Insurance and the Employment Allowance

For 2026 to 2027 the employer pays secondary Class 1 National Insurance at 15% on an employee's earnings above the secondary threshold of £5,000 a year[1]. This is on top of the salary and is not deducted from the employee's pay.

There are two important reliefs. First, the Employment Allowance reduces an eligible employer's annual National Insurance bill by up to £10,500[2]. A company with only one director cannot claim it if that director is the only employee liable for secondary National Insurance[9], but once you take on an engineer you usually can. For many small plumbing firms the allowance wipes out employer National Insurance on the first one or two employees. Second, employer contributions are 0% up to £50,270 a year for employees under 21 and for apprentices under 25[1], which makes apprentices and young improvers cheaper to employ.

£10,500

Employment Allowance for 2026 to 2027, off an eligible employer's National Insurance bill[2]

Pension contributions

Under automatic enrolment, the employer must pay at least 3% and the total minimum contribution is 8%[3]. In most schemes contributions are based on earnings between £6,240 and £50,270 a year[3]. Your duties start when your first member of staff starts work, not after a grace period. Our guide to workplace pensions for your first employee walks through setting it up.

Holiday and sick pay

Almost all workers are legally entitled to 5.6 weeks' paid holiday a year[4]. For someone working five days a week that is 28 days, and you can include bank holidays within it. Holiday is paid at the normal rate, so it is already in the salary, but it is time you pay for and cannot bill. It needs to be in your cost per productive hour.

Statutory Sick Pay for 2026 to 2027 is £123.25 a week or 80% of the employee's average weekly earnings, whichever is lower[10]. Many trade firms pay more than statutory sick pay for a few days to retain good staff; if you do, write it into the contract and budget for it. For the full rules, see holiday and sick pay in the trades.

The costs that are not on the payslip

  • Van: lease or finance, insurance, fuel, servicing and tax. For many firms this is the largest on-cost after salary.
  • Tools and test equipment: hand and power tools, a flue gas analyser, press tools if they will not bring their own.
  • Employers' liability insurance, which most employers must have, plus any increase in public liability cover.
  • Uniform, PPE and safety boots.
  • Phone, tablet and job management software licences.
  • Training and assessments: gas reassessments, unvented, heat pump or water regulations courses.
  • Recruitment: adverts or agency fees, and your time interviewing.
  • Supervision: the hours you spend checking work and supporting them in the first months.

Example: costing one engineer

Example (fictional): a heating firm in Leeds hires a gas-qualified engineer on £37,800 a year, five days a week. It already employs an office manager, so it can claim the Employment Allowance.

Example (fictional) first-year cost of one engineer, using 2026 to 2027 rates[1][2][3].
Cost itemExample annual costHow it is worked out
Salary£37,800Agreed pay
Employer National Insurance£4,920 before allowance15% of £32,800 above £5,000
Employment AllowanceMinus £4,920Covers the whole bill here
Employer pension£946.803% of £31,560 qualifying earnings
Van, fuel and insurance£9,500Example figure for a leased panel van
Tools, phone, uniform, training£2,400Example figure
Total£50,646.80Before supervision time

Example: the engineer is available for 232 days after 28 days of holiday. Allow some days for training, travel to the merchant and unbilled call-backs, and say 200 billable days of 7 hours. That is 1,400 billable hours, so the cost is about £36 per billable hour before your overheads and profit. If the firm could not claim the Employment Allowance, the cost would rise by £4,920 a year.

Turning cost into a charge-out rate

Cost per billable hour is the number that matters for pricing. Divide the full annual cost of the engineer by the hours you can realistically bill, not the hours they are paid for. Then add a share of your overheads, such as office costs, software, advertising and your own time running the business, and a profit margin.

Be honest about billable hours. Travel between jobs, merchant runs, quoting visits, call-backs under warranty and training days are all paid time that no customer pays for directly. If your engineer is billing six hours of a nine-hour day, plan on that, and either price for it or work on the causes. Our guide to saving for your tax bill is the other half of this sum, because a busier firm usually means a bigger January bill.

Cash flow in the first three months

A new engineer costs money before they earn it. You pay wages monthly or weekly from day one, the van lease starts on delivery, and tools and uniform are paid up front. Meanwhile their first jobs may be invoiced at the end of the month and paid weeks later, especially commercial work.

  • Build a cash buffer of at least two months of the engineer's full cost before they start.
  • Line up work in advance, ideally a run of planned installs or a servicing contract, so the diary is full from the first week.
  • Take deposits on installs and ask domestic customers to pay on completion.
  • Check payroll dates against when your largest customers pay, and move paydays if needed before the contract is signed.
  • Review progress at the end of month three: billable hours, call-backs and customer feedback.

Employee, subcontractor or apprentice?

Ways to add capacity to a small plumbing firm and the main trade-offs[1].
OptionStrengthsWatch out for
Employed engineerControl over standards, availability, loyaltyFull on-costs, holiday and sick pay, pension
Labour-only subcontractorFlexible, no employer on-costsStatus risk if they work like an employee
ApprenticeLower pay floor, 0% employer NI up to £50,270 if under 25Supervision time and college days

The subcontractor route only works if the person is genuinely self-employed. If they work only for you, on your hours, in your van, HMRC may say otherwise. Our guide to IR35 and labour-only subcontractors explains where the lines fall.

Before you hire: a checklist

  1. Cost the role in full, using next April's pay floor and your realistic van costs.
  2. Check you can claim the Employment Allowance, and claim it through payroll.
  3. Register as an employer with HMRC and set up payroll before the first payday.
  4. Choose a workplace pension scheme and diary the declaration of compliance.
  5. Arrange employers' liability insurance and update your public liability cover.
  6. Write a contract with pay, hours, holiday, sick pay, van use and on-call rules.
  7. Recalculate your charge-out rates on cost per billable hour, and plan the work that will keep the new engineer busy.
  8. Set aside more for tax if profits will rise; see setting money aside for your tax bill.

Frequently asked questions

How much does it cost to employ someone on top of their salary?

In 2026 to 2027, employer National Insurance is 15% above £5,000 a year, pension at least 3% of qualifying earnings, plus kit, van and insurance. The Employment Allowance can remove up to £10,500 of the National Insurance for eligible employers.

Can a small plumbing firm claim the Employment Allowance?

Usually yes, unless the only employee paid above the threshold is a sole director. Claim it through your payroll software.

Do I pay employer National Insurance for an apprentice?

Not on earnings up to £50,270 a year for apprentices under 25, and the same applies to employees under 21.

How many days' holiday must I give an engineer?

Almost all workers get 5.6 weeks' paid holiday a year, which is 28 days for someone working five days a week. Bank holidays can be included within that.

References

  1. GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑

  2. GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑

  3. GOV.UK (2026). Workplace pensions: what you, your employer and the government pay (opens in a new tab) ↑

  4. GOV.UK (2026). Holiday entitlement (opens in a new tab) ↑

  5. Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑

  6. Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑

  7. GOV.UK (2026). National Minimum Wage and National Living Wage rates (opens in a new tab) ↑

  8. GOV.UK (2026). National Minimum Wage and National Living Wage rates (opens in a new tab) ↑

  9. GOV.UK (2026). Employment Allowance: check if you're eligible (opens in a new tab) ↑

  10. GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo