Key takeaways
- The reverse charge applies to standard and reduced rate construction services reported within CIS, where the customer is VAT-registered[1][2].
- The customer, not you, accounts for the VAT to HMRC. Your invoice must say so, for example 'Customer to pay the VAT to HMRC'[2].
- It does not apply if the customer gives written confirmation that they are an end user or intermediary supplier[2], or if they are not VAT-registered.
- If the reverse charge part of a mixed supply is 5% or less of the total, it can be disregarded, but this must be agreed at the start of the contract[2].
What the reverse charge is
Normally, a VAT-registered plumber charges VAT on an invoice, collects it from the customer and pays it to HMRC. Under the domestic reverse charge for building and construction services, the customer accounts for the VAT instead. You still show the VAT rate and amount on the invoice, but the customer pays you the net amount and declares the VAT on their own return. HMRC introduced it to stop fraud where subcontractors collected VAT and disappeared without paying it over. Its start date was moved from 1 October 2020 to 1 March 2021[1].
For plumbing and heating firms, it matters because so much subcontract work sits inside the Construction Industry Scheme. CIS covers installing systems for heating, lighting, power, water and ventilation[3], so a plumber working for a builder or main contractor is very likely to meet the reverse charge.
Does it apply? Work through the tests
Are you VAT-registered?
If you are not registered, you do not charge VAT at all, and the reverse charge does not arise. Registration is compulsory once taxable turnover passes £90,000 in a rolling 12 months[4].
Is your customer VAT-registered in the UK?
The reverse charge cannot apply where the customer is not VAT-registered[2]. Householders and most small landlords are outside it.
Is the service within CIS?
The services must be within the scope of the Construction Industry Scheme[2]. Most plumbing and heating installation, alteration and repair for contractors is.
Is it standard or reduced rated?
The charge applies to standard and reduced rate services[1]. Zero-rated work, such as qualifying new-build work, is outside it.
Has the customer said they are an end user or intermediary?
If the customer has given written confirmation that they are an end user or intermediary supplier, you charge VAT in the normal way[2].
If every answer points to the reverse charge
Invoice under the reverse charge with the correct wording, and keep evidence of the checks you made.
Common plumbing situations
| Situation | Reverse charge? | Why |
|---|---|---|
| You subcontract a bathroom install for a VAT and CIS-registered builder working for a homeowner | Yes | Customer is VAT-registered, service is within CIS, builder makes an onward supply |
| You replace a boiler directly for a homeowner | No | Customer is not VAT-registered |
| You fit heating for a developer on zero-rated new-build work | No | Zero-rated services are outside the charge |
| A VAT and CIS-registered company gives you written end user notification for work on its own premises | No | End users who notify in writing are charged VAT normally |
| You supply materials only, with no installation | No | A supply of goods alone is not a construction service |
| A mixed contract where reverse charge services are 5% or less of the value | Can be disregarded | Must be agreed at the start of the contract |
End users and intermediaries
End users are businesses that receive building and construction services but do not make onward supplies of them[2], such as a VAT-registered property company having its own offices refitted. Intermediary suppliers are VAT and CIS-registered businesses connected or linked to an end user[2], for example a company in the same group that buys in construction services on the end user's behalf.
The important point for a subcontractor is the paperwork. The customer must tell you in writing that they are an end user or intermediary[2]. If they do, you charge VAT normally. If the written notification is not made correctly, the customer is liable for the VAT[2], but you still want the notice on file before you invoice so there is no argument later.
Ask at quote stage, not at invoice stage: 'Are you VAT and CIS registered, and are you the end user of this work or will you be supplying it on to someone else?' Get the answer in writing with the purchase order.
The 5% disregard
Some contracts mix reverse charge services with other supplies. HMRC allows you to disregard the reverse charge where the reverse charge part is 5% or less of the whole supply value[2]. The concession must be agreed at the start of the contract and is not worked out invoice by invoice[2]. If you rely on it, record the agreement and how you estimated the 5%.
Invoice wording that meets the rules
Your invoice needs to make clear that the reverse charge applies and that the customer must account for the VAT. HMRC lists wording that meets the legal requirement, including 'Customer to pay the VAT to HMRC' and 'VAT Act 1994 Section 55A applies'[2]. If your software cannot show the reverse charge VAT, HMRC's guidance suggests adding 'customer to account to HMRC'[2].
- Show the net value of the services and the VAT rate that applies.
- Show the amount of VAT the customer must account for, without adding it to the total you are asking them to pay.
- Add the reverse charge wording near the total.
- Keep your normal invoice details: your VAT number, the customer's details, date and invoice number.
- If materials or other supplies are on the same invoice, make clear which lines are under the reverse charge.
The cash-flow effect
Under the reverse charge, you no longer receive VAT on those invoices, but you still pay VAT on your materials, tools and van. A plumber who works mainly for contractors can move into a regular VAT repayment position. Contractors also deduct CIS tax from your labour at 20% if you are registered and 30% if you are not[5], so the money arriving in your account can be well below the invoice figure.
Source: GOV.UK, 2026[5]
Show the data
| Item | Value |
|---|---|
| Registered and verified | 20% |
| Not registered or cannot be verified | 30% |
Late payment makes it worse: 45% of construction SME employers named late payment as a major obstacle in 2025[6]. If you are regularly due VAT back, consider monthly VAT returns so repayments arrive sooner, and make sure your software is set up for reverse charge sales, which are reported differently from normal sales on your VAT return.
When your firm is the customer
Many plumbing firms are contractors as well as subcontractors. If you are VAT and CIS-registered and you bring in another VAT-registered firm, such as an electrician to wire a boiler or a plasterer to make good after a refit, and you then supply the finished job to your own customer, you are the one receiving reverse charge invoices.
- Check that each subcontractor's invoice shows the reverse charge wording and the VAT you must account for.
- Account for that VAT on your own VAT return as output tax, and reclaim it as input tax in the normal way if you are entitled to.
- Verify subcontractors under CIS before paying them, and deduct CIS from the labour element as required.
- If you are working for a homeowner, you are not an end user, because you are supplying the work on. Do not give end user notification in that situation.
- If you are having work done on your own premises, such as a new yard or office, you may be an end user. Decide, and tell the subcontractor in writing.
Set up your accounting software for both directions: reverse charge sales you make and reverse charge purchases you receive. Getting this wrong creates errors on both sides of your VAT return, which are tedious to correct later.
Example: a subcontract bathroom
Example. A VAT-registered plumbing firm fits a bathroom for a local builder, who is VAT and CIS-registered and is refurbishing a house for a homeowner. The labour and materials total £4,000 net. The builder has not given end user notification, because it is supplying the work on to the homeowner.
In this example, the plumber invoices £4,000, shows VAT at the standard rate as the amount the customer must account for, and adds 'Customer to pay the VAT to HMRC'. The builder deducts CIS from the labour element and pays the rest. The plumber reports the sale as a reverse charge sale on its VAT return and claims back VAT on the materials as usual. The builder accounts for the VAT on its own return. Had the builder given written end user notification, the plumber would have charged VAT normally.
Related VAT guides
The reverse charge interacts with other VAT choices. If you use the Flat Rate Scheme, take advice on how reverse charge sales affect it. For zero-rated work, see zero VAT on energy-saving installs and VAT on new builds and conversions. For the basics of registering, read VAT registration for plumbers, and for how VAT should appear on customer quotes, see VAT on quotes.
Frequently asked questions
Does the reverse charge apply to work for homeowners?
No. The customer must be VAT-registered and the service must be within CIS. Householders are not, so you charge VAT in the normal way if you are registered.
What wording should a reverse charge invoice include?
HMRC accepts wording such as 'Customer to pay the VAT to HMRC' or 'VAT Act 1994 Section 55A applies'. Show the VAT rate and the VAT the customer must account for, without adding it to the amount due.
What is an end user for the reverse charge?
A VAT and CIS-registered business that receives construction services but does not supply them on. If it tells you in writing that it is an end user, you charge VAT normally.
Does the reverse charge apply to zero-rated work?
No. It applies to standard and reduced rate services. Zero-rated construction services are outside it.
References
GOV.UK (2021). VAT domestic reverse charge for building and construction services (opens in a new tab) ↑
HM Revenue and Customs (GOV.UK) (2026). VAT reverse charge technical guide (opens in a new tab) ↑
GOV.UK (2026). What is the Construction Industry Scheme (opens in a new tab) ↑
GOV.UK (2026). When to register for VAT (opens in a new tab) ↑
GOV.UK (2026). What you must do as a CIS subcontractor: get paid (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑