Key takeaways
- Summer household gas use is about a fifth of the winter peak[1], so breakdown work falls away every year; plan for it rather than hope.
- Move annual services and landlord gas checks into summer slots; once moved, they stay there.
- Summer is install season: Boiler Upgrade Scheme grants of £7,500 for air and ground source heat pumps[2] give customers a reason to act before winter.
- Use bathrooms, small works and planned maintenance to keep engineers busy without filling the autumn diary.
- Put the slack to work: training, van refits, systems and staff holidays.
The summer dip is predictable
Every heating firm knows the feeling of a quiet July. The phone that rang every few minutes in January now rings a few times a day. National figures show why: UK household gas demand was 19,636 GWh in July to September 2025, against 109,126 GWh in January to March 2026[1]. With the heating off, boilers rarely fail, and when they do, customers are willing to wait.
The dip is not a problem in itself. It becomes one when it arrives without a plan, and the firm spends August chasing small jobs while the work that should have been moved out of winter stays there. The firms with the steadiest year treat summer as a season with its own work, booked in spring.
Decide what summer is for
Write down, in March or April, what the summer diary will hold. A typical plan for a domestic heating firm has five parts.
- Annual services and landlord gas safety checks moved out of the autumn rush.
- Boiler replacements and heat pump installs, which customers can live without heating for.
- Bathrooms, kitchens and other refurbishment plumbing.
- Planned maintenance for commercial customers, schools and landlords with empty periods.
- Business work: training, van and tool maintenance, systems and staff leave.
Give each a target number of engineer-days for June to August. It stops the summer filling up with whatever rings first.
Move services and safety checks into summer
The biggest long-term gain is moving planned work out of October and November. Every service done in July is one fewer competing with breakdowns in the first cold week, and once moved it tends to stay in the same month each year.
Landlord gas safety checks are a good place to start. Landlords must have each gas appliance and flue checked at intervals of no more than 12 months[3], so a check brought forward to the summer simply resets the cycle. Approach landlords and agents with a schedule: all their properties in your area checked over two or three summer weeks, with one report.
For domestic customers, offer a summer service with a clear reason: the engineer has time, the boiler will be ready for winter, and any parts can be ordered without a cold-weather wait. Send the message only to customers who have agreed to hear from you or who fall within the soft opt-in for existing customers[4].
Example message: Your boiler service is due in October. Would you like to bring it forward to July or August? We have more appointments available, and if anything needs replacing we can order it without the winter wait. Reply with a day that suits.
Installs: the work summer is made for
Customers will accept a day or two without heating in June that they would never accept in January. That makes summer the natural season for boiler replacements and heat pump installs.
For heat pumps, the Boiler Upgrade Scheme in England and Wales offers £7,500 towards an air source or ground source heat pump[2], £5,000 towards a biomass boiler and £2,500 towards an air-to-air heat pump[5]. Homes heated by oil or LPG with no mains gas connection can get an extra £1,500 towards an air or ground source heat pump until March 2027[6]. Demand is rising: September 2026 had 9,738 applications, 30% more than August and the highest monthly total since the scheme began[7].
That autumn rise means the summer is when to survey, quote and book. A customer surveyed in June can be installed in August; one surveyed in October may be waiting into the winter. For boilers, older systems that limped through the last winter are the best leads, and your job records will show which they are.
Bathrooms and small works
Refurbishment plumbing smooths the summer without tying up the autumn. Bathrooms, cloakrooms, kitchen moves and outdoor taps are multi-day or half-day jobs that suit engineers with spare capacity. Plan them to finish by the end of September, so no engineer is stuck on a refit when the first cold spell hits.
Small works lists are useful too. Ask service customers if there is anything else they have been meaning to get done: a dripping tap, a radiator to move, an outside tap, a water softener. A short list on the service report generates more summer work than most advertising.
Commercial and planned maintenance
Schools, offices that empty in August and holiday businesses between seasons all have plant that can only be worked on when the building is quiet. Contact them in spring with a proposal for summer maintenance: boiler room servicing, valve replacements, water system work and anything that needs the heating off. These jobs are often larger, booked well in advance and paid on account terms, which helps the cash position after a heavy January.
A summer marketing calendar
| When | Message | Who to | Channel |
|---|---|---|---|
| April | Bring your service forward to summer | Customers due September to December | Email or letter, with consent |
| May | Summer schedule for your portfolio | Landlords and agents | Email and phone |
| May to June | Replace before winter; heat pump grant explained | Customers with older boilers | Email, website, social media |
| June | Summer maintenance window | Schools, offices, holiday businesses | Email and phone |
| July | Small jobs list | Service customers | On the service report |
| August | Last summer install dates | Open quotes | Phone follow-up |
Keep the messages factual and useful. Customers respond to a clear reason to act now, not to a discount.
Use the slack well
- Book training and renewals: gas reassessments, unvented hot water, heat pumps, water regulations.
- Refit and restock vans, service tools and calibrate analysers.
- Clean up the customer database: appliance details, service due dates and consent records.
- Review prices, terms and the website before the busy season.
- Plan staff holidays in July and August so October is fully staffed.
These tasks are easy to skip when the diary is full and expensive to neglect. Scheduling them in summer turns quiet days into preparation for winter.
Keep emergency cover even when it is quiet
Summer breakdowns are fewer, but they still happen: a combi that stops producing hot water, a leak under a kitchen floor, a cylinder that fails. Customers with no hot water in July are just as keen to see someone quickly, and how you treat them in summer is what they remember when they need you in winter. Keep one engineer's diary flexible each day, even if that means a little less install work.
It is also when on-call engineers can take proper time off. Run a lighter out-of-hours rota in summer, with clear rules about what justifies a night visit, and make sure the people who carried the winter get their leave.
Pricing the quiet season without discounting
It is tempting to cut prices to fill summer days. Most firms find it does more harm than good: customers who book a cheap summer service expect the same rate next year, and discounting trains customers to wait. A better lever is convenience and certainty. Offer a wider choice of appointment times, a guaranteed date for installs and a written quote within two days of survey. These cost little in summer and are worth a great deal to customers. If you do run an offer, tie it to a specific benefit, such as a system clean with a summer install, and say clearly when it ends.
Example: a fuller summer
Example (fictional): a four-engineer firm in Northampton had two engineers underused most of the previous August. This year, in April it offered summer services to customers due in the autumn, booked three letting agents' portfolios into July, and quoted for two school boiler rooms over the summer holiday. It surveyed heat pump and boiler replacement leads from its job records in May and June, and booked installs through July and August. Training renewals and van refits went into the remaining gaps. In October, its planned work was a third lower than the previous year, leaving room for the switch-on rush.
Measure it
Track engineer utilisation by month, services completed by month and installs booked by month. The aim is not a perfectly flat year, which a heating firm will never have, but a summer with purpose and an autumn with room. For moving services in detail, see spreading annual services across the year. For installs, read selling boiler replacements in summer, and for refurbishment work, the spring bathroom season.
Frequently asked questions
How can a heating firm stay busy in summer?
Move annual services and landlord checks into summer, focus on boiler and heat pump installs, add bathrooms and small works, and contact commercial customers about summer maintenance.
Can we bring a landlord's gas safety check forward to summer?
Yes. Checks must be no more than 12 months apart[3], so an earlier check resets the cycle for future years.
What grants can customers get for heat pumps?
In England and Wales, the Boiler Upgrade Scheme offers £7,500 towards an air source or ground source heat pump[2], with an extra £1,500 for homes off the gas grid until March 2027[6].
Is summer the right time for staff holidays?
For most heating firms, yes. Planning leave in July and August keeps October and the winter fully staffed.
References
Department for Energy Security and Net Zero (2026). Energy Trends: UK gas, ET 4.1 natural gas supply and consumption (quarterly), September 2026 (opens in a new tab) ↑
GOV.UK (2026). Apply for the Boiler Upgrade Scheme: what you can get (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2003). The Privacy and Electronic Communications (EC Directive) Regulations 2003, regulation 22 (opens in a new tab) ↑
GOV.UK (2026). Apply for the Boiler Upgrade Scheme: what you can get (opens in a new tab) ↑
GOV.UK (2026). Apply for the Boiler Upgrade Scheme: what you can get (opens in a new tab) ↑
Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑