Key takeaways
- Leak detection sells evidence and speed, not plumbing: the product is a located leak and a report someone else can act on.
- Claim delay complaints about buildings insurance were upheld by the Ombudsman more often than buildings complaints overall[1].
- Start with methods that fit your existing work (pressure testing, thermal imaging, moisture mapping) before buying specialist kit.
- Insurer and loss adjuster work is won on response times, report quality and clean invoicing, so set those up before you chase panels.
What you are really selling
Most plumbing firms already find leaks; few sell finding them as a service. The difference is the output. A leak detection job ends with a marked location, a cause where it can be established, photos or images that prove it, and a report that a customer, insurer or builder can act on without you. The repair may or may not follow, and sometimes someone else does it.
That makes it a natural add-on for firms already taking emergency calls. Escape of water and damp complaints are common: 5% of dwellings in England, about 1.4 million homes, had a damp problem in 2024[2], and hidden leaks behind walls or under floors are among the causes customers ask plumbers to rule in or out.
Insurance claimants care about speed. The Financial Ombudsman Service upheld 41% of buildings insurance complaints in 2023/24, but 57% of buildings complaints about claim delays[1]. A fast, well-evidenced location takes days out of a claim, which is the value an insurer or loss adjuster is paying for.
Source: Financial Ombudsman Service, 2024[1]
Show the data
| Item | Value |
|---|---|
| All buildings insurance complaints | 41% |
| Claim delay complaints | 57% |
Is it worth adding? Decision criteria
| Question | Good sign | Warning sign |
|---|---|---|
| Do you already get leak calls you cannot pin down? | Several a month end in "we'll come back" | Rare, mostly visible leaks |
| Do you have an engineer who enjoys diagnosis? | One person keen to own it | Everyone prefers fitting work |
| Can you produce a written report the same day? | Office support or a report template in your job software | Reports written at weekends, if at all |
| Do you have landlord, agent or insurer contacts? | Existing accounts that ask for reports | Only one-off domestic customers |
| Can you carry the kit cost through a slow start? | Kit bought from reserves or planned finance | Relying on the first month's surveys to pay for it |
Size matters less than focus. About 95% of UK plumbing and heating enterprises were micro businesses with fewer than ten employees in 2026[3], and many successful detection services run from one van and one specialist. Most firms sit in a modest turnover band too: 19,630 enterprises, about 41%, turned over between £100,000 and £249,000[4]. For a firm that size, a service that adds higher-value diagnostic days without more fitting hours can be meaningful.
The kit ladder, by method
Buy in the order your calls demand. Each step up adds capability but also training time and a new way to get it wrong.
| Method | Finds | Limits |
|---|---|---|
| Pressure decay testing | Whether a system or section is losing water or heating fluid | Confirms a leak exists, not where it is |
| Moisture meters and mapping | Extent of wetting in walls and floors | Shows damage spread, can mislead on source |
| Thermal imaging | Hot water and heating leaks, buried pipe routes | Needs temperature difference; weak on cold mains |
| Acoustic listening and ground microphones | Pressurised leaks under floors and outside | Noisy sites, low pressure and plastic pipe reduce accuracy |
| Tracer gas | Small leaks on buried or cold pipes | Training, gas handling and ventilation controls needed |
| Endoscope and drain camera | Leaks in voids, waste pipes and drains | Access holes required; drains are a separate skill |
Two habits separate reliable detection from expensive guessing. First, always confirm a loss before you look for it: a pressure decay test or meter check takes minutes and stops you hunting for a leak that is really condensation or a historic stain. Second, use at least two methods that agree before you mark a location for opening up. A thermal image that lines up with an acoustic peak, or a moisture map that narrows to the same joist bay as a pressure drop on one circuit, gives you the confidence to tell a customer where to cut.
What a good detection report looks like
The report is the product, so design it before you buy the kit. A good one is short and visual. It opens with the address, date, who was present and why the survey was requested. It then lists the methods used in the order you used them, with the reading or image that each produced, and finishes with a clear location marked on a photo or sketch.
Be honest about confidence. If two methods agree, say so. If the leak is only narrowed to an area, say how large and what further step would pin it down. State plainly what was opened up, what was left as found and what you recommend next, whether that is a repair you can quote, another trade or a drying company. Insurers and loss adjusters notice firms whose reports never overclaim.
Training and competence
- Train on manufacturer courses for each instrument, then practise on known leaks in your own premises before charging anyone.
- Write a short method statement per technique: when to use it, set-up steps, what a positive result looks like and when to stop and escalate.
- Keep a log of every survey with the predicted and actual leak location. It shows your accuracy and is persuasive evidence for account customers.
- Agree where your service ends. Many firms do not offer drains, roofs or structural moisture surveys and say so in writing.
Finding people is the hard part. 45% of construction SME employers saw recruitment and skills as an obstacle to business success in 2025[5]. Growing an existing engineer into the role is usually quicker than hiring a detection specialist.
How insurers and loss adjusters buy the work
There are three routes in. The customer can commission you directly and claim the cost back, which is how most firms start. Loss adjusters and claims management firms often keep lists of contractors they trust for particular areas. Larger insurers usually buy through networks or panels with agreed response times, report formats and rates.
Build a track record with direct customers
Do a run of domestic surveys, keep every report and your accuracy log, and ask customers whether their insurer accepted the findings.
Standardise the report
Use the same headings each time: attendance, methods used, location found, cause where known, access needed, photos and images, recommendations.
Approach local adjusters and agents
Send a two-page introduction with a sample redacted report, coverage area and how fast you can attend. Ask what they need from contractors, not just for work.
Meet the paperwork bar
Expect requests for insurance certificates, method statements, data handling arrangements and invoice formats before you get a first instruction.
Protect cash flow
Agree payment terms in writing for account work. 45% of construction SME employers named late payment as a major obstacle in 2025[5], so do not let one slow payer carry your whole detection service.
Scope and fees without surprises
Customers who ring about a hidden leak want to know what they will pay before they know what is wrong. Set out the scope of a survey in writing: which methods are included, how long you will spend on site, and what happens if the leak is not found within that time. Most firms charge a fixed survey fee for a defined visit and quote separately for any repair or making good, which keeps the customer's insurer able to see each element.
Decide in advance what you do if the survey points to another trade, such as a roofer or a drainage firm. Referring the customer on with your report attached is better than stretching your scope, and it builds goodwill with those trades, who often see leaks they cannot locate themselves.
Example: a three-engineer firm adds detection
Example: a firm with three engineers in the East Midlands notices that about two calls a week end with "we can't find it". It trains one engineer on thermal imaging and pressure testing, writes a report template and offers surveys at a fixed fee to its existing landlord and letting agent accounts.
Example, continued: after six months the engineer averages three surveys a week, about half of which lead to repair work for the same firm. Two local loss adjusters now send occasional instructions after seeing sample reports. The firm buys a ground microphone only when it has logged enough missed buried leaks to justify it.
Telling people the service exists
Detection work rarely comes from a general advert. It comes from people who meet unexplained leaks every week: letting agents, block managers, housing officers, kitchen and bathroom fitters, damp surveyors and roofers. Give each of them a single page that says what you find, how fast you can attend, what the report contains and how to instruct you. On your own website, write a plain page about hidden leaks with photos of real (anonymised) findings rather than stock images, and make sure your call handlers know to offer a survey when a caller says they cannot see where the water is coming from.
Risks to plan for
- A wrong location means opening up the wrong wall. Agree in writing that access is at the customer's request and record your confidence level.
- Detection reports can become evidence in disputes between owners, tenants and neighbours. Keep them factual and dated.
- Do not let the detection engineer drift back into routine fitting work in winter, or the service disappears just when demand peaks.
Frequently asked questions
What is trace and access?
Finding a hidden leak and opening up the building to reach it, then making good afterwards. Many home insurance policies treat it separately from repairing the pipe itself.
Which leak detection method should a plumbing firm start with?
Pressure testing, moisture mapping and thermal imaging cover a large share of domestic heating and hot water leaks. Add acoustic or tracer gas methods when your call log shows demand.
How do plumbers get work from loss adjusters?
Usually by building a record of accurate reports with direct customers, then sending sample reports to local adjusters and meeting their paperwork, insurance and invoicing requirements.
Does a leak detection survey always include the repair?
No. The survey locates the leak and reports on it. The repair may be quoted separately or done by another contractor.
References
Financial Ombudsman Service (2024). Buildings insurance complaints hit a 10-year high (opens in a new tab) ↑
Ministry of Housing, Communities and Local Government (GOV.UK) (2024). English Housing Survey 2024 to 2025: Chapter 1, housing quality (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and turnover size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Department for Business and Trade (GOV.UK) (2025). Longitudinal Small Business Survey 2025: SME employers (businesses with 1 to 249 employees) (opens in a new tab) ↑