Key takeaways
- Start by finding out what kind of heating it is: most homes in England and Wales use mains gas, but millions do not[1][2].
- Ask for the boiler make and the exact fault code or light pattern; it is the single most useful fact before a visit.
- Walk the caller through safe checks only: thermostat, power, other gas appliances, meter credit and the pressure gauge.
- In freezing weather, suspect a frozen condensate pipe on condensing boilers, which now dominate the housing stock[3][4].
- Decide priority by who is at home and how cold it is, not by who rings most often.
Why triage saves visits
A no-heat call in January feels urgent to everyone, and the instinct is to book the first free slot and send someone. Some of those visits will find a thermostat with flat batteries, a prepayment meter out of credit or a condensate pipe that thaws by lunchtime. Each one costs an engineer an hour or more that a vulnerable customer across town needed. Five minutes of structured questions on the phone can resolve some calls outright, get the right parts into the van for others, and put the most urgent at the front of the queue.
Triage is not remote repair. The person answering should never coach a caller into opening a boiler casing or adjusting gas controls. The aim is to collect facts, guide a few safe checks that any householder can do, and decide what happens next.
First, what kind of heating is it?
Most callers will have a gas boiler, but you should not assume it. At the 2021 Census, mains gas was the central heating type for 73.8% of households in England and Wales, while 8.5% used electric central heating and another 8.5% had two or more types[1]. Around four million UK homes are not connected to the gas grid and rely on heating oil or LPG[2]. A no-heat call from an oil-fired home might be an empty tank, which no amount of boiler questioning will find.
Ask whether the boiler also heats the hot water directly or whether there is a hot water cylinder. Combination boilers are now the norm: 63% of homes in England had a condensing-combination boiler in 2024, up from 2% in 2001, and another 19% had a condensing boiler[3]. A combi with heating but no hot water points to different faults than a system boiler with a cylinder.
The triage question set
| Question | What the answer tells you | Likely next step |
|---|---|---|
| Is anyone at home elderly, unwell, disabled or a young baby? | Priority | Move up the queue; consider temporary heat |
| Is it no heating, no hot water, or both? | Narrows the fault area | Record exactly which |
| What make is the boiler, and roughly how old? | Parts and familiarity | Check parts in the van |
| Is there a fault code or flashing light? What exactly does it show? | Often the most useful single fact | Look up the code before the visit |
| Do other gas appliances, such as the hob, work? | Supply problem versus boiler problem | If none work, check the meter |
| Is it a prepayment meter, and does it have credit? | Supply cut by credit | Customer tops up or uses emergency credit |
| What does the pressure gauge on the boiler show? | Low pressure is common and simple | Follow the user guide or book a visit |
| Has it been below freezing overnight? | Frozen condensate pipe | Safe thawing advice or a visit |
| Has anyone worked on the system recently? | Recent work may be the cause | Ask who and when |
Safe checks to walk through with the caller
- Thermostat and programmer: is the heating calling? Turn the thermostat up a few degrees and check the programmer is set to on. Replace thermostat batteries if it has them.
- Power: is the boiler display lit? If not, check the fused switch next to the boiler and the fuse board for a tripped switch.
- Gas supply: do other gas appliances work? If none do, the problem may be the supply or meter rather than the boiler.
- Prepayment credit: if there is a prepayment meter, check the balance and whether emergency credit is available.
- Pressure: read the gauge. If the needle is outside the range marked on the gauge or in the user guide, note the reading.
- Reset once: if the manufacturer's guide allows a reset and there is no smell of gas, the caller may press reset once. If it locks out again, stop and book a visit.
If at any point the caller mentions a smell of gas, a carbon monoxide alarm or symptoms such as headaches and dizziness, stop the triage and switch to your gas emergency procedure immediately.
What not to ask a caller to do
- Remove the boiler casing or any panel that needs a tool.
- Adjust gas valves or the appliance's gas controls; only the emergency control handle at the meter is for householders, in an emergency.
- Repressurise the system unless the manufacturer's user guide explains how and the caller is comfortable doing it.
- Press reset repeatedly after a lockout.
- Pour boiling water onto plastic pipes or use any naked flame to thaw them.
Write these limits into the script so that whoever answers, including temporary cover, does not improvise. Gas work is legally restricted to registered engineers for good reason; your triage should never drift into it.
Build a fault-code sheet for the boilers you see
Fault codes are only useful if the person answering the phone knows what they mean. Most firms see the same handful of manufacturers again and again. Build a one-page sheet for each common make, listing the codes you meet most often, what they usually indicate, whether a caller can safely do anything about them, and which parts the engineer should bring. Engineers are the best source for this; ask them to add a line whenever a code catches them out.
- Group codes by action: caller can safely resolve, book a standard visit, or bring specific parts.
- Note any code that can indicate a safety issue, so the office never treats it as routine.
- Ask callers to read the code exactly, including letters and any flashing pattern, and to photograph the display.
- Review the sheet every autumn, before the busy season, and add newer models your engineers have started to see.
Keep the sheet where calls are taken, on paper or on screen. A caller who reads out a code and hears 'that usually means the pipe outside has frozen, let me talk you through it' trusts the firm immediately, and the engineer who does go out arrives with the right part.
Cold snaps and frozen condensate pipes
Condensing boilers drain condensate through a plastic pipe, often routed outside, which can freeze in prolonged cold. The boiler then locks out, typically with a specific code and sometimes a gurgling sound. Cold spells are also when the government's Cold Weather Payment scheme triggers: payments of £25 are made for each 7-day period when the average temperature is zero degrees or below, between 1 November 2026 and 31 March 2027[4]. Those are the weeks when frozen condensate calls cluster.
Where the manufacturer's guidance and your own policy allow it, a caller can thaw an accessible external condensate pipe with warm, not boiling, water or a hot water bottle, then reset the boiler once. If the pipe is high up, inside a wall or the caller is unsure, book a visit. Record the outcome either way, because the same homes tend to freeze every year and a permanent fix is often a better job than a repeat call-out.
Deciding priority
Safety
Any gas smell, CO alarm or symptoms: emergency procedure, not the queue.
Vulnerability and temperature
No heat with an elderly, ill or disabled person or a young baby at home, especially in freezing weather: top of the queue, and consider lending a temporary heater.
Total loss
No heating and no hot water for an ordinary household: same day where possible.
Partial loss
Heating works but hot water does not, or the reverse: next available slot.
Intermittent
Boiler works but locks out occasionally: planned visit with parts identified from the fault code.
Rented homes deserve a note. Only 85% of private rented homes in England had central heating in 2024, against 95% of owner-occupied and local authority homes[5], and tenants often wait for landlords to approve repairs. Capture the landlord or agent's details on the call so approval does not hold up the visit.
Example: three calls on a frosty morning
Example: a fictional firm takes three no-heat calls before 8am. Caller one has a combi showing a fault code the office recognises as a frozen condensate lockout; she thaws the outside pipe with a watering can of warm water, resets once and the heating comes on. Caller two lives alone, is in her eighties and has an oil boiler; the oil gauge shows the tank is nearly empty, so the office gives her the number of her usual supplier and books a visit anyway, because a run-dry can need the burner bled. Caller three has no display at all; a tripped switch on the fuse board is reset and the boiler starts. One visit booked from three calls, and the vulnerable customer is still checked on.
Whatever the outcome, write it on the job record: what the caller reported, which checks were done and what happened. If the same household rings again next week, the next person to answer can see that the condensate pipe froze last time and suggest a permanent fix, instead of starting from scratch.
Frequently asked questions
What should I ask a customer with no heating?
Who is at home and whether anyone is vulnerable, whether it is heating, hot water or both, the boiler make and any fault code, whether other gas appliances work, meter credit, the pressure reading and whether it has been freezing.
Should we tell customers to reset their boiler?
Only once, only if the manufacturer's guide allows it and only if there is no smell of gas. If it locks out again, book a visit rather than resetting repeatedly.
How do we prioritise no-heat calls in a cold snap?
Safety first, then vulnerability and temperature, then total loss of heat and hot water, then partial loss. Record the reasons so decisions are consistent and fair.
References
Office for National Statistics (2021). Housing, England and Wales: Census 2021 (opens in a new tab) ↑
Heating and Hotwater Industry Council (HHIC) (2026). HHIC and OFTEC urge Government to back hybrid heating systems to support off-grid households (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 2, energy efficiency (opens in a new tab) ↑
GOV.UK (2026). Cold Weather Payment (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 2, energy efficiency (opens in a new tab) ↑