Key takeaways
- No government survey publishes a quote conversion rate for UK plumbing and heating firms, so treat any single ‘industry average’ with caution.
- Measure three rates, not one: enquiry to visit, visit to quote, and quote to won job.
- Split the figures by lead source and job type; a blended rate hides where you win and where you waste survey time.
- Competition has grown: registered plumbing and heating enterprises rose from 40,665 in 2021 to 47,910 in 2026[1].
- A very high win rate is a warning too: it often means your prices are below what the market will pay.
Why there is no single benchmark
Search for a ‘good’ quote conversion rate and you will find confident figures with no method behind them. The Office for National Statistics counts how many plumbing and heating businesses exist, how big they are and what they turn over, but it does not ask how many of their quotes turn into work. Trade surveys that do ask tend to mix boiler swaps with bathroom refits and repeat customers with cold enquiries, which makes the average meaningless for any one firm.
What the official data does show is that you are quoting against more people than you were. There were 47,910 VAT or PAYE-registered plumbing, heating and air-conditioning enterprises in the UK in 2026[2], and the count has climbed steadily since 2021[1]. About 95% of them are micro businesses with fewer than ten employees[3], so the firm you lose to is usually another small local outfit, not a national brand.
Source: Office for National Statistics (Nomis), 2021[1]
Show the data
| Item | Value |
|---|---|
| 2021 | 40,665 |
| 2026 | 47,910 |
The useful benchmark is therefore your own rate last quarter, broken down so you can see which part of the process is leaking.
Three rates, measured separately
A single ‘conversion rate’ blends very different moments. Split it into three and each one points at a different fix.
- Enquiry to visit: of the people who contacted you about a job that needs a survey, how many did you actually see? Low numbers point at slow call-backs, missed calls or poor qualification on the phone.
- Visit to quote: of the surveys you did, how many produced a written quote within your promised time? If this is below nearly all of them, your admin is the bottleneck, not your price.
- Quote to won job: of the written quotes sent, how many were accepted? This is the figure most people mean, and it is the one most affected by price, clarity and follow-up.
Count only written quotes. Under the Consumer Rights Act 2015, if no price is agreed the customer must pay a reasonable price[4], which is an argument you never want to have. A verbal ‘it'll be about…’ on the doorstep is not a quote, so it does not go in the denominator.
Worked Example: one firm, five lead sources
Example: a fictional two-engineer heating firm in Leeds logged every quote for a quarter and tagged each one with where the enquiry came from and what the job was. The blended quote-to-win rate looked healthy, but the split told a different story.
| Lead source (Example) | Quotes sent | Jobs won | Win rate | Average days to quote |
|---|---|---|---|---|
| Past customers | 18 | 14 | 78% | 1 |
| Referrals from customers | 15 | 9 | 60% | 2 |
| Search and map listing | 32 | 10 | 31% | 4 |
| Trade directory | 21 | 4 | 19% | 5 |
| Manufacturer installer finder | 9 | 4 | 44% | 3 |
In this Example, the directory leads cost the most survey time per job won: about five surveys for every install. Search leads were also quoted slowly. The owner's first change was not to cut prices but to send search and directory quotes within 48 hours, and to stop surveying directory leads who had not confirmed a rough budget on the phone.
Split by job type as well
Job type changes the rate as much as lead source does. A like-for-like combi swap is easy for a customer to compare, so win rates are usually lower and price-driven. A system conversion, a boiler relocation or a bathroom with a heating upgrade involves judgement, and the customer is buying your survey as much as your price.
- Like-for-like boiler replacement: expect the most competition and the most price comparison.
- Upgrades and relocations: the quality of the survey and the clarity of the scope do more of the selling.
- Bathrooms and larger refits: long decision times, so track the rate over a longer window.
- Landlord and agency work: often decided on response time and paperwork, not on the last few pounds.
Keep at least a quarter of data before you draw conclusions for any one category. With fewer than about twenty quotes in a bucket, one or two jobs swing the percentage wildly.
Set up tracking in an afternoon
Create one log
A spreadsheet or your job software: date of enquiry, source, job type, survey date, quote date, quote value, outcome, reason lost.
Record every enquiry, not just quotes
Otherwise you will never see the first leak. Missed calls count as enquiries you did not answer.
Add a lost reason
Choose from a short list: price, timing, went with someone they knew, no reply, decided not to proceed. ‘No reply’ is usually the biggest group.
Close quotes after 30 days
Mark any quote with no answer after a month as lost unless the customer has given a decision date.
Review monthly
Look at the three rates by source and job type. Change one thing at a time so you know what worked.
What a high or low rate is telling you
Use the rates as decision criteria rather than a score.
- Quote-to-win above roughly three in four on competitive work: test a higher price on the next batch. You may be leaving margin behind.
- Quote-to-win well below your own past average: check quote speed and follow-up before touching price. Slow, vague quotes lose more than expensive ones.
- Strong quote-to-win but weak enquiry-to-visit: the problem is the phone. Answer more calls, call back faster and qualify better.
- Good rates on repeat customers, poor on everything else: invest in reviews and in making your quotes easier to compare.
Trust matters more than many firms assume. Around a quarter of UK adults bought home maintenance and repair services in a year, and 11% of those reported a consumer problem[5]. The median loss from such a problem was £109[6]. Customers who have been burnt before read your quote for warning signs, so plain scope, named exclusions and a clear payment schedule all lift the rate.
Put a value on survey time
Win rate only matters because surveys cost time. A boiler survey with travel, measuring up and writing the quote can easily take half a day of an owner's week once admin is included. That time has a real cost: the median employee plumber or heating installer earned £18.82 an hour in 2026[7], and an owner's time, which could be spent on paid work, is worth more than that.
Example: if each survey and quote takes three hours and the firm wins one job in three from directory leads, every directory install carries nine hours of selling time. At a nominal £40 an hour for owner time, that is £360 of unbilled effort to recover from the margin on one job. The same firm winning three in four repeat-customer quotes spends four hours per job won. Neither number is good or bad on its own; the point is that a low win rate on a lead source is only acceptable if the jobs are big enough to carry the selling time.
- Work out hours per job won for each lead source: survey and quote hours divided by the win rate.
- Compare that with the gross margin on a typical job from that source.
- Where selling time eats a large slice of the margin, either qualify harder on the phone or charge for the survey on complex work and credit it against the job.
Reading your lost reasons
The ‘reason lost’ column is where the real learning sits, but only if you record it honestly. Ask every customer who declines, in one short message, what decided it. Most will tell you.
- Mostly ‘no reply’: your follow-up is the problem. Send a short check-in two days after the quote and again a week later, with a specific question rather than ‘any thoughts?’.
- Mostly ‘price’: look at which job types. If it is only like-for-like swaps, you may accept that and focus on upgrades; if it is everything, your quotes may not explain what the customer gets.
- Mostly ‘timing’: the customer needed the work sooner than you could offer. That is a capacity problem, and the fix is scheduling or a second installer, not a discount.
- Mostly ‘went with someone they knew’: invest in reviews, photos of finished work and referral requests from past customers.
Fix the top of the funnel first
Most small firms can improve the enquiry-to-visit rate faster than the quote-to-win rate. If the engineer is on a job when the phone rings, an unanswered call never reaches your log at all. Some firms use Ava to answer those calls, take down the job and book the survey, so the first number in the funnel is complete.
Start this week: tag your last 30 quotes by source and job type from memory and email history. It will be rough, but it will show you where to look.
Frequently asked questions
What is a typical quote conversion rate for a UK plumber?
There is no official figure. Rates vary hugely by job type and lead source: repeat customers convert far more often than directory leads. Measure your own over a quarter and compare it with your own past performance.
Should I count verbal estimates as quotes?
No. Count only written quotes with a price and scope. Verbal figures are not comparable and, if no price is agreed, the customer only has to pay a reasonable price[4].
How long should I wait before marking a quote as lost?
About 30 days for most domestic work, unless the customer has given you a decision date. Bathrooms and larger refits may need longer.
Is a high conversion rate always good?
Not on competitive work. Winning almost every quote often means your price is low for your area. Test a higher price on a small batch and watch what happens to the rate.
References
Office for National Statistics (Nomis) (2021). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
Office for National Statistics (Nomis) (2026). UK Business Counts - enterprises by industry and employment size band (SIC 2007 class 43.22), via Nomis (opens in a new tab) ↑
legislation.gov.uk (The National Archives) (2015). Consumer Rights Act 2015, section 51 (opens in a new tab) ↑
Department for Business, Energy and Industrial Strategy (GOV.UK) (2021). Consumer protection study 2022: understanding the impacts and resolution of consumer problems (opens in a new tab) ↑
Department for Business, Energy and Industrial Strategy (GOV.UK) (2021). Consumer protection study 2022: understanding the impacts and resolution of consumer problems (opens in a new tab) ↑
Office for National Statistics (2026). Annual Survey of Hours and Earnings 2026 provisional, Table 14 (occupation by 4-digit SOC 2020) (opens in a new tab) ↑