Technology AI

Remote boiler diagnostics and connected boilers

What remote boiler monitoring can and cannot tell an engineer, how it changes breakdown triage and servicing, and how to handle customer consent.

Ava research teamPublished 6 min read

On this page
  1. What a connected boiler is
  2. What remote diagnostics can tell you
  3. What it cannot do
  4. How it changes breakdowns and servicing
  5. Alerts and what each should trigger
  6. Controls, Boiler Plus and the sales conversation
  7. Consent, access and data
  8. Explaining monitoring to customers
  9. Adding monitoring to a service plan
  10. Worked example: a lockout on a Sunday
  11. Questions to ask the manufacturer
  12. Frequently asked questions
  13. References

Key takeaways

  • Remote monitoring shows fault codes, pressure and run history; it never replaces a physical service or safety check.
  • The biggest gain is triage: knowing the likely fault and part before the van leaves.
  • Connected controls are one of the routes to meeting Boiler Plus when fitting a combi in England.
  • Get the customer's agreement in the manufacturer's app and explain exactly what you can see.
  • Decide in advance who watches alerts, when, and what each alert triggers.

What a connected boiler is

A connected boiler sends data about its own operation to the manufacturer's online platform, usually through a gateway or a smart thermostat linked to the boiler's control board. The homeowner sees an app. With the customer's permission, the installer or service company sees a dashboard showing the boiler's status, fault codes, system pressure and how it has been running. Some platforms also let the engineer change settings remotely.

The market for this is large because so many homes run on gas boilers. Mains gas was the central heating type for 73.8% of households in England and Wales in 2021[1], and 63% of homes in England had a condensing combination boiler in 2024, up from 2% in 2001[2]. Most of those boilers can be connected with the right control, even if they were not sold that way.

Homes in England by boiler type, 2001 and 2024
Homes in England by boiler type, 2001 and 2024Column chart. Condensing combination boiler: 2001 2%, 2024 63%; Other condensing boiler: 2001 1%, 2024 19%.0%20%40%60%80%Condensing combination boiler · 2001: 2%2%Condensing combination boiler · 2024: 63%63%Condensing combination boilerOther condensing boiler · 2001: 1%1%Other condensing boiler · 2024: 19%19%Other condensing boilerHomes in England by boiler type, 2001 and 2024Column chart. Condensing combination boiler: 2001 2%, 2024 63%; Other condensing boiler: 2001 1%, 2024 19%.Condensing combination boilerCondensing combination boiler · 2001: 2%2%Condensing combination boiler · 2024: 63%63%Other condensing boilerOther condensing boiler · 2001: 1%1%Other condensing boiler · 2024: 19%19%
  • 2001
  • 2024

Source: Ministry of Housing, Communities and Local Government (GOV.UK), 2024[2]

Show the data
Item20012024
Condensing combination boiler2%63%
Other condensing boiler1%19%

What remote diagnostics can tell you

  • The current fault or lockout code, and the history of past codes.
  • System pressure, and whether it has been falling over days or weeks.
  • Ignition failures and flame loss events, which point to gas supply, condensate or ignition problems.
  • Flow and return temperatures, and how often the boiler cycles on and off.
  • Hours run and demand patterns, useful when a customer says the bills have gone up.
  • Whether the boiler is online at all, which separates a boiler fault from a power or wifi problem.

Exactly what is shown varies by manufacturer and model. Before you sell remote monitoring to customers, test each platform you will use on a boiler in your own office or a willing customer's home.

What it cannot do

Remote data is about how the boiler thinks it is running. It cannot see a flue that has come apart in a loft, a corroded case seal, a blocked air intake or carbon monoxide in the room. It is not a service, it is not a safety check and it does not replace a combustion test with an analyser. Be careful how you describe it to customers so nobody believes a monitored boiler no longer needs an annual visit.

Wording to use: “Monitoring lets us spot some faults early and come prepared, but it cannot check the flue, seals or combustion. Your boiler still needs its annual service.”

How it changes breakdowns and servicing

The clearest gain is triage. When a customer rings with no heating, the dashboard may already show a fault code that points to a specific part, low pressure the customer can top up themselves, or a boiler that is offline because the router was switched off. That changes three things: whether you need to visit at all, which engineer goes, and which part is in the van.

  • Fewer wasted visits for faults the customer can clear safely with guidance, such as low pressure on a sealed system they know how to refill.
  • Better first-visit fix rates because the likely part travels with the engineer.
  • Earlier warnings, such as slowly falling pressure, so a repair can be booked before a winter lockout.
  • Better-planned services, with known issues listed before the engineer arrives.

Demand is seasonal. Household gas demand in the first quarter of 2026 was more than five times the level in the third quarter of 2025[3], and alerts follow the same curve. Plan who watches the dashboard in January, not just in June.

Alerts and what each should trigger

Example alert rules for a firm offering remote monitoring
AlertLikely meaningResponse
Boiler offlinePower, router or gateway problemText or email the customer to check; no visit unless heating is also lost
Pressure falling over daysSmall leak, expansion vessel or relief valve issueCall the customer and book a repair visit
Repeated ignition failuresGas supply, condensate, ignition or flue issueCall the customer; urgent visit if heating is lost
Lockout codeBoiler has shut down to protect itselfCall the customer; triage by code; book or dispatch
Short cyclingSettings, oversized boiler or system issueNote for the next service; advise on settings

Write these rules down before you switch monitoring on. An alert that nobody acts on is worse than no alert, because the customer may believe someone is watching.

Controls, Boiler Plus and the sales conversation

Connected controls are also part of the rules for new boilers. Under the Boiler Plus standards for England, timers and room thermostats are an explicit requirement for gas and oil systems, and when a gas combination boiler is installed one extra energy efficiency measure is required; smart controls featuring automation and optimisation functions are one of the four permitted options[4]. Interest in connected home controls has been growing; in 2020, 18% of adults in Great Britain used internet-connected energy or lighting controls, rising to 26% of those aged 35 to 44[5].

Fitting a manufacturer's connected control at installation is often the simplest way to offer monitoring later. Explain both benefits plainly: the homeowner gets app control, and with their permission you can see faults and help faster.

  • Use the manufacturer's own process for the customer to grant your firm access; never use the customer's login.
  • Tell the customer what you can see, whether you can change settings and how to withdraw access.
  • Record the consent date in your job system.
  • Remove access when a customer leaves your service plan or moves house.
  • Limit dashboard access to named staff with their own logins.

Explaining monitoring to customers

Customers react well to monitoring when it is framed around them: fewer cold evenings, faster fixes and an engineer who arrives knowing what is wrong. They react badly when it sounds like surveillance or a way to sell more visits. Keep the explanation short and honest.

  • Say what you will watch for and what you will do when you see it.
  • Say when alerts are watched, for example working hours plus your on-call rota, and that monitoring is not an emergency service.
  • Explain that they can switch your access off in the app at any time.
  • Confirm that you will not use the data to sell them anything they have not asked about.
  • Put the same points in writing on the service plan terms.

If a customer declines, note it and move on. A boiler that is not connected still gets the same service visit.

Adding monitoring to a service plan

  1. Pick platforms

    Start with the one or two manufacturers you fit most.

  2. Define the offer

    What you monitor, the hours alerts are watched, and what the customer gets when an alert fires.

  3. Write alert rules

    As in the table above, with named responsibilities for working hours, evenings and weekends.

  4. Train the office

    How to read the dashboard, what to tell customers and when to escalate to an engineer.

  5. Trial with a small group

    Your own staff's homes and a handful of service plan customers, for one heating season.

  6. Review

    Count avoided visits, earlier repairs and first-visit fixes, and adjust the offer.

Worked example: a lockout on a Sunday

Example: a fictional firm monitors service plan boilers through the manufacturer's platform. On a Sunday morning a customer's boiler shows repeated ignition failures followed by a lockout. The on-call engineer checks the dashboard on his phone, sees the condensate-related code and the outside temperature below freezing, and rings the customer. He talks them through checking whether the external condensate pipe is frozen and arranges a visit for later in case it is not. The customer pours warm, not boiling, water over the frozen section as advised, the boiler restarts, and the firm books a visit in the week to insulate the pipe.

Questions to ask the manufacturer

  • Which models and controls connect, and does connection need a specific gateway?
  • What can installers see and change, and what needs the customer's approval each time?
  • How are alerts delivered: app, email, text?
  • How long is history kept, and can it be exported?
  • Is there a charge for the installer platform, and does that change?

For related tools, see thermal imaging cameras, flue gas analysers and digital job sheets.

Frequently asked questions

Can remote monitoring replace an annual boiler service?

No. Monitoring shows how the boiler reports its own operation. It cannot check the flue, seals or combustion, so the annual service is still needed.

Can I see a customer's boiler data without permission?

No. The customer grants your firm access through the manufacturer's process, and can withdraw it. Tell them what you can see and do.

Do all modern boilers connect?

Many do with the right manufacturer control or gateway, but it varies by model. Check the manufacturer's compatibility list before promising it.

Does Boiler Plus require smart controls?

Not on its own. When a gas combi boiler is installed in England, one extra efficiency measure is required, and smart controls with automation and optimisation are one of the four options.

References

  1. Office for National Statistics (2021). Housing, England and Wales: Census 2021 (opens in a new tab) ↑

  2. Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 2, energy efficiency (opens in a new tab) ↑

  3. Department for Energy Security and Net Zero (2026). Energy Trends: UK gas, ET 4.1 natural gas supply and consumption (quarterly), September 2026 (opens in a new tab) ↑

  4. Department for Business, Energy and Industrial Strategy (GOV.UK) (2018). Boiler Plus: New standards for domestic boiler installations from April 2018, frequently asked questions (opens in a new tab) ↑

  5. Office for National Statistics (2020). Internet access - households and individuals, Great Britain: 2020 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo