Phones call handling

When do plumbing and heating calls peak?

When plumbing and heating calls peak across the year, week and day, how to find your own peaks in your call log, and how to staff phones and diaries.

Ava research teamPublished 7 min read

On this page
  1. The shape of the heating year
  2. The first cold snap
  3. Autumn: services, landlord checks and heat pumps
  4. Spring and summer
  5. Day and hour patterns: measure your own
  6. A staffing plan by season
  7. When the forecast turns cold
  8. Who answers at the peak
  9. Bank holidays and the Christmas week
  10. Example: moving work out of the peak
  11. Use the quiet months to sell the busy ones
  12. Frequently asked questions
  13. References

Key takeaways

  • The heating year has one huge peak: household gas use in the first quarter of 2026 was more than five times the level of the third quarter of 2025[1].
  • The first cold snap of autumn is the sharpest single surge for many firms; plan cover before the forecast turns, not after.
  • Autumn also brings services, landlord gas safety renewals and, increasingly, heat pump enquiries: September 2026 set a record for Boiler Upgrade Scheme applications[2].
  • Day-of-week and hour-of-day peaks vary by firm, so measure your own from a few months of call logs rather than relying on rules of thumb.
  • Use quiet months to sell services and maintenance plans so winter capacity goes on breakdowns.

The shape of the heating year

If you want to know when heating calls will come, look at how much gas homes burn. The government's quarterly energy statistics show the pattern clearly. UK household gas demand was 109,126 GWh in the first quarter of 2026, against 19,636 GWh in the third quarter of 2025, more than five times higher[1]. The same shape repeats every year: a high plateau from October to March, a steep drop in spring and a summer trough. Demand in the second quarter of 2026 was 10% higher than in the same quarter of 2025[3], a reminder that a cold spring can stretch the busy season.

UK household gas demand by quarterDomestic consumption, Energy Trends table 4.1; 2026 Q2 provisional
UK household gas demand by quarterLine chart. 2024 Q1: 103,414 GWh; 2024 Q2: 40,374 GWh; 2024 Q3: 22,138 GWh; 2024 Q4: 86,418 GWh; 2025 Q1: 111,142 GWh; 2025 Q2: 30,786 GWh; 2025 Q3: 19,636 GWh; 2025 Q4: 88,790 GWh; 2026 Q1: 109,126 GWh; 2026 Q2: 34,017 GWh.0 GWh50,000 GWh100,000 GWh150,000 GWh2024 Q12024 Q32025 Q12025 Q32026 Q22024 Q1: 103,414 GWh2024 Q2: 40,374 GWh2024 Q3: 22,138 GWh2024 Q4: 86,418 GWh2025 Q1: 111,142 GWh2025 Q2: 30,786 GWh2025 Q3: 19,636 GWh2025 Q4: 88,790 GWh2026 Q1: 109,126 GWh2026 Q2: 34,017 GWh34,017 GWh103,414 GWhUK household gas demand by quarterLine chart. 2024 Q1: 103,414 GWh; 2024 Q2: 40,374 GWh; 2024 Q3: 22,138 GWh; 2024 Q4: 86,418 GWh; 2025 Q1: 111,142 GWh; 2025 Q2: 30,786 GWh; 2025 Q3: 19,636 GWh; 2025 Q4: 88,790 GWh; 2026 Q1: 109,126 GWh; 2026 Q2: 34,017 GWh.0 GWh50,000 GWh100,000 GWh150,000 GWh2024 Q12026 Q22024 Q1: 103,414 GWh2024 Q2: 40,374 GWh2024 Q3: 22,138 GWh2024 Q4: 86,418 GWh2025 Q1: 111,142 GWh2025 Q2: 30,786 GWh2025 Q3: 19,636 GWh2025 Q4: 88,790 GWh2026 Q1: 109,126 GWh2026 Q2: 34,017 GWh34,017 GWh103,414 GWh

Source: Department for Energy Security and Net Zero, 2026[1]

Show the data
PeriodValue
2024 Q1103,414 GWh
2024 Q240,374 GWh
2024 Q322,138 GWh
2024 Q486,418 GWh
2025 Q1111,142 GWh
2025 Q230,786 GWh
2025 Q319,636 GWh
2025 Q488,790 GWh
2026 Q1109,126 GWh
2026 Q234,017 GWh

Boilers that sit idle through summer are switched on in bulk in autumn, and faults that were hidden for months show up at once. That is why many heating firms see their biggest single surge not in January but in the first properly cold week of October or November.

The first cold snap

The first cold snap combines three things: boilers firing up after months off, households that skipped their annual service, and customers who are suddenly anxious about the winter ahead. A useful public signal for when cold is serious is the Cold Weather Payment, which is paid for each seven-day period when the average temperature is zero degrees or below, between 1 November 2026 and 31 March 2027[4]. You do not need to wait for freezing averages to get busy, but forecasts heading towards those temperatures are a reliable sign that no-heat calls, frozen condensate pipes and burst pipes will follow.

Plan for the surge in September. Book holidays outside the first cold weeks, stock the common parts for the boilers you see most, and agree who will answer the phones when every engineer is out on breakdowns.

Autumn: services, landlord checks and heat pumps

Autumn is not only breakdowns. Customers book annual services before winter, letting agents chase gas safety records, and heat pump interest rises as people think about heating costs. September 2026 saw 9,738 Boiler Upgrade Scheme applications, 30% more than August and the highest monthly total since the scheme began[2]. Gas Safety Week, which ran from 14 to 20 September in 2026[5], also prompts calls from households reminded to get appliances checked.

Landlord work adds its own rhythm. Each gas appliance and flue in a rented home must be checked at intervals of not more than 12 months[6], so renewals cluster around the dates when you first took on each property. If many of yours fall in autumn, move some forward to the summer, a month or two early, to free capacity for breakdowns.

Spring and summer

As heating demand falls away, calls shift towards planned work: bathroom refits, boiler replacements customers put off during winter, quotes for heat pumps, outside taps and summer-house plumbing. The phone may be quieter, but the calls are longer and more often quote requests, which need a different kind of handling. Customers want a survey slot and a clear timescale rather than an engineer this afternoon.

Day and hour patterns: measure your own

Ask any heating office manager and they will tell you Monday mornings are mad. Often they are right, especially after a cold weekend, but day-of-week and hour-of-day patterns differ with your customer mix. A firm with lots of landlord work gets calls during office hours from agents; one that serves commuter towns may get more calls in the early evening. Rather than borrowing someone else's rule, pull your own call log and find out.

  1. Export three months

    Download inbound calls with date and time from your phone system. Include at least one cold month if you can.

  2. Remove noise

    Filter out your own team's numbers and obvious nuisance calls.

  3. Count by hour and weekday

    Make a simple grid of weekdays against hours and count calls in each cell. A spreadsheet pivot table does this in minutes.

  4. Overlay missed calls

    Count missed and abandoned calls in the same grid. The cells where both counts are high are where you lose work.

  5. Repeat each season

    Run it again in summer and winter. Your peaks will move.

A staffing plan by season

Matching phone cover and diary rules to the heating year
SeasonWhat drives callsPhone coverDiary tactics
September to OctoberServices, landlord renewals, first cold snap, heat pump interestFull office cover; overflow ready for the first cold weekHold some slots each day for breakdowns
November to FebruaryBreakdowns, no heat, frozen condensate pipes, burst pipesLongest cover hours; out-of-hours route clearTriage hard; move non-urgent work to quieter days
March to AprilLate breakdowns, replacements customers put offNormal coverOffer installation dates; start booking summer services
May to AugustBathrooms, quotes, installs, landlord checks brought forwardLighter cover; ensure quote calls get a fast replyFill the diary with planned work and services

When the forecast turns cold

  1. Check the forecast every Thursday from October onwards and decide by Friday whether next week needs extra phone cover.
  2. Switch the voicemail greeting to a winter version that asks for postcode, boiler make and whether anyone vulnerable is at home.
  3. Hold back one or two slots per engineer per day for no-heat calls with vulnerable occupants.
  4. Pause outbound marketing for routine work so the phones are free for breakdowns.
  5. Prepare a short message for customers you cannot reach quickly, with simple checks such as boiler pressure and thawing a frozen condensate pipe safely, where your engineers are happy for customers to try them.

Who answers at the peak

Knowing when calls peak is only useful if someone is free to answer them. In a small firm the peaks usually coincide with the moments everyone is busiest: the first cold morning, when every engineer is already on a breakdown and the office line is engaged. There are four realistic ways to add capacity for those hours, and many firms combine two of them.

  • Stagger the office day so someone starts early and someone finishes late, rather than both working nine to five.
  • Overflow busy and unanswered calls to an answering service for the peak months only, with a winter triage script.
  • Use an AI employee such as Ava to answer calls when the line is busy and in the evenings, take down the job and pass urgent ones to the engineer on call.
  • Give one engineer a lighter diary on cold days so they can take urgent call-backs between jobs.

Whichever you choose, test it before the first cold snap. A new overflow route that has never been tried tends to fail on the busiest morning of the year.

Bank holidays and the Christmas week

Bank holidays bunch demand at both ends. Calls build on the day before and arrive in a rush on the first working day after, alongside everything that went to voicemail. The Christmas period is the extreme version: families at home, guests staying and heating running all day. Decide well before December which days you will cover, whether you will answer the phone on the bank holidays and what your voicemail will say, then publish it on your website and profile. Customers accept limited cover far more readily than unexplained silence.

Example: moving work out of the peak

Example: a fictional heating firm finds that most of its annual services and landlord safety checks fall between September and November, exactly when breakdown calls climb. Over one summer it contacts landlords and service customers with renewals due in autumn and offers them a slot in July or August instead. Many accept. The following October the firm has noticeably more free engineer time for breakdowns, answers more calls in the first cold week and stops turning down urgent work from existing customers. The office also records a new winter greeting in September, rather than in the middle of the first surge.

Use the quiet months to sell the busy ones

The summer trough is the best time to sell annual services, maintenance plans and boiler replacements, because you have time to do them well and customers are not yet worried. Customers on a plan are easier to schedule and less likely to ring in a panic in January. Track which quiet-season campaigns produce calls with the methods in call tracking for plumbers, and keep an eye on the weekly numbers in the call statistics a heating firm should check as autumn approaches.

Frequently asked questions

When is the busiest time of year for heating engineers?

From October to March, following household gas use, with a sharp surge in the first properly cold week of autumn when boilers come back on after the summer.

Are Monday mornings really the busiest time for calls?

Often, especially after a cold weekend, but it depends on your customer mix. Count your own calls by hour and weekday over a few months to find your peaks.

How can a small firm cope with winter call peaks?

Plan cover in September, keep slots free each day for breakdowns, use overflow call handling in the worst hours and move services and landlord checks into summer.

Why do heat pump enquiries rise in autumn?

Households start thinking about heating costs as the weather turns. Boiler Upgrade Scheme applications reached a record monthly total in September 2026.

References

  1. Department for Energy Security and Net Zero (2026). Energy Trends: UK gas, ET 4.1 natural gas supply and consumption (quarterly), September 2026 (opens in a new tab) ↑

  2. Department for Energy Security and Net Zero (2026). Boiler Upgrade Scheme (BUS) monthly statistics: England and Wales, September 2026 (opens in a new tab) ↑

  3. Department for Energy Security and Net Zero (2026). Energy Trends: UK gas, ET 4.1 natural gas supply and consumption (quarterly), September 2026 (opens in a new tab) ↑

  4. GOV.UK (2026). Cold Weather Payment (opens in a new tab) ↑

  5. Heating and Hotwater Industry Council (HHIC) (2026). HHIC supports Gas Safety Week 2026 and urges households to 'Take No Chances' (opens in a new tab) ↑

  6. legislation.gov.uk (The National Archives) (1998). The Gas Safety (Installation and Use) Regulations 1998, regulation 36 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo