Tax finance admin

Zero VAT on energy-saving installs: what qualifies

Which energy-saving installs are zero-rated until 31 March 2027, from heat pumps and controls to insulation and batteries, and why gas boilers are not.

Ava research teamPublished 6 min read

On this page
  1. The relief in one paragraph
  2. Key dates
  3. What qualifies
  4. What does not qualify
  5. Why the relief matters to customers
  6. Quoting and invoicing correctly
  7. Mistakes that lead to VAT bills later
  8. Planning for 1 April 2027
  9. Example: an air source heat pump quote
  10. Frequently asked questions
  11. References

Key takeaways

  • Installing specified energy-saving materials is zero-rated from 1 May 2023 to 31 March 2027, then reverts to the reduced rate of 5%[1].
  • Air and ground source heat pumps, central heating and hot water controls, insulation and solar panels qualify; water source heat pumps and batteries were added from 1 February 2024[1].
  • Energy-efficient boilers, including gas boilers, are standard-rated unless a grant-funded relief applies[1].
  • Split qualifying and non-qualifying work on quotes, and plan now for jobs that complete around 1 April 2027.

The relief in one paragraph

VAT Notice 708/6 sets out a time-limited zero rate for installing certain energy-saving materials. It applies from 1 May 2023 to 31 March 2027, and from 1 April 2027 the same installations revert to the reduced rate of 5%[1]. Most goods and services carry the standard rate of 20%, with the reduced rate of 5% applying to some, including home energy[2]. For a VAT-registered heating firm, the relief can take a fifth off the price a homeowner pays for qualifying work.

The relief covers the installation of the materials, not just the materials themselves. Selling a heat pump or a box of controls without fitting them is not covered, so a supply-only sale to a DIY customer is taxed in the normal way.

Key dates

Timeline of the energy-saving materials relief[1].
DateWhat changedSource
1 May 2023Zero rate starts for installing specified energy-saving materialsNotice 708/6, sections 1.1 and 2.1
1 February 2024Water source heat pumps, batteries and smart diverters added; groundworks for ground source heat pumps coveredNotice 708/6, sections 2.7 and 2.14
31 March 2027Last day of the zero rateNotice 708/6, section 2.1
1 April 2027Installations revert to the reduced rate of 5%Notice 708/6, section 2.1

What qualifies

Section 2.7 of the notice lists the qualifying materials[1]. For plumbing and heating firms, the relevant ones are:

  • Air source heat pumps, as long as they are permanently fixed; portable or moveable units do not qualify[1].
  • Ground source heat pumps, with related groundworks covered from 1 February 2024[1].
  • Water source heat pumps, from 1 February 2024[1].
  • Controls for central heating and hot water systems.
  • Insulation and draught stripping, which some heating firms install alongside heat pumps.
  • Solar panels, micro combined heat and power units and wood-fuelled boilers.
  • Batteries for storing energy converted from electricity, and smart diverters, from 1 February 2024[1].

Controls are the most overlooked item. Fitting a new programmer, room thermostat, smart controls or thermostatic radiator valves as a separate job can be a qualifying installation in its own right.

What does not qualify

  • Energy-efficient boilers, including condensing gas boilers, are standard-rated. The notice points to section 3 for grant-funded installations, where some grant-funded gas-fired boilers can be reduced-rated[1].
  • Multi-fuel or dual-fuel boilers that burn non-renewable fuels such as coal or oil are standard-rated[1].
  • Portable or moveable air source units[1].
  • Materials sold without installation.
  • Other work that is not an energy-saving material in its own right, such as general plumbing or decorating. Check the notice for when associated work forms part of the qualifying installation and when it must be treated separately.

The gas boiler exclusion matters for quoting. A combi swap with new controls is a mix: the boiler and its fitting are standard-rated, while the controls installation may qualify. Show them as separate lines so the customer can see why.

Why the relief matters to customers

Heat pump demand is rising and each job is a large purchase. By the end of September 2026 there had been 160,874 Boiler Upgrade Scheme voucher applications, 98% of them for air-to-water heat pumps[3]. 131,619 vouchers had been issued[4] and 96,611 installations paid out[5].

Boiler Upgrade Scheme progress to September 2026England and Wales, cumulative since the scheme began
Boiler Upgrade Scheme progress to September 2026Column chart. Voucher applications: 160,874; Vouchers issued: 131,619; Installations paid: 96,611.050,000100,000150,000200,000Voucher applications: 160,874160,874Voucher applicationsVouchers issued: 131,619131,619Vouchers issuedInstallations paid: 96,61196,611Installations paidBoiler Upgrade Scheme progress to September 2026Column chart. Voucher applications: 160,874; Vouchers issued: 131,619; Installations paid: 96,611.050,000100,000150,000200,000Voucher applications: 160,874160,874Voucherapplicati-onsVouchers issued: 131,619131,619VouchersissuedInstallations paid: 96,61196,611Installat-ions paid

Source: Department for Energy Security and Net Zero, 2026[3]

Show the data
ItemValue
Voucher applications160,874
Vouchers issued131,619
Installations paid96,611

The median installed cost of an air-to-water heat pump under the scheme was £12,826 in July to September 2026[6], before the £7,500 grant[7]. No grant is available for hybrid systems that combine a gas boiler with a heat pump[8]. On a job of that size, whether VAT is charged at 0%, 5% or 20% makes a large difference to what the customer pays, so get it right on the quote.

Quoting and invoicing correctly

  1. Confirm the property type

    The relief is aimed at residential accommodation, and from 1 February 2024 some buildings used solely for relevant charitable purposes. Check the notice if the job is anything else.

  2. List each item separately

    Heat pump, controls, cylinder, radiators, pipework, electrical work and making good. Decide which lines are qualifying installation and which are not.

  3. Apply the right rate to each line

    Zero-rate qualifying installation until 31 March 2027 and the standard rate on other lines. Do not zero-rate a whole job because one part qualifies.

  4. Show VAT clearly

    State the rate and VAT amount on each line or group, and the total, so the customer and any grant administrator can follow it.

  5. Keep evidence

    Product data sheets and the job description show why each item qualified. Keep them with the invoice.

Mistakes that lead to VAT bills later

  • Zero-rating a whole boiler replacement because new controls were fitted at the same time. Only the qualifying part can be zero-rated.
  • Zero-rating a supply-only sale of a heat pump or controls to a customer who fits them, or has someone else fit them.
  • Applying the relief to a portable air conditioning or air-to-air unit that is not permanently fixed.
  • Treating every item on a heat pump job the same way without checking how the notice treats associated work such as radiators and cylinders.
  • Forgetting that the zero rate ends on 31 March 2027, and sending quotes in early 2027 that promise it for work finishing later.
  • Keeping no evidence of why an item qualified, which makes it hard to answer an HMRC query years later.

If HMRC decides the zero rate was applied wrongly, the VAT is usually due from you, not the customer, because the price has already been agreed and paid. That can wipe out the profit on a job. When in doubt, check the notice section by section, and ask your accountant before quoting an unusual installation.

Keep a short internal note for your estimators listing which products and job types you treat as qualifying and which you do not, with the notice section that supports each decision. It keeps quotes consistent across the team.

Planning for 1 April 2027

From 1 April 2027, qualifying installations revert to 5%[1]. Jobs that are quoted in early 2027 and completed in spring will straddle the change. The rate that applies depends on the tax point, which for most installation work is generally linked to when the work is completed or when payment is received, whichever comes first. Ask your accountant how this applies to your deposits and stage payments before you send quotes that run past the date.

  • Put a line in quotes that run past 31 March 2027 explaining that VAT will be charged at the rate in force at the tax point.
  • Avoid promising the zero rate[1] on work you may not finish in time.
  • Watch for a rush of bookings in early 2027 and plan your diary and stock accordingly.
  • Check whether the government announces any extension; until it does, plan on the published end date.

Example: an air source heat pump quote

Example. A VAT-registered heating firm quotes to replace an oil boiler with an air source heat pump in a detached house. The quote lists the heat pump supplied and fitted, new controls, a new cylinder, five larger radiators, pipework alterations, electrical work and making good.

The firm zero-rates the heat pump installation and the controls, having checked the notice for how the cylinder, radiators and pipework should be treated as part of the installation, and applies the standard rate to the making good, which is separate decorating work. The quote states that the zero rate applies to installations with a tax point on or before 31 March 2027. The customer applies for the Boiler Upgrade Scheme grant, and the firm's line-by-line quote makes the grant paperwork straightforward.

VAT relief interacts with your other VAT choices. On the Flat Rate Scheme, zero-rated sales can still count in turnover, so check the effect. The domestic reverse charge does not apply to zero-rated services. New-build work has its own rules, covered in VAT on new builds and conversions, and our guide to CIS registration for plumbers covers the subcontract side.

Frequently asked questions

Is there VAT on a heat pump installation?

Installing a permanently fixed air source, ground source or water source heat pump in residential accommodation is zero-rated until 31 March 2027. From 1 April 2027 it reverts to the reduced rate of 5%.

Is a new gas boiler zero-rated?

No. Energy-efficient boilers, including gas boilers, are standard-rated, unless a grant-funded relief in section 3 of Notice 708/6 applies.

Are heating controls zero-rated?

Installing controls for central heating and hot water systems is on the list of qualifying energy-saving materials, so the installation can be zero-rated until 31 March 2027.

Does the zero rate apply if I just sell the materials?

No. The relief applies to the installation of energy-saving materials. Selling them without fitting them is taxed in the normal way.

References

  1. HM Revenue and Customs (GOV.UK) (2024). VAT on energy-saving materials and heating equipment (VAT Notice 708/6) (opens in a new tab) ↑

  2. GOV.UK (2026). VAT rates (opens in a new tab) ↑

  3. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

  4. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

  5. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

  6. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

  7. GOV.UK (2026). Apply for the Boiler Upgrade Scheme: what you can get (opens in a new tab) ↑

  8. GOV.UK (2026). Apply for the Boiler Upgrade Scheme: what you can get (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo