Key takeaways
- Almost all workers get 5.6 weeks' paid holiday a year[1].
- Holiday pay at the normal rate includes commission and regular overtime, averaged over the last 52 paid weeks[2].
- Irregular-hours and part-year workers accrue 12.07% of hours worked in each pay period[3], and rolled-up holiday pay is allowed only for them[2].
- Statutory Sick Pay for 2026 to 2027 is £123.25 a week or 80% of average weekly earnings, whichever is lower[4].
- Since 6 April 2026 there are no SSP waiting days and no Lower Earnings Limit, so short absences and low-paid staff are now covered[5].
Why engineers' pay makes this harder
Holiday and sick pay are simple for someone on a fixed salary with fixed hours. Heating engineers are rarely like that. Their pay mixes a basic rate, weekday and weekend overtime, standby payments for on-call weeks, call-out pay and sometimes bonuses for sold work. Winter weeks look nothing like summer weeks. If holiday pay is calculated on basic pay alone, engineers notice, and the gap between a normal week and a holiday week can be large enough to cause disputes or claims.
This guide covers the basics for employees and workers. It is not a substitute for payroll software set up correctly or for advice on an unusual case, but it should help you check that your rules are on the right side of the law.
Holiday entitlement
Almost all workers are legally entitled to 5.6 weeks' paid holiday a year[1]. For an engineer working five days a week, that is 28 days, and you may include bank holidays in that total if the contract says so. Many firms give more as a retention benefit. Whatever you give, write down how the leave year runs, how far ahead leave must be requested, how many people can be off at once and whether there are busy periods when leave is restricted.
- Set the leave year and say it in the contract.
- Publish a simple request process with a response time.
- Limit how many engineers can be off at once rather than banning winter leave altogether.
- Make sure on-call weeks and holidays are planned together, so nobody is rostered while away.
- Track leave in the same system as the diary, so the scheduler sees it.
What goes into holiday pay
For the weeks paid at the normal rate, GOV.UK says normal pay includes commission and regular overtime payments, and payments related to length of service or professional qualifications; bonuses usually are not included[2]. Where pay varies, you take the average over the last 52 weeks. If there was no pay in a week, you count back another week, up to a maximum of 104 weeks[2].
For a heating engineer, regular overtime usually means the evenings and Saturdays that happen most weeks in winter. Standby payments for on-call weeks are paid in a regular pattern too. Treat both as part of normal pay unless you have advice to the contrary. Leaving them out is the commonest holiday pay mistake in trade firms.
Find the reference weeks
List the last 52 weeks in which the engineer was paid. Skip weeks with no pay and go further back, up to 104 weeks.
Add up the right pay
Include basic pay, regular overtime, commission and regular standby or call-out payments. Leave out genuine one-off bonuses and expense reimbursements.
Work out the weekly average
Divide the total by the number of weeks used.
Pay a day's holiday
Divide the weekly average by the number of days normally worked, for example five.
Record it
Keep the calculation, so you can show your working if it is ever questioned.
Example (fictional): an engineer earns a basic £700 a week, and over the last 52 paid weeks averaged £110 a week in regular overtime and £40 a week in standby pay. His average weekly pay for holiday is £850, so a day's holiday is £170, not the £140 his basic pay would give.
Irregular hours, part-year staff and rolled-up pay
Some people in trade firms work irregular hours: a casual labourer on busy weeks, a retired engineer who covers holidays, an administrator who works when needed. For leave years starting after 31 March 2024, their holiday entitlement is 12.07% of the hours they worked in a pay period, rounded up to the nearest hour if the fraction is half an hour or more[3]. GOV.UK's own example: 30 hours worked in a week earns 4 hours of leave[3].
Rolled-up holiday pay, where an amount for holiday is added to each payslip instead of being paid when leave is taken, is allowed for irregular-hours and part-year workers. For regular-hours workers, an employer cannot include an amount for holiday pay in the hourly rate[2]. So a full-time engineer on a day rate through payroll cannot have holiday rolled into that rate.
Starters, leavers and carrying leave over
New starters build up holiday from their first day, so an engineer who joins in October has a pro-rata share for the rest of the leave year. Leavers are paid for holiday they have built up but not taken in the final pay, and if they have taken more than they built up, you can only recover the excess if the contract allows it. Put both rules in the contract, with a worked line showing how the pro-rata figure is calculated.
Carry-over is where winter-heavy firms get stuck. If engineers cannot take leave during a long cold spell at the end of the leave year, decide in advance how much can be carried over and by when it must be used. A leave year that ends in March, straight after the busiest months, forces the problem every year. Many heating firms find a leave year starting in January or April easier to manage.
Statutory Sick Pay after April 2026
£123.25
Weekly Statutory Sick Pay for 2026 to 2027, or 80% of average weekly earnings if lower[4]
Since 6 April 2026, the Lower Earnings Limit and the waiting period have been removed from SSP[5]. An eligible employee is now entitled to SSP from the first day of sickness, and people on low earnings qualify at 80% of their average weekly earnings where that is lower than the flat rate[4]. For most full-time engineers, SSP is a small fraction of normal pay: the median full-time employee plumber earned £782.50 a week in April 2026[6].
Source: GOV.UK, 2026[4]
Show the data
| Item | Value |
|---|---|
| Statutory Sick Pay, 2026 to 2027 | £123.25 |
| Median gross weekly pay, full-time employee plumbers, 2026 | £782.5 |
That gap is why company sick pay matters for retention. An engineer who knows a week off will cost them most of their pay may come to work ill, which on a gas job is a safety issue as well as a welfare one.
Designing company sick pay
| Choice | Option A | Option B |
|---|---|---|
| Waiting before company pay starts | Paid from day one | Starts after probation |
| Amount | Full basic pay | Basic pay less SSP, topped up |
| Length | A set number of weeks a year | Grows with length of service |
| Evidence | Self-certify for up to 7 days | Fit note from day 8 |
| Overtime and standby | Not included | Average included |
Write the scheme down, say what happens if it is abused, and hold a short return-to-work conversation after every absence. The conversation is not a punishment. It is where you find out about a bad back from lifting cylinders or stress from the on-call rota before it becomes a long absence.
Sickness during holiday and long absences
An engineer who falls ill during booked holiday may be able to take the lost days later if they report the sickness under your normal rules. Long-term sickness also keeps building statutory holiday, and staff who could not take it because they were off sick can carry it over for a limited period. These are areas where payroll software often gets it wrong, so check the settings and take advice for long absences.
For anyone off for more than a few weeks, keep in touch on an agreed schedule, ask about adjustments that could help a return, such as lighter jobs, no on-call or no heavy lifting for a period, and keep notes of each conversation.
Checklist for your payroll and handbook
- Holiday pay calculation includes regular overtime, commission and regular standby pay.
- The 52-week reference period is applied, going back to 104 weeks where needed.
- Irregular-hours staff accrue leave at 12.07%[3] and rolled-up pay is used only for them.
- SSP is paid from the first qualifying day of sickness, with no Lower Earnings Limit.
- Company sick pay rules are written, fair and applied the same way to everyone.
- Holiday and sickness records are kept with the calculations used.
Frequently asked questions
Does holiday pay include overtime for engineers?
Yes, regular overtime is part of normal pay for holiday purposes, along with commission and some other regular payments. Genuine one-off bonuses usually are not.
Can I add holiday pay to an engineer's day rate?
Only for irregular-hours or part-year workers. For regular-hours workers, holiday pay cannot be included in the hourly rate.
Is SSP paid for one day off sick?
Since 6 April 2026 the waiting period has gone, so an eligible employee is entitled to SSP from the first day of sickness.
How is holiday calculated for casual workers?
For irregular-hours workers, leave accrues at 12.07% of the hours worked in each pay period.
References
GOV.UK (2026). Holiday entitlement (opens in a new tab) ↑
GOV.UK (2026). Holiday entitlement: holiday pay (opens in a new tab) ↑
GOV.UK (2026). Holiday entitlement: calculate leave entitlement (opens in a new tab) ↑
GOV.UK (2026). Rates and thresholds for employers 2026 to 2027 (opens in a new tab) ↑
GOV.UK (Department for Business and Trade) (2026). Plan to Make Work Pay and Employment Rights Act: timeline update (opens in a new tab) ↑
Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑